Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

Medium duty power harrow for tractors up to 110 / 130hp.
Suitable for small agricultural applications.
Specifications:
Actual Width: 255cm
Working Width: 250cm
Required HP: 80-110hp
Weight: Cage roller - 770kg, Packer roller - 880kg
No of Blades: 20
Features:
Rated up to 110hp
324 rotor speed
540 rpm
Category two linkage
Manual depth control
Rear levelling bar with winder control and indicator
285 x 90 x 12mm tines
285mm working depth
45 degree sliding side plates
Shearbolt safety on driveshaft
Greasable top bearings
Accessories:
Hydraulic kit for roller adjustment
Four speed gearbox (540 / 1000 rpm) - rated to 130hp
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
RANGER250 250cm Working Width 80-110HP 20 Tines
RANGER300 300cm Working Width 85-110HP 24 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (80-110 HP) RANGER POWER HARROW

Ideal for small areas or occasional spot spreading. The Earthway 3400 Hand Operated Spreader is an ergonomic spreader for use with seed, fertiliser and any granular material.
Designed with an integrated scoop design, the 3400 can grab the product out of bags or cans so you dont need to touch the material you are spreading.
Small, cost effective and easy to store due to it's compact size.
Features:
Rustproof poly 110 cubic inch/1.8 litre capacity
Adjustable rate control
High-speed hand crank gearbox
1-Year Limited Warranty
Ergonomic handle and scoop front design
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

EARTHWAY HAND HELD SPREADER EARTHWAY- ES-3400

Murray 2 sections with bar, 1.93m Series 04 Diamond Harrow System. Complete set with standard drawbar.
4102- 2 sections with bar - 1.93M
Suitable for open country and lighter loamy soils, Murray Diamond Harrows are an effective implement used for weed control and final seedbed preparation.
Specialising in shattering soil crusts allowing improved aeration and moisture penetration, it will give your crops every chance of reliable germination and subsequent vigour.
The Diamond frame design is constructed using flat bar material providing the Harrow with strength and rigidity. It features replaceable bolt-in 16mm square section High Carbon Steel tapered tines with a working depth between 50 to 80mm (2 to 3).
Murray Diamond Harrows are supplied in sets complete with drawbars, ranging from 2 sections 2.03m (68) to 10 sections 10.16m (334). Lift type sets using our 3 Point Linkage Hoist Frame (Series 21) are available, making transportation of your Harrows easy and convenient. The complete set is comprised of a Front Lift Drawbar, Harrow Sections, Rear Lift Drawbar and 3 Point Linkage Hoist Frame (Series 21).
Features:
- 2 Point Pull (2PP). Replaceable bolt-in 16mm square section High Carbon Steel tapered tines.
- Manufactured from flat bar material
Specifications:
-30 kg (66lb).
- Coverage 0.97M (32).
- Tine Spacing 51mm (2).
- Tine Length 152mm (6) approx
- Centre to centre of Front Hooks 508mm (20).
- 5 Rank / 20 Tines.
- Tapered Tines with working depth between 50 80mm (2 3)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 1.93M DIAMOND HARROW SYSTEM 2 SECTIONS WITH BAR-COMPLETE SET WITH STANDARD DRAWBAR

The most renowned and popular air seeder, available as a stand alone unit, or fitted up ready to go on a Celli power harrow or spikes rotor. All seeders include a low hopper sensor as standard, and come with 4 sowing shafts to cover a large range of seeds.
Features:
300 (PS300) or 500 (PS500) Litre Hopper
Electric Fan (PS300)
Hydraulic Fan (PS500)
8 Outlets
4 seed rollers/sowing shafts
5.2 control box
8m power cable
Calibration button
Fill level sensor
25m of hose
Agitator
Calibration slide
Counter plate
Calibration bag
Seed scale
8 splash plates
4 x 1.2m Hex bars for mounting plates
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI PS 300L AIR SEEDER (ELECTRIC FAN)

7 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
304 Auto Reset Panerazers are the ultimate sub soiling machine. Especially when the soils to be aerated are heavy & full of obstructions.
Being auto reset makes your sub soiling job seamless as the legs simply lift over any obstruction & immediately reset automatically so you can continue aerating your soils without stopping. Leaf spring reset has a great advantage over rams, not only do they require less maintenance, but the legs are at the highest point of resistance while in the ground & resistance reduces as they lift.
This ensures the legs do not tip falsely but ensures they do clear obstructions when struck.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build RHS main frame construction with reinforcing to cope with hard conditions. The wear protected legs are also securely bolted into the reset mounts.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
The auto reset system is powered by heavy duty leaf springs mounted on each leg. Leaf springs reset immediately after tripping & clearing the obstacle unlike other reset systems such as hydraulic. This tension is easily adjusted via the 'tension bolt' mounted on the leg. This enables the operator to adjust the tension to the ideal level required for the ground they're operating in. The tension adjustment spanner is included with the implement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 7 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

