Farm Supplies Machinery & Equipment

To Suit Telehandler. 

XL Square Bale Forks 1240mm

BURDER TELEHANDLER XL SQUARE BALE FORKS (4 CONUS II TINES) - 1240MM

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

High Lift Option for Standard Bucket 6000 series - 1.65m.
Requires front remote. (add to appropriate GP Bucket)

Specifications:

- Width (m): 1.65m 	
- HP Range: 40-60	
- Struck Capacity (m3): 0.27
- Rated Capacity (m3): 0.34
- Dimensions LxWxH (mm): 1710X690X560
- Weight (kg): 145

BURDER HIGH LIFT OPTION FOR STANDARD BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

40mm / 137mm Hammer Flail.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HAMMER FLAIL - 40MM TOP WIDTH, 137MM BOTTOM WIDTH - REPLACEMENT FOR BERTI, BREVIGLIERI, MASCHIO, VOGEL, NOOT

Includes 1 x "M" back to back blade (inside).
"M" 3 Back to Back Flail Suits the Following Muthing Models (with optional Rotor Incorporating 3 Back to Back Flails):
MU-ECOTOP
MU-H
MU-L
MU-M
MU-MAXI
Options for this blade:
MU000557 2 x "M" Back to Back Blades (outside)
MU980416 Bolt with Nut to suit "M" 3 Back to Back Flail
MU000559 Muthing Spacer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 1X MUTHING "M" INSIDE BLADE (ONLY) - FOR 3 BACK TO BACK FLAIL

Top Grabs for Standard Bucket 8000 series - 1.80m.
Price is for grabs only does not include bucket.

Two Grab types available:
Profile Cut Grabs:

The top grab for bucket is an additional feature that makes picking objects off the ground easier. 

Activating the hydraulic cylinder for the grab will result in a grabbing action.

Forges Tines Grabs: 

The tines on the top grab can be easily removed if replacement tines are needed. With the added grab with tines, transporting loose silage is much easier.

Specifications:

- Width (m): 1.80m 	
- HP Range: 50-100
- Struck Capacity (m3): 0.47	
- Rated Capacity (m3): 0.56
- Dimensions LxWxH (mm):
- Weight (kg): 225

BURDER TOP GRAB FOR BUCKET STANDARD 8000 SERIES 1.80M - 50-100 HP RANGE

130mm / 40mm Y Type Flail.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX Y TYPE FLAIL - 130MM LENGTH, 40MM WIDTH - REPLACEMENT FOR KVERNELAND, MALETTI

Loader Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE - STRAIGHT, 660MM LENGTH (SQUARE)

Galvanised ACS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Features:
- 300cm cutting width
- Italian manufactured high ratio gearbox (100HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- LH & RH discharge chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM GALVANISED 300CM SIDE DISCHARGE ROTARY SLASHER (100HP) - ACS-STS SERIES

Southern Cross 3.6ft Slasher - 16-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 2.5mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 45HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Wheel kits not available for this model
Specifications:
- Recommended Tractor (HP) - 16-45
- Cutting Width (mm) - 1058
- Overall Width (mm) - 1208
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm (Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 58
- Deck Thickness (mm) - 2.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-Co Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 197kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 3.6FT SLASHER (16-45HP)

Bigfoot Trencher 600-900mm dig - 100mm Diggatac (Tungsten carbide) chain with crumber bar. - 1 5/8 inch chain - front mounted.
Suits 1.5 tonne to 4.5 tonne machines.
Tractor requires Hydrostatic / Vario Transmission.
Price inclusions: 600 to 900mm dig trencher, chain, standard frame, 2.2m hoses & couplers.
A compact yet powerful trencher fitted with a quality Digga Planetary Drive & Eaton Hydraulic Motor, 3 position-adjustable skid foot and single spoil removal auger.
Unique design gives the operator consistent digging depth, efficient spoil removal and finely crumbled spoil for effective compaction back into the trench whilst providing minimal ground disturbance to surrounding conditions and a cleaner job finish.
Ideal Use:
Pipe laying for irrigation, underground power and
communications, road repairs and general construction.
Multi-purpose combination chain:
Get the best from both worlds with a multipurpose chain configuration.
Diggatac for hard ground conditions:
100% Diggatac Carbine Tooth
The DIGGATAC tungsten carbide chain configuration provides extended tooth life and reduced vibration, particularly when starting in tough conditions such as rocky hard shale, asphalt or frozen ground.
Best used in hard or frozen ground conditions and asphalt.
Chain sizes available:
- 100mm
- 150mm
- 200mm
Features:
- Head Start Crumber System (patent pending) - start trenching with the crumber in the down position saving time by not having to get out of the machine
- Highly visible foot can be seen from the cab. No spotter required
- Adjustable skid foot features 3 preset digging depths
- Up to 900mm digging depth and 200mm digging width
- 3 different chain options - Earth, Combo, and Diggatac
- Compact, yet powerful Australian Made planetary drive
- Frame can be side shifted to dig close to permanent structures
Specifications:
- Cutting Width: 100mm
- Foot Depth Presets: 600 / 750 / 900 mm
- Hydraulic Flow: 50-95 lpm
- Motor Size: 2K Bell EATON
- Max Pressure - Do not exceed 240 bar @ 60 lpm
- Max Flow - Do not exceed 95 lpm @ 200 bar
- Max Continuous Power 25 Kw (34 hp)
- Length: 1920 mm
- Horizontal Height: 668 mm
- Width: 1212 mm
- Weight - With a 150mm Combo Chain 261 kg
See photos for more information and specifications.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA BIGFOOT TRENCHER 900MM DIG - 100MM TUNGSTEN CARBIDE (DIGGATAC) CHAIN WITH CRUMBER BAR

200MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 200MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Find Machinery Attachments For Sale. Browse 1374 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

BURDER TELEHANDLER XL SQUARE BALE FORKS (4 CONUS II TINES) - 1240MM

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

BURDER HIGH LIFT OPTION FOR STANDARD BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

SPAREX HAMMER FLAIL - 40MM TOP WIDTH, 137MM BOTTOM WIDTH - REPLACEMENT FOR BERTI, BREVIGLIERI, MASCHIO, VOGEL, NOOT

SOUTHERN CROSS AG MACHINERY 1X MUTHING "M" INSIDE BLADE (ONLY) - FOR 3 BACK TO BACK FLAIL

BURDER TOP GRAB FOR BUCKET STANDARD 8000 SERIES 1.80M - 50-100 HP RANGE

SPAREX Y TYPE FLAIL - 130MM LENGTH, 40MM WIDTH - REPLACEMENT FOR KVERNELAND, MALETTI

SHW LOADER TINE - STRAIGHT, 660MM LENGTH (SQUARE)

AGRIFARM GALVANISED 300CM SIDE DISCHARGE ROTARY SLASHER (100HP) - ACS-STS SERIES

SOUTHERN CROSS AG MACHINERY 3.6FT SLASHER (16-45HP)

DIGGA BIGFOOT TRENCHER 900MM DIG - 100MM TUNGSTEN CARBIDE (DIGGATAC) CHAIN WITH CRUMBER BAR

DIGGA 200MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Farm Supplies Machinery & Equipment

Dealer Address