Farm Supplies Machinery & Equipment

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush.
It is ideal for the clearance of arable stubble, maize and rapeseed crops.
Strenx 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing.
The undersole discs are produced from Hardox 450, a wear and abrasion resistant steel.
An optional side shift unit is available which allows the operator.
Features:
Can be front or rear mounted (to be specified when ordering)
Patented blender double chop blade system
25 percent less power and fuel consumption required than a similar sized flail machine Impact shock reducing swinging hardened spring steel blades
Low maintenance machine with less wearing parts than a flail mower
Heavy duty rear roller
Model:
MJ30-200 2.0m (6ft 5in) 600kg 50-100HP 3 Rotors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - TWIN ROTOR - GEAR DRIVE - SUIT 50-100HP

An implement for the small to mid range tractors which is easy to use but with the strength and reliability to match Australian conditions.
Features:
Hydraulic angle (3x12 ram) allows mouldboard to be angled at up to 45 deg in each direction from the tractor seat. Blade can also be reversed for back filling.
Can be manually offset in seconds to work outside the tractor wheel to the left or right hand side. Maximum of 600mm offset.
Tilt position can be controlled either via a ratchet or optional hydraulics (2 ram model). Allows approximately 30 deg tilt in both directions. Additional holes for the lower linkage arms provide extra tilt for extreme V-draining.
Diverter kits are available to allow 2 ram model to be used on tractors with a single set of remotes.
Heavy duty hardened reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting width: 6ft (1.8m)
Mouldboard thickness: 8mm
Mouldboard height: 450mm
Tractor HP: 30-60
No Offset Positions: 4
Weight: 240kg
Also available:
0415 6ft MD Hydraulic Grader Blade 2 ram (hydraulic angle/tilt)
Options:
0411 Grader Blade Wheel Kit
0419 Boxed ends suit Medium Duty model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) 1 RAM HYDRAULIC ANGLE - 0414, SUIT 30-60HP

Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SKID - 336MM LENGTH, 330MM WIDTH - REPLACEMENT FOR CLAAS, KUHN, JOHN DEERE

Mower Blade.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE TAPERED - 129 X 50 X 4MM (RH & LH) - REPLACEMENT FOR KUHN, JOHN DEERE

Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE TWISTED - 98 X 48 X 4MM (RH) - REPLACEMENT FOR FELLA

Loader Tine Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE NUT - M33

10ft (3m) Pasture Toppers with 75HP centre gearbox & 45HP outside boxes

The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 160 REAR & SIDE MULTI PURPOSE FLAIL MOWER

600mm TP series Tree Planting Auger (soft earth) up to 5T for Ramdrill PHD - Hydraulic Drive.
Price inclusions: Tree Auger, pilot, pin and clip.
TP - Tree planter
Designed to drill a smaller diameter hole for the tap root and a larger secondary hole at the top for the root ball.
The design of the Tree Planter cutting system will leave the hole walls rough and not glazed, meaning the plant stock has the maximum chance of establishing.
The angle and geometry of the teeth to the pilot
is the key to the efficiency in which these augers
perform.
Available for drilling in earth (TS tooth
style), providing longer wear life and greater
cutting performance. Not suited for rock.
Features:
- Designed to easily dig and place trees and shrubs of all sizes
- Cutting system designed to prevent root binding
- Improves plant establishment
- Adaptors & extensions to maximise drilling depth
- Robust Auger body construction for long life
- Heavy duty tu7be with highest grade steel
- Replaceable wearparts
- Quality Australian made
Specifications:
- Drilling Conditions: soft earth
- Standard Hub: 50.8mm Round
- Hub Options: 50.8mm Hex, 65mm Round, 57mm Square
- Overall Length: 1200 mm
- Flights (Lead): 6 mm
- Flights (Carry): 6 mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: PDD-PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay:45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N/A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM TREE PLANTING AUGER FOR RAMDRILL - HYDRAULIC DRIVE

200mm - 1 Series Auger for Post Hole Borer.
Standard conditions - Tungsten Carbide.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl One man Style 25mm Round
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 200MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR 1 MAN BORER

400mm TP series Tree Planting Auger (soft earth) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Tree Auger, pilot, pin and clip.
TP - Tree planter
Designed to drill a smaller diameter hole for the tap root and a larger secondary hole at the top for the root ball.
The design of the Tree Planter cutting system will leave the hole walls rough and not glazed, meaning the plant stock has the maximum chance of establishing.
The angle and geometry of the teeth to the pilot
is the key to the efficiency in which these augers
perform.
Available for drilling in earth (TS tooth
style), providing longer wear life and greater
cutting performance. Not suited for rock.
Features:
- Designed to easily dig and place trees and shrubs of all sizes
- Cutting system designed to prevent root binding
- Improves plant establishment
- Adaptors & extensions to maximise drilling depth
- Robust Auger body construction for long life
- Heavy duty tu7be with highest grade steel
- Replaceable wear parts
- Quality Australian made
Specifications:
- Drilling Conditions: soft earth
- Standard Hub: 50.8mm Round
- Hub Options: 50.8mm Hex, 65mm Round, 57mm Square
- Overall Length: 1200 mm
- Flights (Lead): 6 mm
- Flights (Carry): 6 mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: PDD-PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay:45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N/A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM TREE PLANTING AUGER FOR RAMDRILL - HYDRAULIC DRIVE

Inner Tube specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX INNER TUBE - 2.5 / 3 - 4MM, TR87 ANGLED VALVE, SUITABLE FOR AIR

Find Machinery Attachments For Sale. Browse 1377 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

MAJOR 2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - TWIN ROTOR - GEAR DRIVE - SUIT 50-100HP

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) 1 RAM HYDRAULIC ANGLE - 0414, SUIT 30-60HP

SPAREX SKID - 336MM LENGTH, 330MM WIDTH - REPLACEMENT FOR CLAAS, KUHN, JOHN DEERE

SPAREX MOWER BLADE TAPERED - 129 X 50 X 4MM (RH & LH) - REPLACEMENT FOR KUHN, JOHN DEERE

RASSPE RADURA MOWER BLADE TWISTED - 98 X 48 X 4MM (RH) - REPLACEMENT FOR FELLA

SHW LOADER TINE NUT - M33

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

MUTHING MU-H/S 160 REAR & SIDE MULTI PURPOSE FLAIL MOWER

DIGGA 600MM TREE PLANTING AUGER FOR RAMDRILL - HYDRAULIC DRIVE

DIGGA 200MM AUGER (STANDARD - TUNGSTEN CARBIDE) FOR 1 MAN BORER

DIGGA 400MM TREE PLANTING AUGER FOR RAMDRILL - HYDRAULIC DRIVE

SPAREX INNER TUBE - 2.5 / 3 - 4MM, TR87 ANGLED VALVE, SUITABLE FOR AIR

Farm Supplies Machinery & Equipment

Dealer Address