Farm Supplies Machinery & Equipment

This heavy duty professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive bleed for displaced roller towards the back, starting from model 2016.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 220 MULCHER (SUITS 45-120HP) - FRONT OR REAR MOUNT

The Major Trailed Topper is a fully offset gear driven machine.
It is offset for working and is folded into transport position hydraulically from the tractor seat.
The rotors are timed with each other and have an overlap of 3 inches (75mm). The blades rotate in opposite directions to each other and spread the cut grass evenly behind the machine. As the machine is fully offset there is no trampling of the pasture prior to cutting.
The cutting height is set at the desired level by moving the adjustable side skids to the appropriate position. There is a limit stop on the ram which controls the rear axle.
Features:
Full hydraulic offset control
Hydraulic breakaway system
Wide angle PTO shaft
Twin-cut ProCut swinging blades
Model:
MJ45-360 3.6m (12ft) 1,240 kg 40-120HP 3 Rotors 50-205mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR TRAILED OFFSET TOPPER SERIES - 3.6M - 12FTGDW-HD, 40-120HP

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 140 MULCHER (35-90HP) FRONT OR REAR MOUNT

Galvanised Agrifarm ACS Slasher includes wheels. Extra heavy duty slasher for contractors, local government bodies and farm clearing work.
Features:
- 210cm cutting width
- Italian Manufactured High Ration Gearboxes (125HP)
- 8 series drive shaft with 4 plate friction clutch.
- High ratio gearbox produces optimum blade tip speed.
- Heavily reinforced 5mm body, galvanizing option.
- Swing back blades
- 300mm underbody clearance to handle the heaviest crop.
- Floating headstock slasher follows ground profile.
- Laminated Bisalloy blade beam offset suction lift blades.
- Front & rear chain curtains standard
- Cat 1 & 2 Clevis Hitch 3PL
- Fixed Skid = Twin Wheels Standard (210,240,300,360)
Optional Extras:
- Chain guards front or rear
- Support stand Complete
- Support stand Mtg tube only
- Council rear sign holder
- Council knapsack holder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 210CM ROTARY SLASHER (125HP) - ACS SERIES

The Minos Agri CZ-M Chisel Plough is available with 5, 7, 9 or 11 tines and are mounted to tractors by three point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines.
The main functions of these chisel type ploughs are breaking hard bottom soil which formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damage. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle.
Comes with roller.
Models
CZ-5-M 5 Tine 125cm Working Width 60-70hp required Power 400kg
CZ-7-M 7 Tine 175cm Working Width 75-80hp Required Power 550kg
CZ-9-M 9 Tine 225cm Working Width 85-90hp Required Power 630kg
CZ-11-M 11 Tine 275cm Working Width 90-100hp Required Power 770kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI 7 TINE CHISEL PLOUGH WITH ROLLER 1.75M - CZ-7-M. 75-80HP

The Minos Agri DTM Multidisc tiller and rotary harrow combination does not spoil the levelling of the soil because each disc works independently in working conditions. Shreds the soil more effectively than the disc harrow.
Working speed is generally 10-12km/h and the cage roller can be adjusted with a hydraulic cylinder. Carrying roller weight is also taken on the equipment to minimise the load applied to the arms of the tractor. Folding Rollers on small models. Large models fold for transport.
Specifications
Diameter of Discs 510mm
DTM-14 14 Discs 1.8m Working Width 890kg 80-90HP Required Power
DTM-16 16 Discs 2.0m Working Width 960kg 80-90HP Required Power
DTM-18 18 Discs 2.2m Working Width 990kg 80-100HP Required Power
DTM-20 20 Discs 2.5m Working Width 1280kg 80-100HP Required Power
DTM-24 24 Discs 3.0m Working Width 1350kg 80-110HP Required Power
DTM-28 28 Discs 3.5m Working Width 1460kg 90-120HP Required Power
DTM-32 32 Discs 4.0m Working Width 1740kg 110-140HP Required Power
DTM-40 40 Discs 5.0m Working Width 1970kg 160-180HP Required Power
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MINOS AGRI DTM MULTIDISC TILLER AND ROTARY HARROW COMBINATION - MINOS AGRI - DTM-28. 90-120HP

