Farm Supplies Machinery & Equipment

15,00L Cone Bottom Tank on Stand.
Specifications:
Total height: 3970mm
Inlet height: 3770mm
Diameter: 2500mm
Features:
15 degrees cone bottom and full drain bung for total evacuation of contents
Ribbed sidewall tanks for superior strength
Self supporting roof with no internal fixtures or supports
2" complete draining Banjo fitting installed on all tanks (Optional 3" available)
3 Positive tie down points / lifting lugs
Heavy duty galvanised steel frame (Complete stainless steel stands available on request)
Supplied in translucent green colour so level of contents can be seen (Also available in black)
450mm hinged & vented lid
Rated for 1.5SG liquids
Stand also available with forklift slippers for safe and easy lifting when empty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 15,000L CONE BOTTOM TANK ON STAND

This heavy duty professional range for tractors of up to 220hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QST/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 RPM.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patented removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 320 MULCHER INC HYDRAULIC SIDE SHIFT

Pineapple AHM Mulcher - 160cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Macadamia mulchers have 3 sizes, AHM160-M, 195-M & 240-M.
Features:
- European Gearbox (50HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- Centrally mounted .
- 55mm taper lock rotor support bearings.
- Rear height roller
- Mulching bar
- Hydraulic angling rear deflectors
- Deflection both LH & RH
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MACADAMIA MULCHER AHM SERIES - 160CM (50+HP REQ) - AHM/160-M

Painted Agrifarm ACS Slasher includes wheels. Extra heavy duty slasher for contractors, local government bodies and farm clearing work.
Note: Picture shows galvanised model.
Features:
- 210cm cutting width
- Italian Manufactured High Ration Gearboxes (125HP)
- 8 series drive shaft with 4 plate friction clutch.
- High ratio gearbox produces optimum blade tip speed.
- Heavily reinforced 5mm body, galvanizing option.
- Swing back blades
- 300mm underbody clearance to handle the heaviest crop.
- Floating headstock slasher follows ground profile.
- Laminated Bisalloy blade beam offset suction lift blades.
- Front & rear chain curtains standard
- Cat 1 & 2 Clevis Hitch 3PL
- Fixed Skid = Twin Wheels Standard (210,240,300,360)
Optional Extras:
- Slasher galvanised (4WACS210-G)
- Chain guards front or rear
- Support stand Complete
- Support stand Mtg tube only
- Council rear sign holder
- Council knapsack holder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 210CM ROTARY SLASHER (125HP) - ACS SERIES

Agrifarm ASM Mulcher Hydraulic Side Shift Roller
200cm
Universal low clearance mulcher suitable for roadside grass maintenance, orchard and vineyard pruning's.
Features:
- European Gearbox (50HP)
- SPBX Section American V Belts
- Cat 1 Clevis Hitch 3PL
- Can be front or rear mounted on the tractor.
- Hydraulic side shift standard.
- Can be built LH or RH offset.
- 6 series European drive shaft with integral clutch
- Roller or castor wheels standard.
- 4 X SPBX section belt rotor drive on large diameter pulleys for optimum blade speed.
- Hammers fitted standard, Y flail option.
- 4mm thick plate monocoque body construction.
- Chain top link.
Options:
- rear rubber flap
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER ASM HYDRAULIC SIDE SHIFT ROLLER 200CM (50HP) - ASM/200R

Specifications:
Beta DTM-20 Multi Disc Harrow
22'' / 560mm Scalloped Discs
Number of discs: 20
Working depth with 560 mm discs (mm) : up to 150
Working depth with 610 mm discs (mm): Up to 200
Working width (mm): 2700 mm
Overall width (mm): 2900
Overall length in operation (mm) :2840
Transit-mode length (mm): 2060
Overall height in operation (mm): 1510
Transit-mode height (mm): 2280
Weight with cage roller (kg): 1520
Weight with double cage roller (kg): 1660
Required tractor power (HP): 78-85
Beta utilizes its clever design and systematically arranged components, farmers can harness a higher working capacity while saving time and fuel costs. It is an excellent choice for seedbed preparation and stubble processing.
The main platform is built using a select choice of high-quality thick steel plates. Another noticeable aspect is that the brush tines are suspended on solid HSS steel for added strength and effectiveness against stubborn weeds and clumped-up soil. Its main contraption is its two rows of opposite facing disc harrows that very aggressive work front which ensures optimal flow of soil and/or residue in every work condition. The discs are mounted on independent suspensions and are spaced by 30 cm to increase efficiency and operating performance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MINOS AGRI BETA DTM-20 SPRING MOUNTED DISC ARM - 2.7M (MIN 78HP)

