Farm Supplies Machinery & Equipment

The Minos Agri CZ-M Chisel Plough is available with 5, 7, 9 or 11 tines and are mounted to tractors by three point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines.
The main functions of these chisel type ploughs are breaking hard bottom soil which formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damage. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle.
Comes with roller.
Models
CZ-5-M 5 Tine 125cm Working Width 60-70hp required Power 400kg
CZ-7-M 7 Tine 175cm Working Width 75-80hp Required Power 550kg
CZ-9-M 9 Tine 225cm Working Width 85-90hp Required Power 630kg
CZ-11-M 11 Tine 275cm Working Width 90-100hp Required Power 770kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI 5 TINE CHISEL PLOUGH WITH ROLLER 1.25M - CZ-5-M. 60-70HP

8.5 kVA portable generator powered by Kohler Diesel engine with Electric Start. Featuring 34 litre fuel tank, giving 13.0 hours of operation at 80% load.
Specifications:
Model Rating 0.8pf @ 50Hz: 8.5 kVA
Alternator Rating: 9.5 kVA
Engine Model: Kohler KD425
Engine Speed: 3000 rpm
Phase: 1-Phase
Engine Horsepower: 12.5 hp
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 13.0 hr
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8.5 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

Pineapple AHM Mulcher - 240cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Prunings: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Macadamia mulchers have 3 sizes, AHM160-M, 195-M & 240-M.
Features:
- European Gearbox (70HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- Centrally mounted .
- 55mm taper lock rotor support bearings.
- Rear height roller
- Mulching bar
- Hydraulic angling rear deflectors
- Deflection both LH & RH
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MACADAMIA MULCHER AHM SERIES - 240CM (70+HP) - AHM/240-M

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 140 REAR & SIDE MULTI PURPOSE FLAIL MOWER

The GH-5004 Aervator is a high utility farm implement that relieves compaction, aerates, cultivates and renovates. It can function as a rotary hoe, a disc, a roller and a harrow and increases the effectiveness of water and fertiliser.
Product Features
Aerate, Renovate & Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate & Renovate 2.50 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate & Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate & Renovate 7.50 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Equipment Options
Trailing kits for all models
Hard facing tine option
Hydraulic folding wings
Removable concrete weights
Turf tines
Larger models available up to 12m
Aeration requires multiple uses of the aervator to achieve results.
Depending on your soil structure, this could take 12-24 months.
The ideal time to use is autumn and spring depending on your rainfall.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

Galvanised AHS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Note: Picture shows painted model.
Features:
- 150cm cutting width
- 75HP gearbox
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- Clean body design eliminates grass entrapment
- 6 series European driveshaft with integral clutch
- Single adjustable height control wheel
- Rubber guards front & rear.
Optional Extras:
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 150CM SIDE DISCHARGE ROTARY SLASHER (75HP) - AHS-STS SERIES

AHM Mulcher 160CM - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
- Wheat, Maize, Sorghum, Rice and Cotton stubble. - Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
- Pruning's: Macadamia, Grapes, Banana plants & Avocados
- The Forestry model is suitable for scrub clearing, forest trails and under powerline regrowth control. These models are also fitted with a heavy duty Rotor and additional body panels
Features:
- European gearbox (50HP)
- Double skin steel body panels to withstand obstacle impact.
- Clevis hitch cat 1&2 three point linkage.
- 4 x SPBX Section belt rotor drive on large diameter pulleys for optimum blade tip speed.
- 8 series European driveshaft comes with integral clutch
- Floating top link.
- 220mm (9) diameter rotor tube with 6 row blade configuration to reduce power requirements and even out belt loadings.
- Y blades pivoting on hardened bushes
- Fully adjustable rear flap to control swath spread.
- Adjustable height skids.
Options:
- Twin height wheels
- Height roller
- Front MTG flap kit
- 1000 PTO & pulley kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AHM SERIES 160CM (50+HP REQ) - AHM/160

Professional compact tractors. Tractors up to 75hp require efficient, versatile and robust flail mulchers to carry out mowing and mulching work reliably, quickly and economically.
At the same time the equipment should be light so as not to restrict the scope of the system vehicles.
The MU-E mulcher series was created for this range of tractors. A range of options, additional equipment, low weight and strong construction are the typical attributes of this versatile range of mulchers.
Features:
Manufactured from High Quality QSt/E Steel
Headstock Cat. I + II for Rear mounting
Mountable in two positions variable by 30cm (Offset)
Gearbox with integrated over run clutch and through drive 540 RPM. or 1000 RPM
Belt protection with tension measuring slot
Stand
High tempered M Hammer flails
Smooth running Spiral rotor with specially formed lugs
Patented removable shredding bar System: Shark Fin
Roller to carry the flail, adjustable for different heights
High tempered spring steel one way protection flaps in front of the mower
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
P.T.O. shaft and Guarding to ISO Standards
Independently tested and certified for Thrown Objects.
Options:
Modification 540 to 1000 RPM (+ labour charge)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING ECOTOP 180 MULCHER (OFFSET 30CM) SUITS 30-75HP

