Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions.
The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3830kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.8m (15ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

Features:
90 HP single speed gearbox.
2050mm working width.
Side gear drive.
CE safety guards.
54 x C Blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 60-90 HP
Working Width: 2050mm
Working Depth: 100-200mm
Product Weight: 585kg
Total Width: 2300mm
Options:
Front Depth Wheels
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 2.05M B85 ROTARY HOE (MIN 60-90HP)

3.47m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3706 - 3.47m (11ft 5in) (16 Row) 1/15 Tine, 3/20 Tine - 77kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.47M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Series 08 - 5.18m Stump Jump Harrow System 4 Point Pull (2 Piece bars & master bar) - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8107 - 6 sections 5.18m (17ft).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 5.18m (17ft)
- Weight 325kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 5.18M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

300 series Mekfold Folding Power Harrow with 450mm cage roller
Specifications:
Tractor HP: 180-300
Working Width: 5920mm
Folded Width for Transport: 2500
Working Depth: 100-300
Blades: 48
Weight: 3140kg
Features:
- Single speed central gearbox (1000 RPM) and multi speed side gearboxes.
- Phased rotors.
- Stone protection system.
- Levelling bar standard.
- Floating side shields.
- Folded width 250cm.
- 450mm Cage roller standard.
- Konic - tapered roller bearings on MEKFOLD350.
- 1 3/4" 20 spline PTO with cam clutch.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 6M MEKFOLD300 POWER HARROW (180-300HP) WITH 450MM CAGE ROLLER

Series 08 - 8.63m Stump Jump Harrow System 4 Point Pull (2 Piece bars & master bar) - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8110 - 10 sections 8.63m (28ft 4in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 8.63m (28ft 4in)
- Weight 593kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 8.63M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

Series 37 1.83m Mounted Spring Tine Harrow System - Heavy Duty 3 Rank- Kinked Tines.
A Heavy Duty Spring Tine Harrow. Designed to fit onto the rear bar of Scarifiers and Chisel Plows to assist in breaking
down ground and seed bed preparation.
Complementing scarifiers and chisel plows, it will break down cloddy ground and aid final seedbed preparation.
Using larger 465mm (183/4) by 12mm Diameter tines with a 75mm (3) spacing, the Series 37 is put together using a heavier tine section frame.
Available in a 3 Rank model, it is supplied with two mounting arms for each section. Two sizes are available 1.83m (6) and 2.28m (76).
Experience the difference with our kinked tine designed to exert aggression in breaking down cloddy ground and final seedbed preparation.
Specifications:
- Coverage: 1.83m
- Weight: 146kg
- Tine spacing 75mm (3) 3 Rank.
- Tine Diameter 12mm Kinked Tine.
- Tine length 465mm (18 1/4) approx.
- Rank spacing 305mm (12).
- 2 Mount Arms per unit.
Features:
- Unit features two Mount Arms (Model 37004 with reinforced bolt-on clamp plate).
- Standard mount clamp suits 75mm to 100mm (3 to 4) square frames positioned on the flat.
- Adjustable Tine angle
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.83M MOUNTED SPRING TINE HARROW SYSTEM - HEAVY DUTY - 3 RANK

Series 35 Forged Tine Levelling Harrow System (Category L) "Extra Heavy" Harrow Sections including optional drawbar.
5 Rank (Length) Deep Harrow Sections (May be used with seeding combines, air seeders, etc.)
Model:
35005 - 15 Tine (3W x 5L deep) 2.3m wide (min) - this listings price. Heavy Duty drawbar options listed below (2.3m - 5.6m wide options).
Note: Picture shown first is 5 Rank (Length).
Information on the Harrow System:
- If you want to level your land and need a Harrow that will stand up to the demands of todays conditions, Murrays manufacture an Extra Heavy Levelling Harrow. Built from heavier High Carbon Steel, each Tine is specially forged revealing a diamond shape designed to level your ground. Tine spacing remains the same as our standard Series 03 version.
- The Series 35 is suitable for heavier clay type soils and is used after primary or secondary tillage. Available in three and four row widths allowing flexibility to build up Harrow Sections to suit the width of your primary machine. 100% Australian made and owned.
Specifications of the Harrow Sections:
- Tine Spacing 76mm (3in)
- Tine length 190mm (7 1/2in) approx.
- Centre to Centre of Front Hooks 235mm (9 3/4in)
Features:
- Forged Tine ends. Manufactured from 25 x 10mm carbon steel.
Heavy Duty Drawbars (only) options:
3074 - 7ft 7in (10 bar anchors) 9kg
3075 - 8ft 5in (11 bar anchors) 10kg
3076 - 9ft 2in (12 bar anchors) 13kg
3077 - 9ft 11in (13 bar anchors) 14kg
3078 - 10ft 8in (14 bar anchors) 15kg
3079 - 11ft 5in 16 row (15 bar anchors) 17kg
3080 - 12ft 2in (16 bar anchors) 21kg
3081 - 13ft (17 bar anchors) 27kg
3082 - 13ft 9in 20 row (18 bar anchors) 29kg
3083 - 14ft 6in (19 bar anchors) 31kg
3084 - 15ft 3in (20 bar anchors) 33kg
3085 - 16ft 24 row (21 bar anchors) 34kg
3073 - 16ft 10in (22 bar anchors) 36kg
3086 - 18ft 4in 28 row (24 bar anchors) 40kg
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.3M WIDE (3W X 5L TINES) EXTRA HEAVY DUTY LEVELLING HARROW (2.3M - 5.6M)

2.79m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3803 - 2.79m (9ft 2in) 4/15 Tine - 74kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

5 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
Rata Panerazer subsoilers are designed specifically for use in ground where compaction has occurred. All Rata subsoil aeration equipment features a double bar V frame construction for a better job and easier pulling.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build with 16mm wear protected legs securely bolted into mounts that are completely welded and gusseted onto the heavy RHS mainframe for strength.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 5 TINE/DISC SUBSOIL CULTIVATOR (120HP RECOMMENDED)

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Find Tillage AND Seeding For Sale. Browse 964 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

BREVIGLIERI 2.05M B85 ROTARY HOE (MIN 60-90HP)

MURRAY SERIES 03 LEVELLING HARROW 3.47M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

MURRAY 5.18M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

BREVIGLIERI 6M MEKFOLD300 POWER HARROW (180-300HP) WITH 450MM CAGE ROLLER

MURRAY 8.63M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

MURRAY 1.83M MOUNTED SPRING TINE HARROW SYSTEM - HEAVY DUTY - 3 RANK

MURRAY 2.3M WIDE (3W X 5L TINES) EXTRA HEAVY DUTY LEVELLING HARROW (2.3M - 5.6M)

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 5 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

RATA 5 TINE/DISC SUBSOIL CULTIVATOR (120HP RECOMMENDED)

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Farm Supplies Machinery & Equipment

Dealer Address