Farm Supplies Machinery & Equipment

Banana AHM Mulcher - 195cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Banana farmers have 4 sizes to chose from; AHM160-B, 195-B, 240-B & 285-B.
Features:
- European Gearbox (60HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- 1000 PTO kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM BANANA MULCHER AHM SERIES - 195CM (60+HP REQ)- AHM/195-B

Suitable for ROPS and CAB (optional).

Titan products like Burder products are made with the same principles in mind. The products are built to be tough, efficient and suits even the most budget conscious.

BURDER 1.5M TITAN FRONT END LOADER (24-45HP)

Burders under axle and over axle blade operates similarly with the exception of the over axle blade having more ground clearance. The blades are suited for heavy duty work and there are several blade options to choose from.

BURDER 1.8M (6FT) 720 MODEL STRAIGHT OVER AXLE BLADE

The Nobili BE Series is best suited to medium horsepower tractors up to 65HP with the option of front or rear tractor mount and cutting height maintained by the rear roller (including reversible cab tractors).
Suggested Use: Grass mowing and green pruning's up to 40mm in diameter.
Construction: Low profile body, no opening tailboard.
Control: Two position fixed headstock or optional hydraulic side shift.
Driveline: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive (drive from both ends) and electronically balanced rotor.
Attachment: Cat. I three point linkage (BE14, BE16), Cat I/II three point linkage (BE18, BE20). Floating top link included.
Height Control: Roller standard.
Model Working Width Tractor HP Weight
BE14/06 1400mm 35 - 65 HP 335 kg
BE16/06 1600mm 39 - 65 HP 370 kg
BE18/06 1800mm 42 - 65 HP 410 kg
BE20/06 2000mm 44 - 65 HP 450 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.6M BE MULCHER (UP TO 65HP) FRONT OR REAR MOUNT

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 210cm cutting width
- Italian manufactured high ratio gearbox (70HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS210STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

Suitable for ROPS (only).
The Burder loader series are built to be tough, agile and performs well even under extensive usage.
The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.
Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max: 8.3x16
Volume: 0.12m³
Tractor HP: 15-24
Bucket Width: 1.2m
Rated Capacity (std Bkt): 280kg
A. Lift Height to Pin: 1800mm
B. Dump Height: 1400mm
C. Dig Depth: 110mm
D. Crowd Angle: 40°
E. Dump Angle: 45°
FEL Weight Incl Std Bucket: 170kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Choice of Euro or Burder Hitch at no Extra Cost
Deluxe Quick Detach Loader
Heavy Duty Gravel Bucket
Full Mesh Grille Guard
Vesconite Wear Bushes at all Pivot Points
Adjustable Level Indicator
Plated Greasable Pins
2 Pack Epoxy Paint
Choice of Colour for Loader Arms
24 Month Limited Warranty
* Burder 8000, 9000 and 10000 Series have Soft Ride as Standard
* Burder 9050 and above have 3rd Function as Standard

Options:
2 circuit remote (ROPS)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port)
3rd bank & Front Remotes 6, 8, & 9000 ROPS
3rd bank & Front Remotes 3000 ROPS
Detent per Spool
Front Remotes to plug into Tractor Remotes
Multi Doc-Front Remotes Male & Female
Multi Doc-Front Remotes Male Only
6 Port Hydraulic Quick Coupler
Hydraulic Dampeners Electric Upgrade
Eco-pro Joystick Upgrade
Hydraulic Quick Change (Upgrade Optional) - Requires 3rd function to operate (Additional cost)
4th Function
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 2040 XP2 - 1.2M BURDER FRONT END LOADER (15-24 HP)

Mulchers with a broad range of potential uses, ideal for the shredding of pruning residues, vine-cuttings, plant remains, bushes, grass.
Also ideal for the upkeep of roadsides, the maintaining of non-seeded areas, pastures and hunting grounds.
The VKM 210, 240, 280 and 305 series is equipped with mechanical or hydraulic axial side shift and wheels (or roller) with removable bottoms placed behind the rotor, to prevent the flattening of the chopped product.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 70-130, KW: 51-96
Cast Hammer Blade: 22
Working Width: 2094mm
Weight: 870kg
Features:
Suggested Use: Grass and green pruning's to 90mm diameter.
Construction: Medium profile body and one mulching bars.
Control: Hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced 8 row rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller with removable ends (standard fitment).
Options:
- Left hand offset
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.1M VKM MULCHER (SUIT 70-130HP)

