Farm Supplies Machinery & Equipment

Southern Cross 3.6ft Slasher - 16-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 2.5mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 45HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Wheel kits not available for this model
Specifications:
- Recommended Tractor (HP) - 16-45
- Cutting Width (mm) - 1058
- Overall Width (mm) - 1208
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm (Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 58
- Deck Thickness (mm) - 2.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-Co Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 197kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 3.6FT SLASHER (16-45HP)

Galvanised AHS/150 Slasher. A heavy duty slasher for general farm pasture and small sucker regrowth slashing.
Features:
- 150cm/60 ins cut width
- 75 HP gearbox.
- 6 series drive shaft with friction clutch.
- 5mm plate body with Z formed front and rear apron -for maximum strength.
- Laminated Bisalloy blade beam with offset suction lift blades.
- Adjustable side skirts.
- Clevis hitch 3 point linkage.
- Optional extras.
Optional extras:
- Chain top link
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
- Single height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 150CM ROTARY SLASHER (75HP) - AHS SERIES

450mm RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PTO - Hydraulic downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 450MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL PTO -HYDRAULIC DOWNFORCE

Loader Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE - STRAIGHT, 1,000MM LENGTH (SQUARE)

The Nobili mulcher TRP 95, 120, 145, 175 are provided with pick-up is a mounted machine that fits on the three-point linkage of the rear hydraulic lift of the tractor.
Through the pick-up device the machine picks up the pruning remains, lifting and carrying them inside the mulching chamber where they are cut and then put down on the ground through calibrated holes of the frame.
In working position it is supported by steering wheels or by the roller.
The 8 rows rotor, provided with hammers, ensures a more regular rotation, less vibrations, low power requirement and high working speeds in every condition. The double output gearbox with built in overrunning clutch ensures sturdiness and reliability.
The mulcher has been constructed in compliance with EC Regulations.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 90-120, KW: 66-88
Cast Hammer Blade: 24
Working Width: 1730mm
Overall Width: 1991mm
Weight: 1075kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller
- Front wheels
- Reversible model (TRP175 only)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.7M TRP MULCHER (SUIT 90-150HP)

Large Profile Buckets (high volume/light materials).

BURDER LARGE PROFILE BUCKET (9900 SERIES) 2.7M - (150+ HP)

Jarrett Redback Series Slasher 2.1m -150hp
- Gearbox, centre - RHS tower
- 6mm body and 6mm front and rear apron.
- 6mm x 250 deep skids, double gusset
- 3 blade disc base
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 2200
Cutting width (mm) - 2100
Gearbox hp/(kw)- 150
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 17,300(88)
Options:
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 150HP - RB7-130

Pipe Layer Attachment. Ideally the ripper should be run through the ground prior to pipe laying to ensure there are no obstacles and the required depth can be maintained. The pipe layer is easy to put on and take off the ripper for this reason. The pipe is usually rolled out next to the hole either over the tractor or with a second operator feeding it from the side
Pipelayer takes 70mm Poly Pipe.
Farm Aid pipe layers are entirely Australian products. Designed and manufactured by our team here in Coopers Plains from Australian Materials.
Features:
Bolt on pipe layer suits all single tine rippers
Suits Standard & Heavy Duty Ripper
Farm-Aid pipe layer also suits Berends single tine rippers.
Pipelayer takes 70mm Poly Pipe.
Additional information
Weight 40 kg
Dimensions 124 × 83 × 31 cm
Models:
FA100 (70mm OD pipe) (Suits Farm-Aid Standard FA105 and Heavy Duty Ripper FA106)
No corners have been cut in their construction. They are built to serve and built to last.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID PIPE LAYER - FA100

1.2m Silage Grab (7 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (this model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.2M SILAGE GRAB

Rata 1.2m Log Fork. Made in New Zealand.
Log forks are a heavy duty attachment for handling logs, posts and building poles. They are standard with a roll back safety frame and fabricated high strength forks. The Single hydraulic grab model has the ability to clamp on a post end for simple post removal.
The Rata Post and Log Forks are a multi-task attachments built to perform any job on your Tractor front end loader, Telehandler or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes your fencing or tree clean-up work easy.
Being manufactured from high tensile steel makes it the strongest Post and Log grab of its type available on the Australian & New Zealand market.
Width 1.2m
Fork Length 1.2m
Weight 100kg
Capacity 2,000kg
Minimum HP 80hp required
Hydraulic Grab x1 included
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.2M LOG FORK (SINGLE HYDRAULIC)

No corners have been cut in their construction. They are built to serve and built to last.
75 x 50 x 6mm RHS Main frame.
Heavy Duty Linkage.
Round, seamless steel tubes, 14in diameter x 1/4in wall thickness.
Can be filled with water for additional weight.
FA454 10ft Lawn Roller (approx. 330kg empty or 570kg filled)
FA455 Optional drawbar can be made to order
Trailed Models can be made to order
Ideal for general farm use or specifically for turf farms, race clubs, ovals etc.
Farm Aid lawn rollers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID LAWN ROLLERS - 10FT - FARM AID - FA454

The TBE Series mulchers are heavy duty offset machines with parallelogram arm ideal for council and contractor use in maintaining roadsides, parks and gardens. The TBE has a double skin and rounded Hardox steel skids for increased durability. Height control is maintained by a roller with removable ends for servicing.
For grass and green prunings up to 50mm diameter. Low profile body, double skin & no opening tailboard. PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Hydraulic swing arm offset with spring loaded break away. 65 degrees below horizontal to 90 degrees vertical Inclination adjustment.
Cat. II three point linkage floating top link
Specifications:
Height Control: Roller (standard fitment).
Connection Type: Linkage
Min PTO HP: 100-170 HP
PTO rpm: 540
Rotor rpm: 2205
Hammers: 26
Working Width (mm): 2400
Product Weight (kg): 1030
Dimensions WxDxH (MM): 2572 x 768 x 1222
Options:
Y Blades: 52
Y Blades with Straight: 52Y with 26S
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI TBE OFFSET MULCHERS 2.4M - TBE242/06 - 100-170HP

Find Machinery Attachments For Sale. Browse 1322 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

SOUTHERN CROSS AG MACHINERY 3.6FT SLASHER (16-45HP)

AGRIFARM GALVANISED 150CM ROTARY SLASHER (75HP) - AHS SERIES

DIGGA 450MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL PTO -HYDRAULIC DOWNFORCE

SHW LOADER TINE - STRAIGHT, 1,000MM LENGTH (SQUARE)

NOBILI 1.7M TRP MULCHER (SUIT 90-150HP)

BURDER LARGE PROFILE BUCKET (9900 SERIES) 2.7M - (150+ HP)

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 150HP - RB7-130

FARM-AID PIPE LAYER - FA100

RATA 1.2M SILAGE GRAB

RATA 1.2M LOG FORK (SINGLE HYDRAULIC)

FARM-AID LAWN ROLLERS - 10FT - FARM AID - FA454

NOBILI TBE OFFSET MULCHERS 2.4M - TBE242/06 - 100-170HP

Farm Supplies Machinery & Equipment

Dealer Address