Specifications:
Beta DTM-24
22'' / 560mm Scalloped Discs
Number of discs: 24
Working depth with 560 mm discs (mm): up to 150
Working depth with 610 mm discs (mm): Up to 200
Working width (mm): 3200
Overall width (mm): 3400
Overall length in operation (mm) :2840
Transit-mode length (mm): 2060
Overall height in operation (mm): 1510
Transit-mode height (mm): 2280
Weight with cage roller (kg): 1805
Weight with double cage roller (kg): 1960
Required tractor power (HP): 95-110
Beta utilizes its clever design and systematically arranged components, farmers can harness a higher working capacity while saving time and fuel costs. It is an excellent choice for seedbed preparation and stubble processing.
The main platform is built using a select choice of high-quality thick steel plates. Another noticeable aspect is that the brush tines are suspended on solid HSS steel for added strength and effectiveness against stubborn weeds and clumped-up soil. Its main contraption is its two rows of opposite facing disc harrows that very aggressive work front which ensures optimal flow of soil and/or residue in every work condition. The discs are mounted on independent suspensions and are spaced by 30 cm to increase efficiency and operating performance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MINOS AGRI BETA DTM-24 SPRING MOUNTED DISC ARM - 3.2M (95-110HP)

Angle & Tilt Dozer Blade - 2133mm (84 inch). Standard Bolt on frame.
Price inclusions: Dozer blade, hoses, couplers & 3m harness with 2 pin Deutch plug & bolt-on frame. Purchase electrical kits separately.
Diggas Dozer Blade is a versatile attachment for dozing, levelling ground and general earthmoving work. Fixed as well as hydro electric angle / tilt models available.
Features:
- 3 models available; angle & tilt, angle only, and fixed blade
- Large 3 centre pivot pin with hardened steel bushings
- Central pivot point maintains blade in front of the loader
- Reversible and replaceable 3/4 x 200mm bolt-on cutting edge
- Only 1 set of machine remotes required
- Australian made quality
Options available:
- Use your machines joystick to control the blade (if fitted with a service plug)
- Plug n go electrical kit available for machines with no service plug.
Specifications Angle Only:
- Angle Tilt: ±14°
- Angle (Left & Right): ±30°
- Width (15° Angle): 2082mm
- Width (30° Angle): 1880mm
- Width (Overall): 2133mm
- Length (Overall): 840mm
- Height (Overall):725mm
- Weight: 519 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA ANGLE & TILT DOZER BLADE - 2100MM -DZ-000109

The Minos Agri TDSP Flail Mower/Mulcher is suitable for topping Grass, Orchards, Vineyards and general mulching use and is a rear tractor mount implement with 3 point linkage, driven by a 540rpm tractor PTO.
Working widths available from 1200mm to 2600mm. Utilises a heavy duty rotor with hammers, heavy duty body, rear rakes and an adjustable rear roller that combined helps to preserve cutting height, blade strength and balance even on uneven soil.
Specifications:
Working Width: 1850 mm
Overall Width: 2040 mm
Overall Length: 1100 mm
Overall Height: 1050 mm
Number Of Blades: 20
Machine Weight: 680 kg
PTO: 540 rpm
Required Power: 55 HP
Options:
Hydraulic Offset (included in this model)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI TDSPH-1850, HYDRAULIC OFFSET MULCHER

When a single row of gangs isnt enough to get the results you are hoping for, then its time to call on the literal earth-shattering power of Farmtechss Maxi series!
The Maxi series offers maximum aeration capability with its additional row of gangs that effectively doubles the effect especially in areas of cultivation by increasing the shattering effect of the soil.
The Maxi series boasts a standard lineup of 4 rigid frame models with working widths that range from between 3-meters to 5-meters. Each requires a tractor with a power output thats somewhere between 120-200 HP depending on the effective width of the model. Center Folding trailing models are also available
To achieve the best results, we highly recommend combining the Maxi series with an electric seeder and a spring tine harrow to create a true one-pass renovator so you can simultaneously perforate the soil as well as apply seeds on your paddock.
Specifications:
Size: 6000mm
No. Tines Per Rotor: 4
Mounting: Linkage
Standard Features:
Heavy duty over spec steel frames made of Australian steel.
Hot dipped galv finish
Two rows of gangs
tines are spaced at 95mm
Large rotor bearings
multi-gang system
aeration and cultivation settings
Available Configurations:
3PL or trailing
fixed or folding frame
2.4 to 5-meter working width
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 6M - GH-6004 MAXI. MIN 200+ HP (3PL)

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 929 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

MINOS AGRI 5 TINE CHISEL PLOUGH WITH ROLLER 1.25M - CZ-5-M. 60-70HP

GENTECH 8.5 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

AGRIFARM MACADAMIA MULCHER AHM SERIES - 240CM (70+HP) - AHM/240-M

MUTHING MU-H/S 140 REAR & SIDE MULTI PURPOSE FLAIL MOWER

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

AGRIFARM GALVANISED 150CM SIDE DISCHARGE ROTARY SLASHER (75HP) - AHS-STS SERIES

AGRIFARM MULCHER AHM SERIES 160CM (50+HP REQ) - AHM/160

MUTHING ECOTOP 180 MULCHER (OFFSET 30CM) SUITS 30-75HP

MINOS AGRI BETA DTM-24 SPRING MOUNTED DISC ARM - 3.2M (95-110HP)

DIGGA ANGLE & TILT DOZER BLADE - 2100MM -DZ-000109

MINOS AGRI TDSPH-1850, HYDRAULIC OFFSET MULCHER

AERVATOR GH SERIES 6M - GH-6004 MAXI. MIN 200+ HP (3PL)

Farm Supplies Machinery & Equipment

Dealer Address