Farm Supplies Machinery & Equipment

Multi purpose reversible side-shift mulcher, for tractors from 60-100hp. Suitable for mowing grass and mulching pruning's and woods up to 80mm diameter.
Specifications:
Actual Width: 236cm
Working Width: 220cm
Required HP: 60-100hp
Weight: 760kg
No of Blades: 20
Features:
100hp Rated gearbox with rear PTO
Double hitch (front and rear) 3-point linkage (cat2)
Integrated over-run clutch
Hydraulic side shift
Fixed front counter blades
replaceable upper counter blades
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 belt side transmission
Hydraulic side shift
540rpm PTO
Front protection chains
Flat hammer flails
Options In Lieu of Standard:
Set of 2 front steel wheels
Y flails in lieu of hammer flails
Models:
GEMINI/SR220 220cm Working width 60-100hp 760kg 20 Blades
GEMINI/SR250 250cm Working width 70-100hp 845kg 22 Blades
GEMINI/SR300 300cm Working width 90-100hp 980kg 28 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.2M (60-100HP) GEMINI REVERSIBLE MULCHER

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

Kurrajong 1000 Deluxe Turf Spreader - 990 Litres - Holds 1 tonne of Super
This deluxe model includes the adjustable discharge spout & gate assembly plus the Super Turf Tyres & Galvanised Frame.
Overall Dimensions (approx):
- Hopper Capacity: 990 litres
- Height: 1.405 m
- Length: 2.740 m
- Width (including tyres): 2.045 m
- Weight: 365 kg
- Hopper Opening (Straight): 1.360 m
- Hopper Opening (Diagonal): 1.920 m
Standard Inclusions:
* Stainless steel hopper
* Galvanised frame
* Galvanised spinner
* Super Turf Tyres
* Adjustable stainless steel discharge spout & gate assembly
* Jockey wheel
* New radial tyres
* PTO (not on hydraulic models)
* Starter Pack (including grease tube & caulking gun)
* Operator manual & quantity charts
* 12 months warranty on structural components
* Suppliers warranties on commercial components

Optional Models
- 1310L Big Volume Hopper - Holds 1 bulker bag or Urea. (Kurrajong 1000 Standard - KS1000BV)
- 1310L Big Volume Hopper - With adjustable discharge spout & gate assembly. Holds 1 Bulker bag of Urea. (Kurrajong 1000 Deluxe - KSD1000BV)
Optional Extras:
* Agitator & safety screen
* Lump breaker & safety screen
* Quantity booster
* Galvanised frame
* Stainless steel discharge spout
* Electric gate opener (must include s/steel discharge spout)
* Heavy duty tyres
* Road tow kit
* Tarp & bow
* Hydraulic option (no PTO)

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

CRUMP 990L DELUXE TURF SPREADER

Burders under axle and over axle blade operates similarly with the exception of the over axle blade having more ground clearance.
The blades are suited for heavy duty work and there are several blade options to choose from.
Specifications:
Model: 780
Blade Width: 2.7m
HP Range: 150-200 (price will be higher if blades are 200HP plus)
Options:
Hyd Angle (push off to either side)
Hyd Tilt (camber on road)
Hyd Forward Tilt
Wings
Depth Skids
Mesh Guards
Flip Down Root Rack
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 2.7M (9FT) 780 MODEL STRAIGHT UNDER AXLE BLADE

Double Bale Grab Spiked to suit Telehandler.
Specifications:
- Weight: 480kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER DOUBLE BALE GRAB SPIKED

Burders under axle and over axle blade operates similarly with the exception of the over axle blade having more ground clearance.
The blades are suited for heavy duty work and there are several blade options to choose from.
Specifications:
Model: 760
Blade Width: 3m
HP Range: 100-150
Options:
Hyd Angle (push off to either side)
Hyd Tilt (camber on road)
Hyd Forward Tilt
Wings
Depth Skids
Mesh Guards
Flip Down Root Rack
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 3M (10FT) 760 MODEL STRAIGHT OVER AXLE BLADE

