Farm Supplies Machinery & Equipment

Series 08 - 8.63m Stump Jump Harrow System 4 Point Pull (2 Piece bars & master bar) - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8110 - 10 sections 8.63m (28ft 4in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 8.63m (28ft 4in)
- Weight 593kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 8.63M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

Trailed air assist Stiletto 2000 litre sprayer with 161L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft and a 900mm fan. Ideal for narrow vineyards and orchards. Additional model available with Bravo 180S automatic rate controller (DST23AB8G).
Specifications:
Market: Horticulture. Viticulture
Tank Size (L): 2000
Connection Type: Trailed
Min PTO HP: 60
Pump Size (L/min): 161
Height / Width / Length (mm): 1500 / 1540 / 3800
Product Weight (kg): 640 (dry)
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS1701: 161L/min. capacity 5000kPa pressure.
Fan Size: 900mm axial flow type, 10 bladed fan with curved nylon reinforced blades, air straightening vanes and protective mesh cover.
Nozzles: Flip-over type for dilute/concentrate spraying. Ceramic jets, stainless steel swirl-plates, 16 nozzles with twist on/off.
Gearbox: Oil-bath type, 2-speed with neutral position
Controls: 40 bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polutuff impact resistant polyethylene construction, calibrated sight line, easy open lid, 40mm drain valve and built-in 15L fresh water tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator
Pressure gauge: 100mm, 0-60 bar glycerine filled gauge.
Filtration: Lid strainer, suction line strainer & stainless steel nozzle filters.
Wheel Equipment: Glideflex suspension axle, 2x15" tubeless tyres on galvanised rims (max speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 60 PTO HP
Options:
- Twin nozzles (includes extra nozzles) (D99-182)
- Flotation tyres - 400/60 x 15.5" with fixed axle (in lieu of standard singles) (D99-80)
- Additional model available with Bravo 180S automatic rate controller (DST23AB8G).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L TRAILED STILETTO SPRAYER - MIN 60PTO HP

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3290kg
No. of Bearings: 12
No. of axles: 4
Cutting width: 3.43m (11ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

Made in New Zealand.
Power Claw Features:
- Good for: rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more
- Exceptional clamping force
- 16mm super high strength tines
- Made with industry leading AR450 grade steel tines!
- Opens to 1.3m between tine points
- Superior alternative to a stick rake
- Supplied with FREE storage stand
Price includes euro hitch as standard unless specified. Other hitches on request.
The exceptional clamping force and 16mm AR450 Abrasion Resistant super high strength tines make this grapple a true multi tasker. Interlocking tines ensure excellent grip & clamping force.
PC240 specs:
Weight = 530kg
HP required = 110+
Previously known as the Versatile Grapple, this Claw can be fitted to almost any loader or material handler. It must be the most useful tool you can think of because of due to the number of applications & tasks it can be used for. These include - rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.4M POWER CLAW (110+HP) EURO HITCH

The Nobili mulcher TRP 95, 120, 145, 175 are provided with pick-up is a mounted machine that fits on the three-point linkage of the rear hydraulic lift of the tractor. Through the pick-up device the machine picks up the pruning remains, lifting and carrying them inside the mulching chamber where they are cut and then put down on the ground through calibrated holes of the frame. In working position it is supported by steering wheels or by the roller.
The 8 rows rotor, provided with hammers, ensures a more regular rotation, less vibrations, low power requirement and high working speeds in every condition. The double output gearbox with built in overrunning clutch ensures sturdiness and reliability.
The mulcher has been constructed in compliance with EC Regulations.
Specifications:
Tractor Connection: Linkage (Cat II, floating top link)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 60-120, KW: 44-88
Cast Hammer Blade: 12
Working Width: 956mm
Overall Width: 1217mm
Weight: 625kg
Features:
Suggested Use: Mulcher suited to stony ground with pick up front for green pruning's to 100mm.
Construction: High profile, adjustable tailboard, two mulching bars and filter grid.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids.
Options:
- Hydraulic pickup
- Roller
- Front wheels
- Reversible model (TRP175 only)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 95CM TRP MULCHER (SUIT 60-150HP)

Nobili BKE Mulcher 2144mm
Product Code: BKE210/01-F
The Nobili rear mount BKE series of mulchers are a multi-purpose machine ideal for pasture topping with the option of side shift suited to tractors up to 100HP with cutting height maintained by adjustable skids.
Suggested Use: Grass mowing and green pruning's up to 50mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Control: Two position fixed headstock.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Skids
Specifications:
Connection Type: Linkage
Tractor HP: 65-100 HP
PTO RPM: 540
Rotor RPM: 2205
Y Blades: 48
Working Width (mm): 2144
Weight (kg): 660
Dimensions WxHxD (mm): 2360W 1222H 550D
Options:
Full Width Roller
Wear Plate
Semi Swivel Wheels
All prices include GST. Please allow extra for freight.
Contact Farm Supplies today for sales or more information!
Delivery available Australia Wide
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 2.1 METRE BKE 210, Y FLAILS, IDEAL PASTURE/PRUNINGS < 50MM (65-100HP)

Heavy duty slashers designed for tough conditions.
Features:
Fitted with solid rubber tyres. Puncture proofing is available.
Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
Front and rear chains can be fitted on request.
Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 2.9 m
Weight 875 kg
Width (overall) 3.12 m
Body construction: 5mm top, 6mm sides
Tractor HP range 60 HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540 rpm
Centre Gearbox 110 HP
End Gearboxes 75 HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3M - 0104, 60+HP