Series 38 Manual winch rigid frame with 3 section rigid S04 Diamond Harrow. 2.90m. Transport width: 3.11m..
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.90M MANUAL RIGID FRAME DIAMOND HARROW

Series 08 - 4.31m Stump Jump Harrow 3 Point Linkage Hoist Lift Type (4 point pull) featuring Series 21 Hoist Frame - Complete Set.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not stump jump harrows. Picture is for example only.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Series 21 3-Point Linkage Hoist Frame.
8031 - 5 section 4.31m (14ft 2in) - 349kg.
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 4.31m (14ft 2in).
- Weight 349kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.31M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

CS Series Linkage disc cultivator 1.8m, 16 plate x 22 inch discs.
Designed for light-medium (BS) and medium-heavy (CS) secondary tillage applications, such as orchard and vegetable farming, general farming, weed control and fire breaks.
Features:
- Spring-mounted headstock (BS)
- Square DURAX axles
- Triple sealed, self-aligning bearings
- Gang angle adjustment for tillage control (CS)
Specifications:
- 22 inch discs
- 16 discs
- Weight: 550kg
- 1.8m cut
- 50hp required
- Cat 1 linkage.
Options:
- Trash scraper set
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS 1.8M LINKAGE DISC CULTIVATOR CS SERIES 22INCH DISCS

RM40 18 Plate Heavy Duty Trailing Offset 0821
The RM40 is one of the most popular of our wide range of offset and tandem disc cultivating ploughs.
Features:
Great digging ability ideal for primary and secondary tillage using 40Hp to 90HP tractors.
Twin pressure screws each side can be adjusted individually.
Easy gang adjustment for the perfect level finish.
Solid cast spools individually machined to suit the disc for extra strength.
Triple sealed bearings.
230mm (9 inch) disc spacing.
Fitted with 560mm x 5mm (22 inch x 3/16 inch) scalloped discs.
28mm square high tensile gang bolts.
Weight where it counts in the gang not ballast on the frame (which adds load to the bearings) like most other machines.
Prong type scrapers are standard equipment formed scrapers available on request.
Fully adjustable drawbar adjustable offset ideal for orchards.
Fitted with Holden type tyres.
Specifications:
Approx Weight 1040kg
No. Bearings 6
Cutting Width 2.06m (6ft 9in)
No. Axles 2
Options:
0951 Optional Jack
0953 Optional Furrow filler (not sold separately)
* Upgrade to 24 inch x 5mm discs POA

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM40 18 PLATE HEAVY DUTY TRAILING OFFSET - 0821, SUIT 40-90HP

2.56m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3302 - 2.56m (8ft 5in) - 1/9 Tine, 2/12 Tine - 35kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

260 series Mekfold Folding Power Harrow with 450mm cage roller.
Specifications:
Tractor HP: 180-260
Working Width: 5920mm
Folded Width for Transport: 2500
Working Depth: 100-300
Blades: 48
Weight: 2880kg
Features:
- Single speed central gearbox (1000 RPM) and multi speed side gearboxes.
- Phased rotors.
- Stone protection system.
- Levelling bar standard.
- Floating side shields.
- Folded width 250cm.
- 450mm Cage roller standard.
- Konic - tapered roller bearings on MEKFOLD350.
- 1 3/4" 20 spline PTO with cam clutch.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 6M MEKFOLD260 POWER HARROW (180-260HP) WITH 450MM CAGE ROLLER

Find Tillage AND Seeding For Sale. Browse 984 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

CELLI 2.5M (80-110 HP) RANGER POWER HARROW

EARTHWAY HAND HELD SPREADER EARTHWAY- ES-3400

MURRAY 1.93M DIAMOND HARROW SYSTEM 2 SECTIONS WITH BAR-COMPLETE SET WITH STANDARD DRAWBAR

CELLI PS 300L AIR SEEDER (ELECTRIC FAN)

RATA 7 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

MURRAY 2.90M MANUAL RIGID FRAME DIAMOND HARROW

MURRAY 4.31M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

JARRETT IMPLEMENTS 1.8M LINKAGE DISC CULTIVATOR CS SERIES 22INCH DISCS

JOHN BERENDS RM40 18 PLATE HEAVY DUTY TRAILING OFFSET - 0821, SUIT 40-90HP

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

BREVIGLIERI 6M MEKFOLD260 POWER HARROW (180-260HP) WITH 450MM CAGE ROLLER

Farm Supplies Machinery & Equipment

Dealer Address