Farm Supplies Machinery & Equipment

(Photos show x3 shanks, this model is single shank only)
Deep ripping is most effective in sandy textured soils where plant roots need to grow deeper to access subsoil moisture.
Deep ripping is of particular benefit when it is used to break through compacted layers, allowing roots to access soil water beneath this layer.
Where root growth is impeded by hard layers, a greater amount of energy is required for roots to grow through compacted soil, therefore production is usually reduced.
After removing the compacted layer by deep ripping, plant roots can grow faster and deeper, increasing the amount water and nutrients available to the crop, resulting in improved yield.
Tips:
Ground must be moist enough to allow ripping tines to penetrate below the compacted layer.
Soil must not be too moist that the ripper tines cause smearing rather than fracturing or shattering of the compacted layer.
Single Shank:
Category 2
110hp maximum requirement
Triple Shank:
Category 2 or 3
140hp maximum requirement
Adjustable width
Both Models Feature:
700mm working depth
30mm shank thickness
Safety shear bolt
Galvanised
Replaceable point
Daken sub-soil rippers are perfect for breaking up compacted and hard soil layers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CAT II SINGLE SHANK SUB SOIL RIPPER (MAX 110HP)

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2190kg
No of bearings: 12
No of axles: 6
Cutting width: 3.2m (10ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 6MM SCALLOP DISCS - 0862, SUIT 75-165HP

Model 44050 complete WITH 2 front connectors Series 44 Broadacre Stump Jump Harrow (2 point pull, Category C).
Options for this listing: Includes drawbar.
44002 - 1.72m with 2 sections (this listings price) 13kg
44003 - 2.58m with 3 sections (call for price) 20kg
44004 - 3.44m with 4 sections (call for price) 31kg
44005 - 4.3m with 5 sections (call for price) 51kg
44006 - 5.16m with 6 sections (call for price) 76kg
Note: The image on this listing only shows 1 section.
Information on the Broadacre Stump Jump Harrow:
- Break down clods, weed control and final seedbed preparation! Experience the difference with Murrays Series 44 known as the Broadacre Stump Jump Harrow. Featuring a Wrap Around tine design, which effectively creates the section frame, the Series 44 is manufactured using High Carbon Steel Forged tines.
- Our forging process shapes the tine into a diamond shape and will ensure that your tines are able to endure rough surfaces and clear your land with ease. The tines also feature greater layback which is designed for superior trash flow. Equipped with 2 pulling points per section, this Stump Jump is compatible with most makes of Hydraulic Drawbars. 100% Australian made and owned.
Specifications for the Stump Jump Harrow (44050)
Harrow weight: 44.2kg (97 1/4 lb)
Coverage: 0.86m (2'10")
Tine Spacing: 44mm (1 3/4in)
Tine Length: 248mm (9 3/4in) approx
Centre to Centre of Front Hooks 444mm (17 1/2in)
5 Ranks / 20 Tines
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.72M SERIES 44 STUMP JUMP HARROW INCL DRAWBAR (1.72M-5.16M)

Multiple interrow tillers manufactured by Breviglieri are mechanical PTO-driven machines designed for soil cultivation between rows of plants which have already reached a certain height (sunflower, maize, tobacco, cotton, beet, vegetables and flowers in general) and for nurseries.
The interrow tillers mechanically shred, scarify and aerate the surface layers of the soil, improving its natural fertility and virtually eliminating the need for herbicides and pesticides.
They also enable fertiliser use to be drastically reduced, resulting in considerably more abundant crop growth in a clean, eco-friendly environment and therefore greatly improved production yield per hectare.
These machines consist of a one-piece frame and a series of independent cutting elements, which can be adjusted based on the different types of row crop or nursery requirements. They can also be fitted with different accessories such as a fertiliser spreader and a folding frame for road transport.
5 types of MG4 models: Please note the price listed is for model MG4 220.
- MG4 220: 40-50HP, 220cm working width, 160kg
- MG4 280: 40-50HP, 280cm working width, 179kg
- MG4 360: 40-60HP, 360cm working width, 199kg
- MG4 440: 50-80HP, 440cm working width, 219kg
- MG4 310-P (Manual Folding): 50-80HP, 310cm working width, 250kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 237-440CM INTER ROW TILLER (40-80HP)

Heavy Duty robust constructed rotary hoe suitable for tractors up to 140 hp. Available with three different rotor options- hoe, spike or antipan.
Spike and antipan rotors are supplied with faster rotor speeds.
Specifications:
Actual Width: 307cm
Working Width: 285cm
Required HP: 110-140hp
Weight: 890kg
No of Blades: 66
Features:
Rated up to 140hp
540rpm (four speed) or 1000 rpm (two speed) gearbox
Swinging lower links
Gear side drive
80x8mm L blades
6 blades per flange
250mm working depth
Side skids
Two piece adjustable, spring loaded frangor tailgates
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike or Anti-Pan in lieu of hoe rotor (30x30x170mm or 10mm blade)
Pioneer 255 = 1145kg with cage, 1265kg with packer, 50 blades
Pioneer 280 = 1220kg with cage, 1340kg with packer, 55 blades
Pioneer 305 = 1295kg with cage, 1420kg with packer, 60 blades
Roller Options:
Cage Roller (440mm diameter)
Ergon 255
Ergon 280
Erogon 305
Packer Roller (470mm diameter)
Ergon 255
Ergon 280
Erogon 305
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Hydraulic tailgate adjustment - All models
Oil Cooler kit - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models:
PIONEER140F-255 260cm Working width 105-140hp 845kg 60 Blades
PIONEER140F-280 280cm Working width 110-140hp 890kg 66 Blades
PIONEER140F-305 310cm Working width 115-140hp 935kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.85M (110-140HP) PIONEER ROTARY HOES

