Farm Supplies Machinery & Equipment

This rear mounting hydraulic folding six metre mulcher is German engineering at its best.
Ideal for both pasture and stubble management along with general wide area mulching.
Manufactured from high quality QSt/E Steel with Headstock Cat. II & III for rear mounting.
Recommended for tractors 140-250HP.
Four rubber trailing wheels with 360° swivel.
Features:
Manufactured from High Quality Qst/E Steel with Headstock Cat.II & III for rear mounting.
Four rubber wheels, 360° swivel, height adjustable, 23X10.50-12.
Gearbox with integrated over run clutch for 1000 r.p.m.
Automatic belt tensioning.
Hood wear plates.
Hydraulic transport safety lock at an angle of 90°.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Well balanced spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Patented removable shredding bar System : Shark Fin.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the wheels guarantees perfect contour following and an even quality of cut.
Two single acting spool valves requested.
PTO shaft with cap bottom lubrication.
Warning signs and lights (LED mounted).
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Scrapper rail for MU-M/F 600 Vario (2 units must be ordered for entire working width).
Additional protection device for heavy duty work in extremely stony conditions.
Second screw-type short chopping bar system: "shark-fin design" - A Muthing patent (2 units must be ordered for entire working width).
Hydraulic powered central strip mulcher.
Operating hours counter with sensor, time recording via angular momentum.
Quick-hitch adapter, Cat. 3.
Model:
MU-M600 41.1 (4 Wheels) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
MU-M600 41.2 (Support Rollers) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

Working Width = 1,500 mm (59")
Weight = 3,300 kg
Min HP = 120 hp
In continuous development since 1985, the Drainmaster provides an effective solution to improve and accelerate the downward movement of moisture without the need for full surface renovation. Ideal for natural grass sports surfaces and golf courses where standing water is an issue, the Drainmaster helps reduce surface wetness and increase available playing hours.
Within just a few weeks, the grass regrows to reveal a more stable surface, improved turf quality and long-lasting drainage performance. The Drainmaster attaches to your tractor and mills 4cm wide trenches perpendicular to the existing drainage system using parallel cutters. Removed material is discharged via a conveyor belt into a collector or container. The machine then backfills the trenches with sand, which is consolidated by the rear wheels to leave a clean, level finish.
Developed with expertise from GKBs contracting division, the Drainmaster combines robust build quality with user friendly operation. The precisely designed hopper allows efficient coverage of a full pitch length in one pass, or across the width in two passes.
Key Features:
- Linkage: Drawbar eye
- Sandbunker Capacity: 4.0m³
Optional Extra:
DM15.HD - Heavy Duty Kit (fraising wheels and chisels)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GKB MACHINES 4.0M3 DRAINMASTER / TRENCHER (120+ HP) SPORTS TURF

7 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
304 Auto Reset Panerazers are the ultimate sub soiling machine. Especially when the soils to be aerated are heavy & full of obstructions.
Being auto reset makes your sub soiling job seamless as the legs simply lift over any obstruction & immediately reset automatically so you can continue aerating your soils without stopping. Leaf spring reset has a great advantage over rams, not only do they require less maintenance, but the legs are at the highest point of resistance while in the ground & resistance reduces as they lift.
This ensures the legs do not tip falsely but ensures they do clear obstructions when struck.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build RHS main frame construction with reinforcing to cope with hard conditions. The wear protected legs are also securely bolted into the reset mounts.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
The auto reset system is powered by heavy duty leaf springs mounted on each leg. Leaf springs reset immediately after tripping & clearing the obstacle unlike other reset systems such as hydraulic. This tension is easily adjusted via the 'tension bolt' mounted on the leg. This enables the operator to adjust the tension to the ideal level required for the ground they're operating in. The tension adjustment spanner is included with the implement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 7 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