High capacity sprayer with a 12m galvanised boom and hose reel for field and spot spraying in one package.
Specifications:
Tank Size (L): 1,000
Connection Type: Linkage
Pump Size (L/min): 132
Height / Width / Length (mm): 2600 / 2200 / 2250
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and cast anodised aluminium body. BP130/20: 132 L/min. capacity 2000kPa pressure.
Boom: 12m Fieldmaster boom with stainless steel spraylines, non-drip nozzle holders, fully galvanised frame, nozzle protection, spring loaded safety break back/forward and suspension.
Nozzles: Air induction nozzles with strainer in bayonet fit non-drip nozzle holders at 50cm spacings.
Controls: 1 lever, 4 outlet control valves with pressure regulator.
Tank: Polytuff impact resistant polyethylene construction, moulded litre calibrations and non-spill screw-down lid with single breather.
Frame: Fully galvanised steel. 800L model : Cat I & II linkage 1000L model : Cat II linkage
Agitation: Bypass agitation.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer and nozzle strainers.
Hose Reel: Fitted with rear-mounted hosereel, 20m of 12mm hose and JetPro spraygun with trigger action pattern adjustment.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
- 14L foam marker (single side)
- 16L foam marker (double side)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN ECONOMAX 1000L 3PL SPRAYER INC 12M BOOM - SILVAN - KBD1000

Linkage 800 litre Casotti sprayer with 71 L/min pump and Casotti kit. Ideal for pasture spraying.
Specifications:
Market: Ag Lifestyle. Dairy & Livestock.
Tank Size (L): 800
Connection Type: Linkage
Pump Size (L/min): 71
Height / Width / Length (mm): 1315 / 1395 / 1350
Product Weight (kg): 145
Application: Pasture spraying
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body. APS71: 71L/min. capacity 5000kPa pressure.
Casotti Motor: An electric 12 volt motor is connected to the tractor battery which powers the oscillating movement of the nozzle arms. The arms swing 180º. This movement is symmetrical to the tractors passage.
Controls: 2 outlet brass manual control valve with pressure regulator. Mounted forward for easy access.
Tank: Low profile 600/800/1100L Polytuff impact resistant polyethylene construction, external sightline with floating ball and non-spill offset screw-down lid with single breather. 15L freshwater tank with screw-down lid and on/off tap. 4L toolbox with polythylene lid. 50mm Camlock bottom fill (1100L only).
Frame: Fully galvanised steel, cat II linkage.
Agitation: Bypass agitation.
Pressure Gauge: 0-60 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer with stop valve fitted at side of tank to enable ease of filter maintenance.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 800L CASOTTI LINKAGE SPRAYER

Best suited to medium horsepower tractors up to 95HP for grass and light pruning's with cutting height maintained by the rear roller.
Specifications:
Connection Type: Linkage
Tractor HP: 40-95 HP
PTO RPM: 540
Y Blades: 56
Working Width (mm): 2100
Weight (kg): 410
Height / Width / Length (mm): 420 / 2280 / 750
Features:
Suggested Use: Grass mowing and green pruning's up to 50mm in diameter.
Construction: Low profile body, no opening tailboard.
Driveline: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I three point linkage, floating top link.
Height Control: Roller (standard fitment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 2.1M BNE MULCHER (40-95HP)

Made in Canada
Suits 863 (34") - 2,260 mm (89") tyres
Features:
- Efficiently handle large tyres without physical stress, safety risks and additional personnel
- Extended reach gripper and 50° rotation
- 3-arm configuration balances the tyre perfectly
- Industry-certified and engineer-approved
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 2,032 mm
Width = 2,032 mm
Height = 1,117 mm
Teeth Length = 660 mm - reversible teeth for handling greater variety of tyres sizes
Load Capacity = 1,814 kg
Swing - Not Applicable
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO TYRE GRABBER SUITS 863MM (34") - 2260 MM (89") TYRES

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 200 MULCHER (45-120HP) FRONT OR REAR MOUNT

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 860 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

MURRAY 8.63M STUMP JUMP HARROW 4 POINT PULL (2 PCE BARS & MASTER BAR)-COMPLETE SET

SILVAN 2,000L TRAILED STILETTO SPRAYER - MIN 60PTO HP

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

RATA 2.4M POWER CLAW (110+HP) EURO HITCH

NOBILI 95CM TRP MULCHER (SUIT 60-150HP)

NOBILI 2.1 METRE BKE 210, Y FLAILS, IDEAL PASTURE/PRUNINGS < 50MM (65-100HP)

JOHN BERENDS TWIN ROTOR SLASHERS 3M - 0104, 60+HP

SILVAN ECONOMAX 1000L 3PL SPRAYER INC 12M BOOM - SILVAN - KBD1000

SILVAN 800L CASOTTI LINKAGE SPRAYER

NOBILI 2.1M BNE MULCHER (40-95HP)

HIMAC EURO TYRE GRABBER SUITS 863MM (34") - 2260 MM (89") TYRES

MUTHING MU-L VARIO 200 MULCHER (45-120HP) FRONT OR REAR MOUNT

Farm Supplies Machinery & Equipment

Dealer Address