Galvanised AHS/210 Slasher. A heavy duty slasher for general farm pasture and small sucker regrowth slashing.
Features:
- 210cm/83 ins cut width
- 100HP gearbox.
- 6 series drive shaft with friction clutch.
- 5mm plate body with Z formed front and rear apron -for maximum strength.
- Laminated Bisalloy blade beam with offset suction lift blades.
- Adjustable side skirts.
- Clevis hitch 3 point linkage.
Optional extras:
- Chain top link
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
- Single height wheel
- Twin height wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 210CM ROTARY SLASHER (100HP) - AHS SERIES

Galvanised Agrifarm ACS Slasher includes wheels. Extra heavy duty slasher for contractors, local government bodies and farm clearing work.
Features:
- 240cm cutting width
- 8 series drive shaft with 4 plate friction clutch.
- High ratio gearbox produces optimum blade tip speed (125HP)
- Heavily reinforced 5mm body, galvanizing option.
- Swing back blades
- 300mm underbody clearance to handle the heaviest crop.
- Floating headstock slasher follows ground profile.
- Laminated Bisalloy blade beam offset suction lift blades.
- Front & rear chain curtains standard
- Cat 1 & 2 Clevis Hitch 3PL
- Fixed Skid = Twin Wheels Standard (210,240,300,360)
Optional Extras:
- Chain guards front or rear
- Council rear sign holder
- Council knapsack holder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM GALVANISED 300CM ROTARY SLASHER (125HP) - ACS SERIES

The Minos Agri CZ-M Chisel Plough is available with 5, 7, 9 or 11 tines and are mounted to tractors by three point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines.
The main functions of these chisel type ploughs are breaking hard bottom soil which formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damage. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle.
Comes with roller.
Models
CZ-5-M 5 Tine 125cm Working Width 60-70hp required Power 400kg
CZ-7-M 7 Tine 175cm Working Width 75-80hp Required Power 550kg
CZ-9-M 9 Tine 225cm Working Width 85-90hp Required Power 630kg
CZ-11-M 11 Tine 275cm Working Width 90-100hp Required Power 770kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI 9 TINE CHISEL PLOUGH WITH ROLLER 2.25M CZ-9-M. 85-90HP

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 210cm cutting width
- Italian manufactured high ratio gearbox (70HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS210STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

Front or Rear Mounting for Tractors up to 90HP
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 220 MULCHER FRONT OR REAR MOUNTING

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

RAPID PLAS 15,000L CONE BOTTOM TANK ON STAND

MUTHING MU-PRO 320 MULCHER INC HYDRAULIC SIDE SHIFT

AGRIFARM MACADAMIA MULCHER AHM SERIES - 160CM (50+HP REQ) - AHM/160-M

AGRIFARM PAINTED 210CM ROTARY SLASHER (125HP) - ACS SERIES

AGRIFARM MULCHER ASM HYDRAULIC SIDE SHIFT ROLLER 200CM (50HP) - ASM/200R

MINOS AGRI BETA DTM-20 SPRING MOUNTED DISC ARM - 2.7M (MIN 78HP)

AGRIFARM GALVANISED 210CM ROTARY SLASHER (100HP) - AHS SERIES

AGRIFARM GALVANISED 300CM ROTARY SLASHER (125HP) - ACS SERIES

MINOS AGRI 9 TINE CHISEL PLOUGH WITH ROLLER 2.25M CZ-9-M. 85-90HP

AGRIFARM PAINTED 210CM SIDE DISCHARGE ROTARY SLASHER (70HP) - ACS-STS SERIES

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

MUTHING MU-O 220 MULCHER FRONT OR REAR MOUNTING

Farm Supplies Machinery & Equipment

Dealer Address