The Wiedenmann Terra Core M6 is a high-performance walk-behind aerator, purpose-built for golf greens, tees, and fine turf areas where precision matters most.
Delivering powerful aeration without the need for large machinery, it combines efficiency, control, and ease of use ideal for high-quality turf maintenance in confined or sensitive spaces.
Features:
- Deep Aeration Performance: Penetrates up to 15 cm, relieving compaction and promoting deeper root growth for improved water and nutrient uptake.
- Precision & Consistency: Intelligent two-wheel drive ensures accurate hole spacing and reliable performance, even on slopes, across a 132 cm working width.
- Compact Productivity: Walk-behind design delivers strong output with excellent manoeuvrability perfect for greens, tees, and tight-access areas.
- Smooth Operation: Proportionally controlled steering and an integrated gauge roller maintain traction, control, and consistent working depth over uneven ground.
- Quick Adjustments: Central depth adjustment and delay mode allow fast, precise setup and accurate start/stop positioning around obstacles.
- Minimal Downtime: Replaceable tine holders enable quick, single-screw tine changes to keep you working efficiently.
- Operator Comfort: Ergonomic one-handed operation and integrated storage improve ease of use and convenience on the job.
- Optional Add-On Versatility: Available with trailing roller, windrow deflector, turf retainer, and lighting kit to suit a range of conditions and applications.
Weight = 890 kg
Optional Items:
1237950 - 4 x 12 mm tine holders (6 required in total)
1237960 - 4 x 19 mm tine holders (6 required in total)
1237970- 6 x 12 mm tine holders (6 required in total)
1237973 - 8 x 8 mm tine holders (6 required in total)
1290068 - Turf Retainer Set 6x6
1290069 - Turf Retainer Set 8x6
12990077 - Spring Loaded Roller
12990088 - Core Swath Board
1290066 - Lighting System
1290088 - Set of Coring Tines
11049600 - Additional Year Warranty Extension (24 months total)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WIEDENMANN 1.3M WALK BEHIND AERATOR

Super heavy duty, high clearance folding rotary hoe (Spike & Anti-pan rotor options available , suitable for tractors up to 360 hp.
Specifications:
Actual Width: 616cm
Working Width: 591cm
Required HP: 240-360hp
Weight: Cage roller - 3600kg, Packer roller - 3900kg
No of Blades: 138
Features:
Rotary hoe
Rated up to 360 hp
Hydraulic folding with safety locks and 2.5m transport width
80 x 10mm 'L' or 'C' shaped blades(options for 10mm blades, spikes rotor or antispan rotor)
Double welded blade flanges
16mm blade bolts
1000 rpm
Unique central split gearbox system for high horsepower loading and efficient torque distribution
Two speed side gearboxes with available gear speeds of: 208,230,260,284,310,340,375,410
2 piece split tailgates with dual manual angle adjustment
High clearance under hood
Gear side drive
Category three hitch, suitable for quick hitch (floating or fixed bottom links)
Grease lubricated centre drive bearings
Central loosening tine for 5mm bed gap
250mm working depth
Cam clutches on side driveshafts
Rear light frame with LED lights and AU Hazard panels
1 3/4 20 spline heavy duty front driveshaft
2 year warranty
Accessories:
450hp gearbox
Oil cooler with reservoir on central gearbox
Oil coolers with reservoir on side gearboxes
Front sod breaking disks (pair)
Track eradicators (set of 4)
'C' (speed) blades in lieu of 'L' blades
Options in Lieu of Standard:
Rotor Options
Double flange rotor (c/w 10mm blades)
Spike rotor spike (30x30x195)
Anti-pan rotor (10mm straight blade)
Roller Options
Cage roller (500mm diameter) with hydraulic adjustment
Packer roller (555mm diameter) with hydraulic adjustment
Models:
SUPERTIGER360P-500 491cm Working Width 200-360HP 114 BLADES
SUPERTIGER360P-500 541cm Working Width 220-360HP 126 BLADES
SUPERTIGER360P-600 591cm Working Width 240-360HP 138 BLADES
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 5.91M (240-360 HP) SUPER TIGER ROTARY HOE

MJ30-920 Mulching Slasher with rear wheels ideal for macadamias (180-250hp)
The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
9.2 metre working width
3PL
10 rotors
weight 3099kg
180-250HP
Ideal Macadamias, also stubble, pasture, solar farms
Twin wing - folding
Rear wheels in lieu of rollers
Mulch and slash
Model:MJ30-920WFARW
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 9.2M MJ30 MULCHING SLASHER INC FRONT AND REAR WHEELS 180-250HP

