Farm Supplies Machinery & Equipment

The Deep Tillage plough is designed for shattering compact ground with minimal disturbance to the sub soil.
Ideal for ripping hard ground prior to cultivation and for aerating pastures, therefore increasing water absorption & improving the profile of the soil.
Can be used to renovate pastures or for bed renovation. Broad acre application and row cropping. High tensile cast shank assembly with 24 underframe clearance with 1 shear pin protection.
Replaceable points and shin guards, also available with tungsten tips.
Optional crumbler rollers also available to help create a level surface and reduce crusting in the surface.
Optional coulters available to reduce surface disturbance in pasture (must be ordered with machine).
Specifications:
Heavy duty 100 x 100 x 9mm tine mounting frame.
High tensile cast shank assembly with 24in (610mm) underframe clearance with 1in shear pin protection. Replaceable points and shin guards also available with tungsten tips.
Breakout force approx. 4000 ft. / lbs.
Tine spacing set at 12in (300mm).
Approx 15HP required per tine.
Adjustable pair of Holden wheel for depth control available as an option.
Optional coulters available to reduce surface disturbance in pasture.
Available in 2, 3, 5, 7, 9 or 11 tine models with other sizes made on request. 2 and 3 tine models are fitted on a single row frame. Trailing units also available.
Options:
0327 14in Coulters (must be ordered with machine) priced per coulter unit.
0355 Optional Hydraulic Phasing Cylinders to replace ratchets.
0200 Depth Wheels (Pair Holden) optional normally mounted outside frame.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS DEEP TILLAGE PLOUGHS 2 TINE - 0321, MIN 30HP

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1700kg
No of bearings: 8
No of axles: 4
Cutting width: 2.3m (7ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 26 INCH 6MM SCALLOP DISCS - 0870, SUIT 75-165HP

5.58m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3514 - 5.58m (18ft 4in)(28 Row) 6/16 Tine - 108kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Murray 2.90m, Series 04 Diamond Harrow 3PL hoist lift type system with Series 21 Hoist Frame.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not diamond harrows. Picture is for example only.
4030 - 3 sections - 2.90m.
Complete Set Comprises:
Front Lift Drawbar
Harrow sections
Rear Lift Drawbar
and Series 21 3 Point Linkage Hoist Frame.
Suitable for open country and lighter loamy soils, Murray Diamond Harrows are an effective implement used for weed control and final seedbed preparation.
Specialising in shattering soil crusts allowing improved aeration and moisture penetration, it will give your crops every chance of reliable germination and subsequent vigour.
The Diamond frame design is constructed using flat bar material providing the Harrow with strength and rigidity. It features replaceable bolt-in 16mm square section High Carbon Steel tapered tines with a working depth between 50 to 80mm (2 to 3).
Murray Diamond Harrows are supplied in sets complete with drawbars, ranging from 2 sections 2.03m (68) to 10 sections 10.16m (334). Lift type sets using our 3 Point Linkage Hoist Frame (Series 21) are available, making transportation of your Harrows easy and convenient. The complete set is comprised of a Front Lift Drawbar, Harrow Sections, Rear Lift Drawbar and 3 Point Linkage Hoist Frame (Series 21).
Features:
- 2 Point Pull (2PP). Replaceable bolt-in 16mm square section High Carbon Steel tapered tines.
- Manufactured from flat bar material
Specifications:
- 30 kg (66lb).
- Coverage 0.97M (38").
- Tine Spacing 51mm (2").
- Tine Length 152mm (6") approx
- Centre to centre of Front Hooks 508mm (20").
- 5 Rank / 20 Tines.
- Tapered Tines with working depth between 50-80mm (2" - 3")
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.90M 3PL HOIST LIFT DIAMOND HARROW SYSTEM 3 SECTIONS WITH SERIES 21 HOIST FRAME

