Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
5 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 5'9" (1.75M) - 0182

Model:
FA804 6ft Toolbar, heavy duty headstock, 2 x 20 in disc hillers, clamps and wedges
Other bed maker assemblies and components also available.
Farm Aid disc hillers are entirely Australian products. Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID BED MAKER ASSEMBLY (HEAVY DUTY) WITH 20IN DISC HILLERS - FARM AID - FA804

Rotavator Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROTAVATOR BLADE CURVED (LH) 60 X 6MM

The Deep Tillage plough is designed for shattering compact ground with minimal disturbance to the sub soil.
Ideal for ripping hard ground prior to cultivation and for aerating pastures, therefore increasing water absorption & improving the profile of the soil.
Can be used to renovate pastures or for bed renovation. Broad acre application and row cropping. High tensile cast shank assembly with 24 underframe clearance with 1 shear pin protection.
Replaceable points and shin guards, also available with tungsten tips.
Optional crumbler rollers also available to help create a level surface and reduce crusting in the surface.
Optional coulters available to reduce surface disturbance in pasture (must be ordered with machine).
Specifications:
Heavy duty 100 x 100 x 9mm tine mounting frame.
High tensile cast shank assembly with 24in (610mm) underframe clearance with 1in shear pin protection. Replaceable points and shin guards also available with tungsten tips.
Breakout force approx. 4000 ft. / lbs.
Tine spacing set at 12in (300mm).
Approx 15HP required per tine.
Adjustable pair of Holden wheel for depth control available as an option.
Optional coulters available to reduce surface disturbance in pasture.
Available in 2, 3, 5, 7, 9 or 11 tine models with other sizes made on request. 2 and 3 tine models are fitted on a single row frame. Trailing units also available.
Options:
0327 14in Coulters (must be ordered with machine) priced per coulter unit.
0355 Optional Hydraulic Phasing Cylinders to replace ratchets.
0200 Depth Wheels (Pair Holden) optional normally mounted outside frame.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS DEEP TILLAGE PLOUGHS 2 TINE - 0321, MIN 30HP

Strong compact tandem disc ideal for vineyards, orchards and horticulture.
Features:
Excellent digging ability.
Easy ratchet gang adjustment.
Available in 16, 20 and 24 plate models.
Buster tine removes centre ridge to create a level finish.
Solid cast spools are individually machined to suit the disc for
extra strength.
230mm (9 inch) spacing.
Fitted with 560mm x 5mm (22 inches x 3/16 inch) scalloped discs as standard.
28mm square high tensile gang bolts.
Triple sealed bearings.
Options:
0948 Optional Scrapers suit 20 plate TH30
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH30 20 PLATE HEAVY DUTY TANDEM DISCS - 0815

Farm Aid disc hillers are entirely Australian products, designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
Model: FA802 20in with 2in round shank, clamp and wedge
Bed maker assemblies and components also available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID 20IN DISC HILLER WITH CLAMP AND WEDGE - FARM AID - FA802

Features:
90 HP single speed gearbox.
2050mm working width.
Side gear drive.
CE safety guards.
54 x C Blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 60-90 HP
Working Width: 2050mm
Working Depth: 100-200mm
Product Weight: 585kg
Total Width: 2300mm
Options:
Front Depth Wheels
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 2.05M B85 ROTARY HOE (MIN 60-90HP)

Heavy duty power harrow for tractors up to 200 hp. Ideal for large agricultural operations and contractors.
Specifications:
Actual Width: 405cm
Working Width: 400cm
Required HP: 150-200hp
Weight: Cage roller - 1410kg, Packer roller - 1620kg
No of Blades: 32
Features:
Rated up to 200hp
Two speed gearbox
1000rpm
Category two linkage
Swinging lower links
Rear levelling bar with winder control and indicator
Tine locking counter plates
Manual depth control
300 x 120 x 15mm tines
300mm working depth
45 degree sliding side plates
Shearbolt clutch
Greasable top bearings
Accessories:
Hydraulic adjustment for rear roller
Oil cooling kit
Automatic safety clutch on driveshaft (Cam clutch)
Rotor protectors
Options:
Roller Options
Cage roller (440mm diameter)
Packer roller (470mm diameter)
Models:
ENERGY300 300cm Working Width 100-200 HP 24 Tines
ENERGY350 350cm Working Width 130-200 HP 28 Tines
ENERGY405 400cm Working Width 150-200 HP 32 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 4M (100-200 HP) ENERGY POWER HARROW

