Farm Supplies Machinery & Equipment

Heavy duty slashers designed for tough conditions.
Features:
- Fitted with solid rubber tyres. Puncture proofing is available.
- Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
- Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
- Front and rear chains can be fitted on request.
- Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 3.5m
Weight 975kg
Width (overall) 3.72m
Body construction: 5mm top, 6mm sides
Tractor HP range 70HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540rpm
Centre Gearbox 110HP
End Gearboxes 75HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

Light duty power harrow for tractors up to 80 / 100hp. Suitable for small agricultural applications.
Specifications:
Actual Width: 205cm
Working Width: 200cm
Required HP: 50-80hp
Weight: Cage roller - 610kg, Packer roller - 690kg
No of Blades: 16
Features:
Rated up to 80hp
319 rotor speed
540 rpm
Category one linkage / two linkage
Rear levelling bar with winder height adjustment
Manual depth control
260 x 90 x 10mm tines
260mm working depth
45 degree sliding side plates
Shearbolt safety on Driveshaft
Greasable top bearings
Accessories:
Four speed gearbox (rated to 100hp)
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
GO200 200cm Working Width 50-80HP 16 Tines
GO225 225cm Working Width 60-80HP 18 Tines
GO250 250cm Working Width 65-80HP 20 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2M (50-80 HP) GO POWER HARROW

Extra heavy duty hydraulic side-shift mulcher, for tractors from 80-140 hp. Suitable for mowing grass and mulching prunings and wood up to 150mm in diameter.
Features:
- 140 hp rated gearbox
- 2400 RPM rotor speed
- 30cm high intake
- Integrated over-run clutch
- High clearance intake (30cm)
- Hydraulic side shift (60cm)
- Fixed upper and rear counter blades
- Double skinned chassis
- 220mm diameter adjustable rear roller for cutting height
- Side skids
- 5 belt side transmission with automatic belt tensioner
- 540 rpm PTO
- Front protection chains
- Flat hammer flails (1.4kg)
- 20mm flail bolt
- 8 + 8mm chassis
Overall Width = 2,680 mm
Cutting Width - 2,400 mm
Hammers = 20
HP Required = 90 - 120hp
Weight = 1,040 kg
Options Available:
Y Flails, in Lieu of Hammer Blades
Self Steering Rear Wheels, in Lieu of rear roller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.4M (90-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

Suitable for raking and turning spreading hay crops, silage and grain crop stubble. Used as a V or Inline rake.
Construction: Simple robust construction requiring minimal maintenance.
Drive Line: Ground drive.
Fold: Hydraulic fold.
Suspension: Adjustable spring suspension.
Control: Single set hydraulics via tractor remote.
Attachment: Cat. II clevis to tractor drawbar.
Specifications:
Type: Carted V with splitter wheel
Working Width (m): 5.5
Product Weight (kg): 760
Number of rake wheels (L/R-Kicker): 4/4 +1
Tynes Per Wheel: 40
Rake wheel diameter: 1400mm
Transport width: 2.6m
Options:
Hydraulic Opening Kit
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SITREX QR TRAILED HAYRAKES - 4L/4R+1 RAKE WHEELS - SITREX - HR-QR8HR QR8

2.4m Silage Grab (13 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.4M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

Heavy duty rotary hoes intended for large farms, specialised operations and contractors. They are designed to work in heavy conditions with a wide choice of accessories.
The versatility allows better tillage results on many ground types.
Features:
170 HP multi speed gearbox with rear PTO (1000 RPM).
2800mm working width.
66 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
Rear door with spring and pin adjustment.
1 3/8in 21 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Product Code: B170V-280
Min Tractor PTO HP: 90-170 HP
Working Width (mm): 2800
Working Depth (mm): 100-200
Product Weight (kg): 1080
Total Width (mm): 3000
Weight with Optional Cage Roller:
Product Weight (kg): 1200
Weight with Optional Packer Roller:
Product Weight (KG): 1360
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Double Flange
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 2.8M B170 ROTARY HOE (MIN 90-170HP)

Linkage air assist Oktopus 1,000 litre sprayer with a 93 L/min diaphragm pump, 10 outlets (five per side) for targeted spraying and electric valve controls. Ideal for vineyards and berries. Note: images shown are of the Oktopus 2000L.
Specifications:
Market: Horticulture, Viticulture
Tank Size (L): 1,000
Connection Type: Trailed
Min PTO HP: 50
Pump Size (L/min): 93
Height / Width / Length (mm): 2500 / 1540 / 2860
Product Weight (kg): 350 (dry)
Application: Vineyards and Berries.
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms, corrosion resistant, cast anodised aluminium body. IDS121: 93L/min. capacity, 5000kPa pressure
Fan size: 450mm diameter turbine fan, 10 fishtail outlets.
Nozzles: Flip-over type for dilute/concentrate spraying with ceramic hollow cone nozzles and 10 nozzles (5 per side) twist on/off.
Gearbox: Two speed with neutral position, oil-bath type.
Control: 40 bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, non-spill lid. 80L flush tank and 15L hand wash tank fitted to 1,000L unit. 40L fresh water tank fitted to 2,000L unit.
Frame: 1,000L: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: 1,000L & 2,000L: Pump bypass plus venturi agitator
Pressure Gauge: 63mm, 0-60 bar glycerine filled gauge (500L unit)
Filtration: Lid strainer and suction line strainer
Trailed Wheel Equipment: 1,000L: 50mm axle with 15" tubeless tyres on painted rims
PTO Driveshaft: Quality driveshaft with quick release pins and safety cover
HP Required: 50PTO HP
Options:
- Bravo 180S automatic rate controller (D99-143)
- Narrow Oktopus fan (D99-82)
- Flotation tyres - 400/60 x 15.5" with fixed axle (in lieu of standard singles) (D99-80)
- Quick turning hitch (2000L only) (D99-170)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1,000L TRAILED OKTOPUS SPRAYER - MIN 50PTO HP

