Farm Supplies Machinery & Equipment

Medium pressure straight lance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 24" MEDIUM PRESSURE STRAIGHT LANCE

Trailed over row 2 row 3,000 litre turbowrap turbomiser sprayer with a hydraulic drive 350 L/min stainless steel pump, 500mm turbine fan, sprayheads, automatic spray rate controller, wide angle shaft and tandem suspension axle.
Ideal for vineyards. Note: pictured is 3,000L Tri-Wrap.
Specifications:
Market: Viticulture.
Tank Size (L): 3,000
Connection Type: Trailed
Min PTO hp: 75
Pump Size (L/min): 350
Height / Width / Length (mm): 3480 / 1755 (less head), 2576 (folded) / 4850
Product Weight (kg): 1,500 (dry)
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms have independent hydraulic folding with adjustable width & centre frame. Boom frame is fully galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal.
Fan Size: 500mm twin impeller turbine fan. Power cons. 48 kw/64HP.
Nozzles: Air shear.
Gearbox: 2-speed with neutral position, oil-bath type
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Main Tank: Polytuff impact resistant polyethylene construction, calibrated sightline, flip top lid, 50mm camlock bottom fill, and hand wash tank. 205L flush tank on 3,000L.
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Venturi suction probe.
Agitation: Venturi agitator.
Pressure Gauge: Glycerine filled gauge located on the valve bank.
Filtration: Suction line filter and pressure filter
Wheel Equipment: Tandem suspension axle with 10 x 15" tyres (3000L) or 11.5 x 15.3" tyres (4000L).
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity (wide angle) driveshaft with quick release pins and safety cover.
HP Required: Minimum 75 PTO HP (2 row), Minimum 90 PTO HP (3 row).
Options:
- Quick turning hitch (D99-170)
- Hydraulic row width/height adjustment
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L (2 ROW) TRAILED TURBOWRAP - MIN 75PTO HP

Manual Top Link.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK HEAVY DUTY (CAT 3/3) (590MM MIN LENGTH, 765MM MAX LENGTH)

Round Linch Pin (bucket of 500).
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROUND LINCH PIN (500 PCS. LARGE BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

ARS Short Nose Fruit Snips - 160mm.
Weighs - 90g.
The 310T has short straight blades for harvesting wine grapes.
Made from high-carbon steel with black finish.
Made in Japan.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ARS SHORT NOSE FRUIT SNIPS - 160MM

- Pressure range 1 - 6 Bar
- Made of a two-piece polymer construction. Excellent chemical resistance, including acids, as well as exceptional wear life
- A lower pressure air inducted nozzle offers better drift management suitable for the broadacre market
- Compact size to prevent tip damage and removable pre-orifice
- Depending on the chemical, produces large air-filled drops through a Venturi air aspirator
Sizes Available: 015, 02, 025, 03, 04, 05, 06
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN AIXR AIR INDUCTION NOZZLE

This is the popular choice for farmers and builders when an economical and hardworking power source is needed to produce lots of watts (e.g. small air conditioners and cut-off saws).
This Gentech EP5900HSR Model is a versatile and tough genset popular with farmers, builders and other professional contractors. Powered by a GX340 Honda engine (which comes with a 3 year warranty), you get running power of 4700 watts and peak power of 5.9kVA. Designed to run your small to medium tools such as drills and saws as well as appliances like pumps and air-conditioners for satellite offices etc.
Protected by a steel rollover frame, two 15 amp outlets and a 6.5 litre fuel tank. Optional Extras include; long range fuel tank, earth leakage protection, wheel & handle kit, lifting bar, and electric start.
Complete with a 2 year generator warranty and backed by a comprehensive national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 5.9 kVA
Model Rating 0.8pf @ 50Hz: 5.9 kVA
Alternator Rating: 6 kVA
Engine Model: Honda GX340
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 68 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.50 L/hr
Operation Hours @ 80% Load: 2.60 hrs
Fuel Type: Petrol
Diam.: 735 x 545 x 545 mm (L x W x H)
Weight: 70 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 5.9 KVA PETROL GENERATOR (240V ENGINE POWERED)

PTO Adaptor.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO ADAPTOR - 1 3/8" FEMALE SPLINE, 6 X 1 3/8" MALE SPLINE, 163MM LENGTH

Stabiliser Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER PIN - 12MM HOLE DIA, 22MM PIN DIA, 7/16" UNF THREAD

The direct drive auger motor is fast and has about 400NM of torque. Operates with its own ram, allowing optimal down pressure and lift. (Not able to extract old posts). 

This auger motor can also be mounted to the RSE by using the RSE adaptor. Great operation to consider if you are battling in hard or dense clays. Able to drill up to 1200mm deep (can drill deeper on request).


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FENCE-PRO STANDARD AUGER MOTOR - NEARSIDE FARMTEK MAST MOUNTED KIT

325mm 4 Series auger (Standard conditions - Tungsten Carbide) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 325MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

PTO Shaft.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GARDLOC PTO SHAFT - 1,210MM LZ LENGTH, 1 3/8" X 6 SPLINE Q.R. TO 1 3/8" X 6 SPLINE Q.R.

Find Farm Machinery For Sale. Browse 7606 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 24" MEDIUM PRESSURE STRAIGHT LANCE

SILVAN 3,000L (2 ROW) TRAILED TURBOWRAP - MIN 75PTO HP

SPAREX TOP LINK HEAVY DUTY (CAT 3/3) (590MM MIN LENGTH, 765MM MAX LENGTH)

SPAREX ROUND LINCH PIN (500 PCS. LARGE BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

ARS SHORT NOSE FRUIT SNIPS - 160MM

SILVAN AIXR AIR INDUCTION NOZZLE

GENTECH 5.9 KVA PETROL GENERATOR (240V ENGINE POWERED)

SPAREX PTO ADAPTOR - 1 3/8" FEMALE SPLINE, 6 X 1 3/8" MALE SPLINE, 163MM LENGTH

SPAREX STABILISER PIN - 12MM HOLE DIA, 22MM PIN DIA, 7/16" UNF THREAD

FENCE-PRO STANDARD AUGER MOTOR - NEARSIDE FARMTEK MAST MOUNTED KIT

DIGGA 325MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

GARDLOC PTO SHAFT - 1,210MM LZ LENGTH, 1 3/8" X 6 SPLINE Q.R. TO 1 3/8" X 6 SPLINE Q.R.

Farm Supplies Machinery & Equipment

Dealer Address