Farm Supplies Machinery & Equipment

Trailed air assist Stiletto 2,000 litre sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft with 913mm Antis fan.
Ideal for orchards with optional Bravo 180S automatic rate controller
Specifications:
Market: Horticulture
Tank Size (L): 2,000
Connection Type: Trailed
Min PTO hp: 70
Pump Size (L/min): 161
Height / Width / Length (mm): 1500 / 1700 / 4100
Product Weight (kg): 690 (dry)
Application: Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS1701: 161L/min. capacity 5000kPa pressure.
Fan Size: 913mm axial flow type, 9 bladed front intake fan with straight blades, centrifugal clutch for soft engagement/ disengagement and protective mesh cover.
Nozzles: 14 flip-over nozzle bodies for dilute/concentrate spraying with on/off. 7 ceramic hollow cone nozzles per side.
Gearbox: Oil-bath type, 2-speed with neutral position
Controls: 40 bar electric section valves, master valve, electric pressure adjustment and in cab control.
Tank: Polutuff impact resistant polyethylene construction, calibrated sight line, easy open lid, 40mm drain valve and built-in 15L fresh water tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator
Pressure gauge: 100mm, 0-60 bar glycerine filled gauge.
Filtration: Lid strainer, suction line strainer & stainless steel nozzle filters.
Wheel Equipment: Glideflex suspension axle, 15" tubeless tyres on galvanised rims (max speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 60 PTO HP
Options:
- Flotation tyres - 400/60 x 15.5" with fixed axle (in lieu of standard singles) (D99-80)
- Bravo 180S automatic rate controller (d99-143).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 2,000L TRAILED STILETTO ANTIS SPRAYER - MIN 60PTO HP

The Agrivator Aerators AV Series is a 3pt linkage mounted rolling tine aerator. Ideal for shattering and allowing water absorption into the soil and expansion of root zone in pasture and crops.
Made in Australia
Also available in Galvanised Body (optional).
Features...
- Heavy duty frame design
- Extra large capacity rotor bearings (greasable)
- High wear resistant tines
- Four rotors in all hydraulic frame models
- Cat 2 and 3 clevis hitch
- 4 x angle settings for rotors 0-10°
- Hydraulic fold up for easy access through gates & road transport
- Large diameter re-phasing cylinders with lock valves for safe transport
- Wing frames with weight bays
- Park stands x 7 for storage
- All Pre-Bracketed for optional extras
Specs:
- Aeration Width - 4100mm
- 80 tines
- 82kw/110hp min power required
- 1700kg weight
- 3000mm transport width
Agrifarm AV series Aerators are pre-bracketed in manufacture to suit Optional Extras. Please see these optional items below:
* (Optional) ASB Seeders and mounting kit are available for AV150, 200, 250, 300, 400, 400H, 500H and 600H...

* Available in modules of 900mm width

Mounted on rear RHS member of frame
Capacity 22 litres per module
* (Optional) Spring Tine Harrows available to suit AV150, AV200, AV250, AV300, AV400, 400H, 500H and 600H Aerators include...

* 2 rows of Spring Tines
* Quick 2 pin location for transport
* 2 pin removal if harrows aren't required
* Close to rear of machine for exceptional manoeuvrability.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM AV400H HYDRAULIC AGRIVATOR AERATOR SERIES (4M)

Key Features:
- Cutting Width: 6.2m
- Transport Width: 2.8m
- Five rotors with 30 heavy-duty blades
- 250hp input gearbox
- Slip clutch protection
- Hydragas suspension with walking axle
- 7-year gearbox warranty
The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
- Reinforced mega strength deck structure
- Built in shock absorbs
- LED light kit
- Full width walking axle
- Full width front & rear safety chains
- Heavy duty industrial tyres (wide)
- Premium long life shaft drive
- Universal drawbar for high or low towing
- Adjustable levelling tie bars
- Hydraulic wing lift and support
- Mechanical wing float support
- Full length side skids
- Slip clutch protection
- 111 HP rotor box
- Anti-scalp disc
- Heavy duty winged up draught blades
- 250 HP splitter box
- Integrated seal protector
- Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

This heavy duty professional range for tractors of up to 220hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QST/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 RPM.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patented removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 320 MULCHER INC HYDRAULIC SIDE SHIFT