Series 08 - 4.31m Stump Jump Harrow 3 Point Linkage Hoist Lift Type (4 point pull) featuring Series 21 Hoist Frame - Complete Set.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not stump jump harrows. Picture is for example only.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Series 21 3-Point Linkage Hoist Frame.
8031 - 5 section 4.31m (14ft 2in) - 349kg.
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 4.31m (14ft 2in).
- Weight 349kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.31M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

Medium duty rotary hoe with gear side drive. Suitable for tractors up to 55 hp.
Specifications:
Actual Width: 190cm
Working Width: 175cm
Required HP: 25hp
Weight: 322kg
No of Blades: 36
Features:
Rated up to 55hp
Single speed gearbox
540 rpm
Side gear drive
70 x 7mm "L" blades
200mm working depth
Side-skids
Foot stand
Slip clutch
Models:
APLHA 155 160cm Working Width 25-55hp 310 kg 36 Blades
APLHA 165 175cm Working Width 25-55hp 322 kg 36 Blades
APLHA 185 185cm Working Width 30-55hp 330 kg 42 Blades
APLHA 155 155cm Working Width 35-55hp 342 kg 42 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (55HP GEARBOX) ALPHA ROTARY HOE

Heavy duty double drive fixed rotary hoe suitable for tractors up to 280 hp.
Specifications:
Actual Width: 413cm
Working Width: 391cm
Required HP: 180-280hp
Weight: 2000kg
No of Blades: 90
Features:
Rated up to 280 hp
Unique central split gearbox system for high horsepower loading and efficient torque distribution
Two speed side gearboxes with available gear speeds of: 208,230,260,284,310,340,375,410
Swinging lower links
Gear side drive
Side drive shafts with automatic safety clutches (CAM)
80 x 8mm 'L' blades
6 blades per flange
250mm working depth
Side skids or rear rollers with hydraulic adjustment
Adjustable , spring loaded tailgates
Options in Lieu of Standard:
Rotor Options
Double flange rotor (c/w 10mm blades)
Spike rotor spike (30x30x195)
Anti-pan rotor (10mm straight blade)
Roller Options
Cage roller (500mm diameter) with hydraulic adjustment
Packer roller (555mm diameter) with hydraulic adjustment
Models:
TIGER 280DD-400 391cm Working Width 180-280hp 2000kg 90 L blades
TIGER 280DD-450 441cm Working Width 200-280hp 2120kg 102 L blades
TIGER 280DD-500 491cm Working Width 220-280hp 2240kg 114 L blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.91M (180-280 HP) TIGER ROTARY HOE

Find Tillage AND Seeding For Sale. Browse 977 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 5'9" (1.75M) - 0182

FARM-AID BED MAKER ASSEMBLY (HEAVY DUTY) WITH 20IN DISC HILLERS - FARM AID - FA804

SPAREX ROTAVATOR BLADE CURVED (LH) 60 X 6MM

JOHN BERENDS DEEP TILLAGE PLOUGHS 2 TINE - 0321, MIN 30HP

JOHN BERENDS TH30 20 PLATE HEAVY DUTY TANDEM DISCS - 0815

FARM-AID 20IN DISC HILLER WITH CLAMP AND WEDGE - FARM AID - FA802

BREVIGLIERI 2.05M B85 ROTARY HOE (MIN 60-90HP)

CELLI 4M (100-200 HP) ENERGY POWER HARROW

MURRAY 4.31M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

CELLI 1.75M (55HP GEARBOX) ALPHA ROTARY HOE

CELLI 3.91M (180-280 HP) TIGER ROTARY HOE

Farm Supplies Machinery & Equipment

Dealer Address