Multi purpose side shift mulcher, for tractors from 40-70hp.
Ideal for mowing grass, set-aside and medium size pruning's up to 50mm diameter.
Specifications:
Actual Width: 168cm
Working Width: 150cm
Required HP: 45-70hp
Weight: 475kg
No of Blades: 14
Features:
70hp Rated gearbox
Integrated over-run clutch
Fixed counter blades
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
Side shift by threaded bar (Hydraulic kit available see options)
540rpm PTO
Front protection flaps
Flat hammer flails
Options In Lieu of Standard:
Hydraulic ram kit for off set (in lieu of threaded bar)
Rear collection spikes (each) (125 = 9, 150 = 11, 175 = 13, 200 = 15)
Set of steering wheels in lieu of roller
Y flails in lieu of hammer flails
Models
VEGA/S125 125cm Working Width 40-70hp 440kg 12 Blades
VEGA/S150 150cm Working Width 45-70hp 450kg 14 Blades
VEGA/S175 175cm Working Width 50-70hp 500kg 16 Blades
VEGA/S200 200cm Working Width 60-70hp 560kg 18 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.5M (70HP GEARBOX) VEGA/S MULTI PURPOSE MULCHER

Linkage air assist Cannon Jet 500 litre sprayer with a 88 L/min diaphragm pump, Cannon Jet single-sided conveyor with hydraulic tilt adjustment, and electric valve controls.
Specifications:
Market: Horticulture
Tank Size (L): 500
Connection Type: Linkage
Min HP: 75
Pump Size (L/min): 88
Height / Width / Length (mm): 2500 / 1190 / 1400
Product Weight (kg): 140 (dry)
Application: Strawberries, flowers, greenhouse, vegetables, parks & gardens
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms, corrosion resistant, cast anodised aluminium body. APS96: 88L/min capacity, 5000kPa pressure.
Fan Size: 450mm diameter twin turbine fan with galvanised frame and spray head. Hydraulic angle adjustment and manual top wing adjustment
Nozzles: Flip-over type with ceramic hollow cone nozzles. 9 nozzles (6 in cannon head, 3 inside of cannon) with twist on/off.
Gearbox: Two speed with neutral position, oil bath type.
Controls: 40bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lid. 40 litre fresh water tank fitted to 2000L unit.
Frame: 500L: Galvanised steel, suit cat I & II linkage. 2,000L: Galvanised steel with jockey wheel and adjustable drawbar.
Agitation: 500L: dual bypass. 2,000L: pump bypass plus venturi agitator.
Pressure Gauge: 100mm, 0-60 bar glycerine filled gauge with bar increments.
Filtration: Lid strainer, suction line strainer and stainless steel nozzle filters.
PTO Driveshaft: Quality driveshaft with quick release pins and safety cover. Constant velocity shaft.
HP Required: Minimum 75hp.
Options:
- Bravo 180s automatic rate controller (D99-143)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 500L LINKAGE CANNON JET SPRAYER - MIN 75HP

Stony soil can be a major problem in the construction of parks, gardens, golf courses and any other designated green areas.
Breviglieri has engineered an efficient and functional appliance for burying stones. The robust system and oversized parts make the stone burier a dependable machine that can deal with even the toughest situations.
Stone buriers perform multiple functions in a single pass, delivering considerable agronomic and economic benefits:
- mills soil + seeds
- separates and buries soil + seeds
- levels tilled earth ready for seeding
- breaks up large clods
- facilitates drainage of the seed bed and improves water flow regulation
- reduces soil compaction
- generates significant labour savings
- speeds up soil preparation
- seeding
4 Types of SB40 Models:: Please note the price listed is for model SB40 105.
- SB40 105: 24-28HP, 105cm working width, 24L blades, 375kg
- SB40 125: 28-35HP, 125cm working width, 30L blades, 400kg
- SB40 145: 35-38HP, 145cm working width, 30L blades, 425kg
- SB40 165: 38-40HP, 165cm working width, 36L blades, 460kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 105-165CM STONE BURIER (25-40HP)