Features Include:
220HP two speed gearbox (1000 RPM).
Phased rotors.
Stone protection system.
Leveling bar standard.
Floating side shields.
2940mm working width.
100 300mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF220-300CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 140-220 HP
No. of Blades: 24
Working Width (mm): 2940
Product Weight (kg): 1280
Total Width (mm): 3000
MF220-300PR Specifications (with optional Packer Roller):
Connection Type: Linkage
Min PTO HP: 140-220 HP
No. of Blades: 24
Working Width (mm): 2940
Product Weight (kg): 1480
Total Width (mm): 3000
Factory Options:
Wheel Track Eradicator
Superfast Blades
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI MEKFARMER 220 POWER HARROWS 2.94M - BREVIGLIERI - MF220-300CR, MIN 140-220HP

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

Heavy duty hydraulic folding mulcher suitable for tractors from 100-180 hp. Universal 10mm Y-shaped flails ideal for straw, grass, beet leaves and set aside areas.
Specifications:
Actual Width: 673cm
Working Width: 644cm
Required HP: 180-220hp
Weight: 3771kg
No of Blades: 144 Y shaped flails
Features:
180hp rated gearbox (Scorpio/P)
220 hp rated gearbox (Super Scorpio/P)
Integrated over-run clutch
Floating from linkage (cat 2)
Fixed front counter blades
Replaceable upper counter blades
Double skinned chassis
Side skids
4 x 4 belt side transmission
Opening rear doors
1000 rpm PTO
Front protection flaps
10mm Y-shaped flails with straight flail
Rear lights for road transport
Parking support
Options in lieu of standard:
Spreading fins (each) (400 = 12, 450 = 14, 500 = 16, 560 = 20, 640 = 24)
Rear wheel kit
Rear roller (Scorpio/P400 - P500)
Rear roller (Super Scorpio/P560)
Rear roller (Super Scorpio/P620)
Hydraulic door opening
Hammer flails in lieu "Y" flails (Scorpio)
Hammer flails in lieu "Y" flails (Super Scorpio)
Disc kit
Models:
SCORPIO/P 400 404cm Working width 100-180hp 2296kg 88 Blades
SCORPIO/P 450 454cm Working width 120-180hp 2410kg 96 Blades
SCORPIO/P 500 504cm Working width 140-180hp 2524kg 112 Blades
SUPER SCORPIO/P 564cm Working width 160-220hp 3300kg 128 Blades
SUPER SCORPIO/P 644cm Working width 180-220hp 3771kg 144 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 6.44M (180-220HP) SUPER SCORPIO/P 640 GENERAL PURPOSE MULCHER

30,000L storage silos suitable for all types of liquid supplements, dry feed and fertiliser storage.
Polymasters Cone Bottom Tanks provide the ultimate storage solution for dry bulk and liquid storage or processing applications.
- Steep 50 degree cone
- Heavy Duty DuraGal frame (other materials available)
- Fork channels integrated into frame
- Ideal for sludge clarification and thickening applications
- Multiple outlet options available Liquid or Dry
- Custom pipework can be installed
Heavy Duty Frame 3,450 Dia x 5,363 H (mm)
- Durable Construction
- A One-Piece tank moulded from UV Stabilised, Food Grade MDPE and mounted to a fully Galvanised support structure.
- Re-locatable
- For ease of repositioning, the support structure incorporates fork channels which allow the silo to be moved with a minimum 2 tonne Fork truck when empty. (For Static Storage with Heavy Duty Frame option only)
- Hinged lid for easy access
- Rodent and weatherproof
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 30,000L CONE BOTTOM TANK (LIQUID OUTLET)

Consuming 100,000 tons of high quality Swedish steel annually, UNIA is the largest manufacturer of agricultural machines in Poland with nearly 25,000 machines sold per year, of which over 10,000 are exported to 60 countries around the world, including right here in Australia.
Designed for pre-sowing and stubble tillage
Based on 2 rows of discs that provide easy cutting of the soil intense mixing any plant residues with hay. Can operate as seedbed combination unit due to the possibility of extending it of a carriage with draw-bar for the semi-mounted version.
High area performance at low fuel consumption and low wearing rate. Possibility of extension to the semi-mounted or Drive versions (on the tyre and transport roller, ø670 mm)
Features:
Weight With Roller: 2,470 KG
Power Demand: 120-150 HP
No. Of Discs: 32
Suspension axle: 70-825/36 mm
2 rows of 560/4 mm CLASSIC toothed discs, protected by 35x190mm or 42×160 mm shock absorbers (version 4H)
Maintenance-free hub with triple lip seals
600 mm pipe roller
Mechanical / Hydraulic adjustment of working depth
Row of spring levelling fingers
Rigid frame (versions 34)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

UNIA ARES XL 4M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL4, 120-150HP