3,000L Paddock Pak. BP130/20 pump, 3 section electric valve controls, 18m boom.
Specifications:
Tank Size (L): 3,000
Connection Type: Trailed
Pump Size (L/min): 132
Features:
Pump: Silvan self-priming oil backed diaphragm pump. BP130/20: 132 L/min. capacity 2000kPa pressure.
Boom: Hydraulic lift, fold and tilt with parallel arm boom suspension, nitrogen accumulator and spring-loaded breakbacks. Galvanised boom with stainless steel spraylines. Minimum 3 sets of hydraulic remotes required.
Controls: 3 section Silvamatic electric controls with pressure compensating direct acting valves. In cab on/off & pressure adjustment with pressure gauge.
Tank: Polytuff impact resistant polyethylene construction with calibrated sight line & non-spill screw down lid.
Flush Tank: 100L
Frame: Galvanised RHS steel construction with adjustable drawbar and operator platform.
Agitation: 2 stage agitation. Bypass action and Venturi agitation.
Filtration: Lid strainer, suction line filter.
Wheel Equipment: 2m track axle with 14.9 x 24" lug tyre
Bottom Fill: Bottom fill valve with camlock coupling.
Options:
- BP200/20 pump, 195 L/min. capacity, 2000kPa pressure
- Hydraulic drive centrifugal pump
- 5 section Silvamatic electric controls (in lieu)
- Bravo 180S automatic rate controller (in lieu)
- Bravo 180S automatic rate controller to suit hydraulic control (in lieu)
- Bravo 400S automatic rate controller with GPS guidance (in lieu)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console)
- Mudguards (to suit 14.9 x 24 wheels)
- Adjustable track axle (minimum 1500mm) with 11.2 x 44 Lug tyres (2500L only)
- 57L Paddock Foam Marker
- Venturi suction probe
- Silmix Chemical Hopper
- 3 Section electric over hydraulic control
- 5 Section electric over hydraulic control
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L PADDOCK PAK TRAILED SPRAYER (18M BOOM)

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ80 Specifications:
Oil Flow: 48 - 33
HP Range: 180 - 270
Buckets That Suit This Loader:
2.05, 2.2, 2.4, 2.6 Heavy Duty Gravel Bucket
2.1 - 9000, 2.4 9000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll attachment Components - less load on the Tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - best view plus high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ80 FRONT END LOADER (180 - 270 HP) (48 - 33 LPM)

Size = 1 "
Suits 19mm hose
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1" HOSETAIL (SUIT 19MM HOSE)

Screw in bottom gudgeon & Screw in hinge strap pack to suit 25NB gates - Zinc
Price is for one item.
Available in packs of 6.
Australian made.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS SCREW IN BOTTOM GUDGEON & SCREW IN HINGE STRAP PACK TO SUIT 25NB GATES - ZINC

Diesel Transfer tank are one of the most versatile storage tanks available.
Designed so that you can use them in many situations, including on a trailer, on the back of a flat bed or fixed in one location on site. They provide operators with a cost effective diesel storage and dispensing solution.
Dimensions : 1,190 W x 1,500 L x 1,124 H
Capacity : 1,200 L
Features:
- Pin mounting feet to secure to a trailer or flat bed
- Lockable filling port
- 70 LPM Piusi 12V diesel pump
- 4mtr delivery hose
- Automatic trigger nozzle + holder bracket
- Telescopic suction pipe
- Strainer
- Mushroom breather
- 5-year warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 1,200L (240V) DIESEL TRANSFER TANK

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.Blade can be reversed for back filling.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 5ft
Mouldboard Thickness: 6mm
Mouldboard Height: 350mm
Tractor HP: 16-35
Weight: 115kg
Options:
0001 Grader Blade Wheel Kit
0418 Boxed ends suit Standard model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STANDARD DUTY GRADER BLADES 5FT (1.5M) - 0016, SUIT 16-35HP

Find Farm Machinery For Sale. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

GKB MACHINES 4.0M3 DRAINMASTER / TRENCHER (120+ HP) SPORTS TURF

RATA 7 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

WIEDENMANN 1.3M WALK BEHIND AERATOR

CELLI 5.91M (240-360 HP) SUPER TIGER ROTARY HOE

MAJOR 9.2M MJ30 MULCHING SLASHER INC FRONT AND REAR WHEELS 180-250HP

SILVAN 3,000L PADDOCK PAK TRAILED SPRAYER (18M BOOM)

BURDER STOLL FZ80 FRONT END LOADER (180 - 270 HP) (48 - 33 LPM)

SILVAN 1" HOSETAIL (SUIT 19MM HOSE)

LEMPRET WIRE & SEALANTS SCREW IN BOTTOM GUDGEON & SCREW IN HINGE STRAP PACK TO SUIT 25NB GATES - ZINC

POLYMASTER 1,200L (240V) DIESEL TRANSFER TANK

JOHN BERENDS STANDARD DUTY GRADER BLADES 5FT (1.5M) - 0016, SUIT 16-35HP

Farm Supplies Machinery & Equipment

Dealer Address