Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 5MM DISCS - 0832, SUIT 60-130HP

Features:
- 40 lb / 18 kg Hopper capacity rustproof poly construction
- Super-duty high-speed gearbox
- Epoxy Powder Coated Chassis
- EVEN-SPREAD PRO Dual Port Adjustable Shut-Off System
- Heavy-duty Rain Cover #77001
- Rate Calculation Matrix included
- 1-Year Limited Warranty
- Lifetime tech support
The 3100 Professional Hand Crank spreader is your ideal broadcast spreader when you need to spread granular material in wet areas, over uneven terrain, or in places a push spread could not go.
Finally, a chest spreader that you will love. Our professional-quality, 40 lb/18kg capacity chest mount spreader comes equipped with straps designed for fitting comfortably across the back.
The wide footprint makes the unit easy to fill, and the included hopper cover protects the operator while this unit is in use.
The hopper cover protects against moisture from getting in and dust from getting out.
Go places a no-wheeled spreader can travel with 40lbs/18lg of your favourite material. Seed grass in waterways, road banks, wet areas, and places food for wildlife (deer, ducks, fish). With the EVEN-SPREAD® PRO Dual Port Adjustable Shut-Off System, the user can infinitely balance the spread pattern based on material size, weight, and flight characteristics, and the Super-duty high-speed gearbox, spread widths of 15ft/4.5m are common.
Epoxy powder coated tubular steel chassis with integrated stand, wide comfortable carrying straps; the 3100 is a perfect choice.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

EARTHWAY 18KG HAND CRANK BROADCAST SPREADER EARTHWAY - ES-3100

Note: This model does not include a crumbler, however, it is available as an option. The second & third picture of this listing shows the cultivator with a crumbler.
Features:
Heavy duty model features a 50×50 RHS frame throughout with larger tines, providing a heavier and more rigid machine for hard ground and primary cultivation.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 24
Tine Size: 45mm x 12mm
Frame Size: 50mm x 50mm RHS
Tractor HP Guide: 3HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Solid Rubber Depth Wheels
HD Tine helpers
3.6m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.6M S-TINE (24 TINES) HEAVY DUTY CULTIVATOR - MIN 72HP

Medium duty rotary hoe suitable for tractors up to 120hp.
Specifications:
Actual Width: 257cm
Working Width: 235cm
Required HP: 80-120hp
Weight: 745kg
No of Blades: 54
Features:
Rated up to 120hp
PTO 540rpm 4 speed gearbox (155-180 models)
PTO 1000rpm 2 speed gearbox (205-305 models)
Swinging lower links
Gear side drive
80x7mm L blades
6 blades per flange
250mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike rotor (30x30x170mm spikes) c/w 2 piece adjustable tailgate (180-305 only)
Anti-pan (straight blade) rotor c/w 2 piece adjustable tailgate (180-305 only)
Roller Options:
Cage Roller (385mm diameter)
Ergon 155 = 860kg with roller
Ergon 180 = 880kg with roller
Ergon 205 = 920kg with roller
Cage Roller (440mm diameter)
Ergon 230 = 980kg with roller
Ergon 255 = 1050kg with roller
Ergon 280 = 1110kg with roller
Ergon 305 = 1180kg with roller
Packer Roller (420mm diameter)
Ergon 155 = 920kg with roller
Ergon 180 = 1000kg with roller
Ergon 205 = 1080kg with roller
Packer Roller (470mm diameter)
Ergon 230 = 1160kg with roller
Ergon 255 = 1240kg with roller
Ergon 280 = 1300kg with roller
Ergon 305 = 1380kg with roller
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models
ERGON120-155 160cm Working width 60-120hp 600kg 36 Blades
ERGON120-180 185cm Working width 70-120hp 650kg 42 Blades
ERGON120-205 210cm Working width 75-120hp 690kg 48 Blades
ERGON120-230 235cm Working width 80-120hp 733kg 54 Blades
ERGON120-255 260cm Working width 85-120hp 770kg 60 Blades
ERGON120-280 285cm Working width 90-120hp 800kg 66 Blades
ERGON120-305 310cm Working width 100-120hp 880kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.35M (80-120HP) ERGON ROTARY HOE

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60 -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

2.79m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3503 - 2.79m (9ft 2in) 4/12 Tine - 50kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

Cultivator - 4 Row 190
Cultivators are a secondary tillage product, for preparing seedbeds, and controlling weeds.
3 and 4 row models available with heavy duty S tines set up with trash flow pattern.
With the addition of a Bracket a Daken C Seeder can be mounted making it a simple but effective sowing device.
Features:
- Strong rugged construction
- Trash flow tine pattern
- Suits Cat 1 & 2
- C seeder bracket supplied
- 12mm heavy duty S tines
- 3 and 4 rows
- Suitable to have C Seeder mounted
- Tines mounted approx. every 300mm
- 2 Year Warranty
- Weight: 233kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CULTIVATOR MODEL 4 ROW 190 GALVANIZED - 03100DC

Series 38 Manual winch rigid frame with 2 section rigid S04 Diamond Harrow. 1.93m. Transport width: 2.09m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 1.93M MANUAL RIGID FRAME DIAMOND HARROW

Designed for small to medium size tractors.
Popular cultivation tool used to break up soil for preparing crops or controlling weeds. Discs can cut up and mix in trash, are very hard wearing, long lasting and easy to use.
Fitted with 28mm (1 1/8in) square high tensile gang bolt axles and high quality triple sealed bearings.
14-18 plate models fitted with 75x75x6mm double beam whilst 10-12 plate models are fitted with main single beam and angle support bracket.
Cat 1/2 linkage.
Clamped on by U-bolts for simple adjustment.
Bellota Boron discs are manufactured under strict quality specifications that ensure the right hardness and uniformity throughout the disc. This includes clamp hardening to prevent distortion, lathe turning of the edges and hardened to 50HRc for low wear and long life.
Features:
No of Discs 16
Disc Diameter 550mm (22inch)
Disc Thickness 5mm
HP (min) 40HP
No. Bearings 4
Working Width 1825mm (6ft)
Weight 415kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 16 PLATE X 22 INCH DISCS - 0250, MIN 40HP

2.79m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3603 - 2.79m (9ft 2in) 4/12 Tine - 66kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

4.41m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3610 4.41m (14ft 6in) 5/12 Tine, 1/16 Tine 110kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.41M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Find Tillage AND Seeding For Sale. Browse 980 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 5MM DISCS - 0832, SUIT 60-130HP

EARTHWAY 18KG HAND CRANK BROADCAST SPREADER EARTHWAY - ES-3100

JOHN BERENDS 3.6M S-TINE (24 TINES) HEAVY DUTY CULTIVATOR - MIN 72HP

CELLI 2.35M (80-120HP) ERGON ROTARY HOE

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

DAKEN CULTIVATOR MODEL 4 ROW 190 GALVANIZED - 03100DC

MURRAY 1.93M MANUAL RIGID FRAME DIAMOND HARROW

JOHN BERENDS MEDIUM DUTY OFFSET DISCS - 16 PLATE X 22 INCH DISCS - 0250, MIN 40HP

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY SERIES 03 LEVELLING HARROW 4.41M, 4 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Farm Supplies Machinery & Equipment

Dealer Address