Farm Supplies Machinery & Equipment

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1700kg
No of bearings: 8
No of axles: 4
Cutting width: 2.3m (7ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 24 INCH 5MM SCALLOP DISCS - 0850, SUIT 75-165HP

A robust harrow ideal for pasture renovation, landscaping, horse arenas, race tracks, sports fields and for seed/fertiliser incorporation.
Features:
12mm scarifier tines break up manure, loosens hard surfaces and increases aeration which in turn stimulates new growth.
12mm rear smudger bars spread manure and help level the ground.
Simple flexible design follows the ground contours without tangling up.
Self cleaning flexible action.
Trailing design with sturdy 100×50 channel iron draw bar and 12mm towing chain.
Trailing weights 2 on 6ft (1.8m)
Optional lifting frame available for easy transporting.
Very low maintenance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 6FT PASTURE HARROWS - 0402

3.47m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3706 - 3.47m (11ft 5in) (16 Row) 1/15 Tine, 3/20 Tine - 77kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.47M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The Deep Tillage plough is designed for shattering compact ground with minimal disturbance to the sub soil. Ideal for ripping hard ground prior to cultivation and for aerating pastures, therefore increasing water absorption.

JOHN BERENDS DEEP TILLAGE PLOUGHS 11 TINE - 0326, MIN 165HP

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions.
The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3830kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.8m (15ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

3.25m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3505 - 3.25m (10ft 8in) 2/12 Tine, 2/16 Tine - 58kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Series 38 Manual winch rigid frame with 2 section rigid S44 Broadacre Stump Jump Harrow. 1.72m. Transport width: 1.79m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.72M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

Medium duty rotary hoe with gear side drive. Suitable for tractors up to 55 hp.
Specifications:
Actual Width: 175cm
Working Width: 160cm
Required HP: 25hp
Weight: 310kg
No of Blades: 36
Features:
Rated up to 55hp
Single speed gearbox
540 rpm
Side gear drive
70 x 7mm "L" blades
200mm working depth
Side-skids
Foot stand
Slip clutch
Models:
APLHA 155 160cm Working Width 25-55hp 310 kg 36 Blades
APLHA 165 175cm Working Width 25-55hp 322 kg 36 Blades
APLHA 185 185cm Working Width 30-55hp 330 kg 42 Blades
APLHA 155 155cm Working Width 35-55hp 342 kg 42 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.6M (55HP GEARBOX) ALPHA ROTARY HOE

Rigid box construction rotary hoes suitable for ground preparation on small farms and market gardens.
Features:
40 HP single speed gearbox.
1250mm working width.
Side chain drive with auto tensioner.
24 x C blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 20-40 HP
Working Width (mm): 1250
Working Depth (mm): 50-150
Product Weight (kg): 200
Total Width (mm): 1390
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.25M B40F ROTARY HOE (MIN 20-40HP)

Berends Linkage Offset Discs - Medium Duty
10 Plate - 18in x 4mm scallop discs
These medium duty offset discs are designed for small to medium size tractors. They are fitted with 28mm (1 1/8) square high tensile gang bolt axles and high quality triple sealed bearings.
The 10, 12, 14 and 16 plate machines have four bearings whilst the 18 plate has 6 bearings.
The 10 and 12 plate models are supplied with a single boom main frame with a support bar between the gangs whilst the 14-18 plate are supplied with a double boom main frame.
Adjustment is very simple, the U bolts which clamp the gangs on are simply loosened and the gangs can be adjusted laterally and for angle.
The standard set-up for an offset discs is the front gang running at a 21 angle whilst the rear gang is set at 23.
There is an art to setting up a disc, but if you have lateral and full angle adjustment - as these discs have - you are able to set a disc to give a level finish.
Features:
Disc type Scalloped Boron Coated
1 1/8 (28mm) square high tensile axles
Triple sealed bearings
10 and 12 plate models on single bar frame and 14 to 18 plate models on double bar frame.
Model:
0247 - 10 Plate - 18in x 4mm scallop discs
All prices include GST.
Dealer enquiries welcome.
Finance is now available.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 10 PLATE X 18 INCH DISCS - 0247, MIN 20HP

The most renowned and popular air seeder, available as a stand alone unit, or fitted up ready to go on a Celli power harrow or spikes rotor. All seeders include a low hopper sensor as standard, and come with 4 sowing shafts to cover a large range of seeds.
Features:
300 (PS300) or 500 (PS500) Litre Hopper
Electric Fan (PS300)
Hydraulic Fan (PS500)
8 Outlets
4 seed rollers/sowing shafts
5.2 control box
8m power cable
Calibration button
Fill level sensor
25m of hose
Agitator
Calibration slide
Counter plate
Calibration bag
Seed scale
8 splash plates
4 x 1.2m Hex bars for mounting plates
Models:
PS 300 Electric Fan
PS 500 Hydraulic Fan
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI PS 500L AIR SEEDER (HYDRAULIC FAN)

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3290kg
No. of Bearings: 12
No. of axles: 4
Cutting width: 3.43m (11ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

Find Tillage AND Seeding For Sale. Browse 980 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 24 INCH 5MM SCALLOP DISCS - 0850, SUIT 75-165HP

JOHN BERENDS 6FT PASTURE HARROWS - 0402

MURRAY SERIES 03 LEVELLING HARROW 3.47M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

JOHN BERENDS DEEP TILLAGE PLOUGHS 11 TINE - 0326, MIN 165HP

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 40 PLATE X 26 INCH DISCS - 0963

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

MURRAY 1.72M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

CELLI 1.6M (55HP GEARBOX) ALPHA ROTARY HOE

BREVIGLIERI 1.25M B40F ROTARY HOE (MIN 20-40HP)

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 10 PLATE X 18 INCH DISCS - 0247, MIN 20HP

CELLI PS 500L AIR SEEDER (HYDRAULIC FAN)

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

Farm Supplies Machinery & Equipment

Dealer Address