3.5M Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available.
Features:
Double clamp bolt-on-legs (R9-R13)
Welded leg brackets (R15-R21)
Adjustable leaf spring
Heavy duty 100 x 100mm box section
Adjustable rubber depth wheels
865kg breakout
Reversible chisel point
Rubber depth wheels
Solid steel legs
Models:
R9-3 3m Fixed Frame (125-200hp)
R11-3 3m Fixed Frame (125-200hp)
R13-3.5 3.5m Fixed Frame (125-200hp)
Options:
Rubber depth wheels ( 2 x 600-9)
Wing share (each)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMGARD 3.5M, 13 RIPPERS (125-200HP) FIXED FRAME HEAVY DUTY RIPPER

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ80 Specifications:
Oil Flow: 48 - 33
HP Range: 180 - 270
Buckets That Suit This Loader:
2.05, 2.2, 2.4, 2.6 Heavy Duty Gravel Bucket
2.1 - 9000, 2.4 9000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll attachment Components - less load on the Tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - best view plus high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ80 FRONT END LOADER (180 - 270 HP) (48 - 33 LPM)

The Munro AutoDriver is the machine of choice for contractors, vineyard operators and government departments. Available in this model 730, 900 or a 1300 version. 730 means 730 Joules (impact) of energy up to 950 times per minute.
Capable of installing posts up to 8ft (Standard) and 11ft for this TeleSett model, the AutoDriver combines in one machine, a fast action rock-breaker style hammer that does not leave the top of the post when driving and an hydraulic auger for drilling pilot holes.
The AutoDriver has a patented down force system that can add a percentage of the tractor mass to the driver, making it the most efficient machine on the market. Without this down force system, these types of machines lose most of their efficiency trying to drive the machine up instead of the post down.
The AutoDriver driving function is a one handed operation allowing operators to adjust the machines tilt whilst driving to ensure a straight post. The auger is hydraulically engaged and stowed and can have down force applied.
The system is easy to operate. Its speed and accuracy of setting makes it the most efficient and value-for-money machine on the market.
Combines in one machine, a fast action earth auger for drilling a pilot hole, with a powerful post driver for setting a tight post every time.
Handles all types of posts with ease...
Steel
Star
Treated pine
Concrete
Split
Square
Round
Railway sleepers
Powerful, Flexible, Tough
The safest and most efficient machine on the market
Automatic hammer does not leave the top of the post.
Single handed hammer and combined down force operation
Hydraulically engaged auger
Hydraulic reversible auger drive with a wide range of augers for different post sizes and ground conditions.
Drills to 1200mm (4)
Forward, aft and sideways tilts combined with a wide base and two separate stability pads allows safe and efficient operation on hills or sloping ground.
Precise ergonomically located controls allow posts to be set quickly and accurately without fuss.
Has low overall height but still copes with normal posts
Firm and Fast post setting, with feather touch controls
Comes in telescopic version for taller posts
Optional Items include...
TAD (Tractor Added Down force to deliver full energy
Power Pack Kit with Oil Cooler
Side Shift
Double Side Shift
Guide Rings per ring
FenceMate Hydraulic wood borer
Skid Steer attachment plate
Guide ring carrier
FEL mounted wire winder (Euro Hitch)
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO 900 AUTODRIVER TELESCOPIC POST DRIVER

Farm Supplies Machinery & Equipment offer quality new and used listings for sale. Click here to search and view their latest stock list on tradefarmmachinery.com.au

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 2,000L TRAILED STILETTO ANTIS SPRAYER - MIN 60PTO HP

AGRIFARM AV400H HYDRAULIC AGRIVATOR AERATOR SERIES (4M)

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

MUTHING MU-PRO 320 MULCHER INC HYDRAULIC SIDE SHIFT

BREVIGLIERI MEKFARMER 220 POWER HARROWS 2.94M - BREVIGLIERI - MF220-300CR, MIN 140-220HP

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 26 INCH 6MM SCALLOP DISCS - 0873, SUIT 75-165HP

CELLI 6.44M (180-220HP) SUPER SCORPIO/P 640 GENERAL PURPOSE MULCHER

POLYMASTER 30,000L CONE BOTTOM TANK (LIQUID OUTLET)

UNIA ARES XL 4M CUT SPEED DISC CULTIVATOR - UNIA - ARESXL4, 120-150HP

FARMGARD 3.5M, 13 RIPPERS (125-200HP) FIXED FRAME HEAVY DUTY RIPPER

BURDER STOLL FZ80 FRONT END LOADER (180 - 270 HP) (48 - 33 LPM)

MUNRO 900 AUTODRIVER TELESCOPIC POST DRIVER

Farm Supplies Machinery & Equipment

Dealer Address