300L APV Seeder for Power Harrows
To suit Breviglieri MF80 and MF100 power harrows. See the MF80 and MF100 Power Harrows for the units these attach to.
Features:
- Working width: 1-6 metres with double electric fan, 8 outlets.
- Hopper capacity: 300L
- 12 Volt in cab controller with hectare meter.
- Fine and coarse seed sowing shafts.
- 8 Dispersion plates.
Dimensions:
Height = 110 cm
Width = 80 cm
Depth = 100 cm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 300L ELECTRIC APV AIR SEEDER

The ideal road grading blade for 100HP tractors.
Features:
Hydraulic angle using the famous Berends patented swivel turntable system.
Hydraulic tilt adjustment.
Hydraulic Offset
Over 6m in length.
Weight approximately 2000kg with provision for water ballast to be added.
Optional linkage hitch available.
Main beam 250 x 250 x 12.5mm rhs.
10mm mouldboard with 500mm clearance with correct curvature for road grading.
Fitted with reversible hardened cutting edge.
Wheelkit consists of 4 Landcruiser wheels with hydraulic lift.
Also Available:
0427 12ft trailing Grader with hyd angle, tilt, wheellift & No Offset (fixed)
Options:
0426 Optional Offset ram and hoses
0429 Optional Angle Ram Relief Valve
0420 Boxed ends suit all HD, EHD and Hydraulic model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GRADER BLADE TRAILING MODEL (INC OFFSET) 12FT (3.6M) - 0428

Multiple interrow tillers manufactured by Breviglieri are mechanical PTO-driven machines designed for soil cultivation between rows of plants which have already reached a certain height (sunflower, maize, tobacco, cotton, beet, vegetables and flowers in general) and for nurseries.
The interrow tillers mechanically shred, scarify and aerate the surface layers of the soil, improving its natural fertility and virtually eliminating the need for herbicides and pesticides.
They also enable fertiliser use to be drastically reduced, resulting in considerably more abundant crop growth in a clean, eco-friendly environment and therefore greatly improved production yield per hectare.
These machines consist of a one-piece frame and a series of independent cutting elements, which can be adjusted based on the different types of row crop or nursery requirements. They can also be fitted with different accessories such as a fertiliser spreader and a folding frame for road transport.
5 types of MG4 models: Please note the price listed is for model MG4 220.
- MG4 220: 40-50HP, 220cm working width, 160kg
- MG4 280: 40-50HP, 280cm working width, 179kg
- MG4 360: 40-60HP, 360cm working width, 199kg
- MG4 440: 50-80HP, 440cm working width, 219kg
- MG4 310-P (Manual Folding): 50-80HP, 310cm working width, 250kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 237-440CM INTER ROW TILLER (40-80HP)

Heavy duty fixed mulcher, for tractors from 60-90hp. Ideal for mowing grass and mulching pruning's up to 70mm in diameter (Vineyards and Orchards etc).
Specifications:
Actual Width: 193cm
Working Width: 175cm
Required HP: 60-90hp
Weight: 515kg
No of Blades: 16
Features:
90hp Rated gearbox
Integrated over-run clutch
2 Internal counter combs
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
2 position headstock for offset or centre mount operation
540rpm PTO
Front protection flaps
Flat hammer flails
Parking support
Options In Lieu of Standard:
Rear collection spikes (each) (150 = 11, 175 = 13, 200 = 15, 225 = 17, 250 = 19)
Opening rear door
Set of steering wheels in lieu of roller
Y flails in lieu of hammer flails
Models:
MIZAR/F 150 150cm Working Width 50-90hp 490kg 14 Blades
MIZAR/F 175 175cm Working Width 60-90hp 515kg 16 Blades
MIZAR/F 200 200cm Working Width 65-90hp 600kg 18 Blades
MIZAR/F 225 225cm Working Width 70-90hp 650kg 20 Blades
MIZAR/F 250 250cm Working Width 75-90hp 700kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (90HP GEARBOX) MIZAR/F LOW BODY MULCHER

Description
RZ Range RLC Leaf Spring Rippers 3m R9-3
Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available. This is the Fixed Frame version.
Specifications
Working Width: 300cm
Required HP: 125-200hp
Rippers: 9
Fixed Frame.
Features
Double clamp bolt-on legs.
Adjustable leaf spring.
Heavy duty 100x100mm box section.
Adjustable rubber depth wheels.
865kg breakout.
Reversible chisel point.
Solid steel legs.
Options
Rear rollers.
Rubber depth wheels (2×600-9)
Wing share.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (9 RIPPERS)

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 881 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

CELLI 2M (50-80 HP) GO POWER HARROW

CELLI 2.4M (90-120HP) JUPITER EXTRA HEAVY DUTY SIDE-SHIFT MULCHER

SITREX QR TRAILED HAYRAKES - 4L/4R+1 RAKE WHEELS - SITREX - HR-QR8HR QR8

RATA 2.4M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

BREVIGLIERI 2.8M B170 ROTARY HOE (MIN 90-170HP)

SILVAN 1,000L TRAILED OKTOPUS SPRAYER - MIN 50PTO HP

SILVAN 300L ELECTRIC APV AIR SEEDER

JOHN BERENDS GRADER BLADE TRAILING MODEL (INC OFFSET) 12FT (3.6M) - 0428

BREVIGLIERI 237-440CM INTER ROW TILLER (40-80HP)

CELLI 1.75M (90HP GEARBOX) MIZAR/F LOW BODY MULCHER

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (9 RIPPERS)

Farm Supplies Machinery & Equipment

Dealer Address