All models feature 2 x 15 ground wheels spaced 1.8m apart, 6.9mm tynes, independent raking wheels, and Hydraulic raise and lowering of raking wheels, splitter wheel kits included.
These rakes are simple to use, lightweight wheel rake, that ensures clean collection and an excellent windrow. Its wide wheelbase makes the machine stable during work and transport.
Features:
- 40hp minimum requirement
- Trailing connection
- 540 cm working width
- 8 wheels
- 40 teeth per wheel
- Tapered roller bearings
- 600kg machine weight
- Mechanical width adjustment
- Hydraulic wheel lifting
- Optional central rake wheel
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

Enorossi caddy rakes are suitable for small extensions, and are ideal for uneven terrain.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ENOROSSI 8 WHEEL TRAILED HAYRAKES - 4L/4R RAKE WHEELS

Front mounted mowers can be used in conjunction with the rear mounted roller mowers for increased mowing capacity or for single pass operation.
The Swift front mounted range offers a rigid and winged version. These mowers are suitable for mowing in a variety of locations including military bases, airfields and race courses.
There is 100 percent overview from the tractor cab making these mowers a great option where visibility is an issue.
Features:
No wheel markings
Gear driven drive line, eliminates the problems associated with belt driven mowers
Internal roller bearings give total protection against moisture and soil
Full width rear roller ease of operation and to allow the machine to follow ground contours
6 PLY tyre on the castor wheel for extra durability
Model:
MJ71-340F 3.4m (11'2") 905 kg 40-90HP 5 Rotors 10-130mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 3.4M MJ71 SWIFT SERIES FINISHING MOWERS - RIGID AND WINGED - FRONT MOUNTED (40-90HP)

Heavy duty rotary hoes intended for large farms, specialised operations and contractors. They are designed to work in heavy conditions with a wide choice of accessories.
The versatility allows better tillage results on many ground types.
Features:
170 HP multi speed gearbox with rear PTO (1000 RPM).
3040mm working width.
72 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
Rear door with spring and pin adjustment.
1 3/8in 21 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Product Code: B170V-300
Min Tractor PTO HP: 100-170 HP
Working Width (mm): 3040
Working Depth (mm): 100-200
Product Weight (kg): 1160
Total Width (mm): 3240
Weight with Optional Cage Roller:
Product Weight (kg): 1290
Weight with Optional Packer Roller:
Product Weight (kg): 1450
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Double Flange
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 3.04M B170 ROTARY HOE (MIN 100-170HP)

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

CELLI 2.2M (60-100HP) GEMINI REVERSIBLE MULCHER

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

CRUMP 990L DELUXE TURF SPREADER

BURDER 2.7M (9FT) 780 MODEL STRAIGHT UNDER AXLE BLADE

BURDER TELEHANDLER DOUBLE BALE GRAB SPIKED

BURDER 3M (10FT) 760 MODEL STRAIGHT OVER AXLE BLADE

CELLI 1.5M (70HP GEARBOX) VEGA/S MULTI PURPOSE MULCHER

SILVAN 500L LINKAGE CANNON JET SPRAYER - MIN 75HP

BREVIGLIERI 105-165CM STONE BURIER (25-40HP)

ENOROSSI 8 WHEEL TRAILED HAYRAKES - 4L/4R RAKE WHEELS

MAJOR 3.4M MJ71 SWIFT SERIES FINISHING MOWERS - RIGID AND WINGED - FRONT MOUNTED (40-90HP)

BREVIGLIERI 3.04M B170 ROTARY HOE (MIN 100-170HP)

Farm Supplies Machinery & Equipment

Dealer Address