The GH-5004 Aervator is a high utility farm implement that relieves compaction, aerates, cultivates and renovates. It can function as a rotary hoe, a disc, a roller and a harrow and increases the effectiveness of water and fertiliser.
Product Features
Aerate, Renovate & Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate & Renovate 2.50 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate & Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate & Renovate 7.50 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Equipment Options
Trailing kits for all models
Hard facing tine option
Hydraulic folding wings
Removable concrete weights
Turf tines
Larger models available up to 12m
Aeration requires multiple uses of the aervator to achieve results.
Depending on your soil structure, this could take 12-24 months.
The ideal time to use is autumn and spring depending on your rainfall.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

The Minos Agri CZ-M Chisel Plough is available with 5, 7, 9 or 11 tines and are mounted to tractors by three point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines.
The main functions of these chisel type ploughs are breaking hard bottom soil which formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damage. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle.
Comes with roller.
Models
CZ-5-M 5 Tine 125cm Working Width 60-70hp required Power 400kg
CZ-7-M 7 Tine 175cm Working Width 75-80hp Required Power 550kg
CZ-9-M 9 Tine 225cm Working Width 85-90hp Required Power 630kg
CZ-11-M 11 Tine 275cm Working Width 90-100hp Required Power 770kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI 7 TINE CHISEL PLOUGH WITH ROLLER 1.75M - CZ-7-M. 75-80HP

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 160 MULCHER (35-90HP) FRONT OR REAR

Heavy duty hydraulic side shift mulcher, for tractors from 60-90hp. Ideal for mowing grass and mulching pruning's up to 70mm in diameter (Vineyards and Orchards etc).
Specifications:
Actual Width: 193cm
Working Width: 175cm
Required HP: 60-90hp
Weight: 585kg
No of Blades: 16
Features:
90hp Rated gearbox
Integrated over-run clutch
2 Internal counter combs
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
Hydraulic side shift
540rpm PTO
Front protection flaps
Flat hammer flails
Parking support
Options In lieu of standard:
Rear collection spikes (each) (150 = 11, 175 = 13, 200 = 15, 225 = 17, 250 = 19)
Opening rear door
Set of steering wheels in lieu of roller
Manual offset by threaded bar (in lieu of hydraulic)
Y flails in lieu of hammer flails
Models:
MIZAR/S150 150cm Working Width 50-90hp 530kg 14 Blades
MIZAR/S175 175cm Working Width 60-90hp 585kg 16 Blades
MIZAR/S200 200cm Working Width 65-90hp 635kg 18 Blades
MIZAR/S225 225cm Working Width 70-90hp 685kg 20 Blades
MIZAR/S250 250cm Working Width 75-90hp 735kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (90HP GEARBOX) MIZAR/S LOW BODY MULCHER

Silage fork HD Profile cut tines - 3000mm.
Specifications:
Width: 3000mm
Weight: 740kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER SILAGE FORK HD PROFILE - 3000MM

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 873 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

AGRIFARM BANANA MULCHER AHM SERIES - 195CM (60+HP REQ)- AHM/195-B

BURDER 1.5M TITAN FRONT END LOADER (24-45HP)

BURDER 1.8M (6FT) 720 MODEL STRAIGHT OVER AXLE BLADE

NOBILI 1.6M BE MULCHER (UP TO 65HP) FRONT OR REAR MOUNT

AGRIFARM PAINTED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

BURDER 2040 XP2 - 1.2M BURDER FRONT END LOADER (15-24 HP)

NOBILI 2.1M VKM MULCHER (SUIT 70-130HP)

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

MINOS AGRI 7 TINE CHISEL PLOUGH WITH ROLLER 1.75M - CZ-7-M. 75-80HP

MUTHING MU-H VARIO 160 MULCHER (35-90HP) FRONT OR REAR

CELLI 1.75M (90HP GEARBOX) MIZAR/S LOW BODY MULCHER

BURDER TELEHANDLER SILAGE FORK HD PROFILE - 3000MM

Farm Supplies Machinery & Equipment

Dealer Address