Single Tyne Ripper - Up To 35HP - Galvanized- "Little Rippa", Adjustable Leg.
Rippers are a useful for around the farm, the single tine ripper can be used for preparing soil for crops or lawns.. The ripper can also be attached with the pipe layer attachment.
Adjustable leg model:
- Suits compact tractors Cat 0 and 1
- Depth 500-700mm
- Leg 100mm x 25
- Reversible point 300mm x 75mm x 15mm
- Weight: 42kg
Optional Pipe Layer attachment (Weight 10kg) takes 1 poly pipe
Note- Max digging depth assumes linkage can be lowered to the ground
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN "LITTLE RIPPA" SINGLE TYNE RIPPER UP TO 35HP - GALVANIZED- ADJ LEG - 85005DC

3.02m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3605 - 3.25m (10ft 8in) 2/12 Tine, 2/16 Tine - 74kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1700kg
No of bearings: 8
No of axles: 4
Cutting width: 2.3m (7ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 24 INCH 6MM SCALLOP DISCS - 0860, SUIT 75-165HP

Medium duty rotary hoe suitable for tractors up to 120hp.
Specifications:
Actual Width: 307cm
Working Width: 285cm
Required HP: 90-120hp
Weight: 800kg
No of Blades: 66
Features:
Rated up to 120hp
PTO 540rpm 4 speed gearbox (155-180 models)
PTO 1000rpm 2 speed gearbox (205-305 models)
Swinging lower links
Gear side drive
80x7mm L blades
6 blades per flange
250mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike rotor (30x30x170mm spikes) c/w 2 piece adjustable tailgate (180-305 only)
Anti-pan (straight blade) rotor c/w 2 piece adjustable tailgate (180-305 only)
Roller Options:
Cage Roller (385mm diameter)
Ergon 155 = 860kg with roller
Ergon 180 = 880kg with roller
Ergon 205 = 920kg with roller
Cage Roller (440mm diameter)
Ergon 230 = 980kg with roller
Ergon 255 = 1050kg with roller
Ergon 280 = 1110kg with roller
Ergon 305 = 1180kg with roller
Packer Roller (420mm diameter)
Ergon 155 = 920kg with roller
Ergon 180 = 1000kg with roller
Ergon 205 = 1080kg with roller
Packer Roller (470mm diameter)
Ergon 230 = 1160kg with roller
Ergon 255 = 1240kg with roller
Ergon 280 = 1300kg with roller
Ergon 305 = 1380kg with roller
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models
ERGON120-155 160cm Working width 60-120hp 600kg 36 Blades
ERGON120-180 185cm Working width 70-120hp 650kg 42 Blades
ERGON120-205 210cm Working width 75-120hp 690kg 48 Blades
ERGON120-230 235cm Working width 80-120hp 733kg 54 Blades
ERGON120-255 260cm Working width 85-120hp 770kg 60 Blades
ERGON120-280 285cm Working width 90-120hp 800kg 66 Blades
ERGON120-305 310cm Working width 100-120hp 880kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.85M (90-120HP) ERGON ROTARY HOE

3.70m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3707 - 3.70m (12ft 2in) 4/15 Tine, 1/20 Tine - 83kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.70M, 5 RANK DEEP SECTIONS & STD DRAWBAR-LIGHT DUTY-COMPLETE SET

Features:
- 150 x 100 x 8mm chassis
- 200 x 120 x 8mm gang beams
- 28 (710mm) scalloped discs on this CVH-71 model (8mm thick)
- Disc scrapers
- 10 (260mm) disc spacing
- Eight double taper roller bearings with a 5 year warranty
- Reinforced bearing protectors
- Manual gang angle adjustment from 8 - 24 degrees
- Manual fore/aft adjustment with spring
- 40mm square silicon manganese steel disc axles
- 400 / 60 x 15.5 flotation tyres
- Swivel hitch
Super heavy offset discs for demanding agricultural and cropping applications. High quality French manufactured with a 5 year bearing warranty.
Working Width = 3,500 mm
Overall Width = 3,750 mm
Required HP Range = 180 - 240 hp
Weight = 2,930 kg
Number of Discs = 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GB 3.5M, 28 DISCS (180-240HP) HEAVY DUTY OFFSET DISCS

Rotavator Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROTAVATOR BLADE CURVED (LH) 60 X 6MM

Find Tillage AND Seeding For Sale. Browse 980 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

DAKEN CAT II SINGLE SHANK SUB SOIL RIPPER (MAX 110HP)

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 6MM SCALLOP DISCS - 0862, SUIT 75-165HP

MURRAY 1.72M SERIES 44 STUMP JUMP HARROW INCL DRAWBAR (1.72M-5.16M)

BREVIGLIERI 237-440CM INTER ROW TILLER (40-80HP)

CELLI 2.85M (110-140HP) PIONEER ROTARY HOES

DAKEN "LITTLE RIPPA" SINGLE TYNE RIPPER UP TO 35HP - GALVANIZED- ADJ LEG - 85005DC

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 24 INCH 6MM SCALLOP DISCS - 0860, SUIT 75-165HP

CELLI 2.85M (90-120HP) ERGON ROTARY HOE

MURRAY SERIES 03 LEVELLING HARROW 3.70M, 5 RANK DEEP SECTIONS & STD DRAWBAR-LIGHT DUTY-COMPLETE SET

GB 3.5M, 28 DISCS (180-240HP) HEAVY DUTY OFFSET DISCS

SPAREX ROTAVATOR BLADE CURVED (LH) 60 X 6MM

Farm Supplies Machinery & Equipment

Dealer Address