Murray Series 32 16 Disc Harrow - Offset Tandem 1.83m.
The Murray Series 32 Disc Harrow is an excellent choice for soil preparation and breaking up virgin land. Built heavy duty, the tandem disc setup combines rugged capabilities with smart features.
The durable box frame is built in two parts, with a pivot point that is able to be locked providing different working configurations. It supports four gangs of discs two front and two rear. Gang angles can be individually adjusted by way of crank screws to suit different conditions. The angle can be adjusted between 0 and 20 degrees to vary the aggression of cultivation. Disc gangs are mounted on sealed-for-life bearings set in rubber. No greasing is required which minimises unproductive maintenance downtime.
In a standard form the Series 32 is a four gang Disc Harrow for use with light to medium powered tractors. By removing the rear frame section and gangs, the Series 32 becomes a handy two-gang implement for light work. Alternatively, the rear frame section and gangs can be pivoted upwards to provide additional weight for penetration by the leading two gangs in heavier conditions. Under uneven ground conditions, the rear frame section and gangs can be allowed to float over undulations for even cultivation.
The Murray Series 32 Disc Harrow is a three-point linkage mounted implement suitable for Cat II hitches. It is supplied complete with fittings and fasteners including linkage pins and clips. Available in two popular sizes 16 discs covering around 1.83 metres (6ft) and a 20 disc model covering 2.28 metres (7ft 6in) approx.
Under certain conditions Disc Harrows can throw up a furrow between the inner discs. The option of a centre spring tine is available which will maintain a level finished behind the harrow in these situations. Optional sets of blade scrapers are also available to keep discs clean and working efficiently in wet or sticky conditions.
Features:
- Available in 16 Disc or 20 Disc models
- Suitable for Cat II systems
- Adjustable gangs from 0 20 degrees
- Sealed for life bearings
- 559mm (22 inch) scalloped discs
- Removable/ pivot rear frame section
Specifications:
- Coverage (m): 1.83
- Coverage (ftin): 6
- Power Requirement: 35 to 55 hp
- Standard Discs: 22 Scalloped Flatback Discs
- Weight (kg): 520
Optional Equipment:
- Scraper set: 16 Disc- 43kg
- Scraper set: 20 Disc - 54kg
- Spring Tooth Centre Tine assembly (1)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

Series 38 Manual winch rigid frame with 2 section rigid S44 Broadacre Stump Jump Harrow. 1.72m. Transport width: 1.79m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.72M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

Note: This model is the Crumbler (only).  S Tine Cultivators are available at additional costs.

JOHN BERENDS 2.4M CRUMBLER (ONLY) - TO SUIT BERENDS S-TINE CULTIVATOR

3 Point Linkage Compact Disc Harrows 1.5m 18 inch Discs - 100-3-01
100 Series Cat 1
18in discs with 7 and 1/2in disc spacing
16 Discs in total
2in square tube frame
35 horse power range
1in square high carbon gang axles
1.5m working width
230kg
Sealed, self-aligning ball bearings
Front gang adjust to 0, 7, 14, 21 degrees with adjustment handle
Rear gang adjust to 7, 14, 21 degrees with adjustment handle
Models:
100-3-01 Red Powder Coat
100-3-03 Green Powder Coat
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP COMPACT DISC HARROWS 1.5M - 18 INCH DISCS, SUIT 15+HP

Series 23 - 2.1m Small Acreage Pasture Harrow.
Designed to be operated via UTV, 4WD or ride on Mower.
Specifications:
- One sided tripod sections
- Available in 0.76m (26) depth
- High Carbon 10mm Square Steel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.1M SMALL ACREAGE PASTURE HARROW - SERIES 23

Features:
120 HP multi speed gearbox with rear PTO (540 RPM).
2080mm working width.
48 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Model Code: B123V-205
Connection Type: Linkage
Min Tractor PTO HP: 60-120 HP
Working Width (mm): 2080
Working Depth (mm): 100-250
Product Weight (kg): 700
Total Width (mm): 2270
Specifications with Optional Cage Roller
Product Weight (kg): 860
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 2.08M B123 ROTARY HOE (MIN 60-120HP)

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

The Deep Tillage plough is designed for shattering compact ground with minimal disturbance to the sub soil. Ideal for ripping hard ground prior to cultivation and for aerating pastures, therefore increasing water absorption.

JOHN BERENDS DEEP TILLAGE PLOUGHS 11 TINE - 0326, MIN 165HPHP

Find Tillage AND Seeding For Sale. Browse 984 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS DEEP TILLAGE PLOUGHS 2 TINE - 0321, MIN 30HP

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 26 INCH 6MM SCALLOP DISCS - 0870, SUIT 75-165HP

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

MURRAY 2.90M 3PL HOIST LIFT DIAMOND HARROW SYSTEM 3 SECTIONS WITH SERIES 21 HOIST FRAME

MURRAY 1.83M 16 DISC HARROW - OFFSET TANDEM

MURRAY 1.72M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

JOHN BERENDS 2.4M CRUMBLER (ONLY) - TO SUIT BERENDS S-TINE CULTIVATOR

FIELDQUIP COMPACT DISC HARROWS 1.5M - 18 INCH DISCS, SUIT 15+HP

MURRAY 2.1M SMALL ACREAGE PASTURE HARROW - SERIES 23

BREVIGLIERI 2.08M B123 ROTARY HOE (MIN 60-120HP)

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 32HP

JOHN BERENDS DEEP TILLAGE PLOUGHS 11 TINE - 0326, MIN 165HPHP

Farm Supplies Machinery & Equipment

Dealer Address