Jarrett Redback Series Slasher 2.1m -130hp
- Lo-speed gearbox, centre/offset.
- 6mm body and 6mm front and rear apron.
- 6mm x 250 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 2200
Cutting width (mm) - 2100
Total weight (kg) -680
Gearbox hp/(kw)- 130/(97)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 17,300(88)
Options:
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 130HP - RB7-130

NVHL XHD Series blade hydraulic model. - 3.0m.
The heavy-duty design and construction of the NVHL Series make them ideal for the most rugged grading jobs. The 8, 9 and 10-foot moldboards are reinforced to withstand the most demanding conditions and can be reversed for backfilling.
This top-of-the-line blade is rated for use on tractors up to 160 (2WD) horsepower and features optional hydraulic controls for precision blade adjustment.
The NVHL Series is ready for heavy duty action and gives you the confidence to tackle the toughest jobs.
360° Total swing angle. The 1/2 x 6 grader-type steel cutting edge is reversible, featuring bevels on both edges for twice the work life, and replaceable for even greater functionality.
Ditching and terracing jobs can be accomplished quickly and easily with optional hydraulic tilt adjustment.
Perfect filling. Optional skid shoes protect the moldboard cutting edge from hitting low-lying obstructions while cleaning corrals or removing snow.
Parking Stand Included.
Options available at an extra cost:
- Dual wheel upgrade
- Single wheel upgrade
- Hydraulic depth wheel upgrade ( add single wheel where requires)
- 12 V diverter kit.
- Optional end plates hold in extra material while dragging it from one place to another.
- Optional skid shoes protect the moldboard cutting edge from hitting low-lying obstructions while cleaning corrals or removing snow.
Specifications:
- Swing Angle: 43°L/R
- Tilt Adjustment: 12°U/D
- Offset Adjustment: 91cm L/R
- Tail Wheel: single, manual adjustment
- Hose kits to rear remotes: 3 circuits
- Mounts: Cat II- Cat III, 3 PL
- HP Range: 160 (2WD) 145 (4WD)
- Cutting Edge: ½inch x 6 inch reversible interchangeable
- Weight: 726 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BISON 3.0M NVHL SERIES GRADER BLADE, SUIT UP TO 160HP (2WD)

The Nobili TLP mulchers are suited to low horsepower tractors up to 30HP for grass with cutting height maintained by the rear roller.
Features:
Suggested Use: Grass mowing only.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock.
Attachment: Cat. I and II three point linkage.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
HP: 15-50
Y Blades Standard
Working Width (mm): 1200
Weight (KG): 155
Dimensions WxHxD (mm): 1350W 460H 760D
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI TLP PASTURE MULCHERS 1.2M - TLP120/06, SUIT UP TO 30HP TRACTOR

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 180cm cutting width
- Italian manufactured high ratio gearbox (54HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS180STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

MUTHING MU-H VARIO 200 MULCHER (35-90HP) - FRONT OR REAR

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

MUTHING MU-L VARIO 220 MULCHER (SUITS 45-120HP) - FRONT OR REAR MOUNT

MAJOR TRAILED OFFSET TOPPER SERIES - 3.6M - 12FTGDW-HD, 40-120HP

MUTHING MU-H VARIO 140 MULCHER (35-90HP) FRONT OR REAR MOUNT

AGRIFARM GALVANISED 210CM ROTARY SLASHER (125HP) - ACS SERIES

MINOS AGRI 7 TINE CHISEL PLOUGH WITH ROLLER 1.75M - CZ-7-M. 75-80HP

MINOS AGRI DTM MULTIDISC TILLER AND ROTARY HARROW COMBINATION - MINOS AGRI - DTM-28. 90-120HP

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 130HP - RB7-130

BISON 3.0M NVHL SERIES GRADER BLADE, SUIT UP TO 160HP (2WD)

NOBILI TLP PASTURE MULCHERS 1.2M - TLP120/06, SUIT UP TO 30HP TRACTOR

AGRIFARM PAINTED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

MUTHING MU-H VARIO 200 MULCHER (35-90HP) - FRONT OR REAR

Farm Supplies Machinery & Equipment

Dealer Address