Farm Supplies Machinery & Equipment

10ft (3m) Pasture Toppers with 75HP centre gearbox & 45HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 45hp end gearboxes and connected by a 75hp centre gearbox. Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 45HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

Silvan General Purpose Slasher - 1.07m (3ft 6 inch)
Suits 18-40 HP
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 18-40 HP
- Working Width (mm): 1070
- Product Weight (kg): 151
Options Available:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.07M 102 GENERAL PURPOSE SLASHER (SUIT 18-40HP)

A rugged, extra tough slasher built to take real punishment from continuous work ideal for contractors.
Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular cross members where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
Unlimited HP oil lubricated Italian gearbox with unbreakable 90mm output shaft with 5 Year Manufacturers Warranty.
Twisted and stepped 75 x 16mm Boron slasher blades create an updraft effect which lifts the grass flattened by the tractor wheels. All bushes are thoroughly hardened.
Made in Australia.
The blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Cat 2 three point linkage as standard.
Specifications:
0085 Warrior 5ft 10in with adjustable skids
Cutting Width 1750 mm
Overall Width 1960 mm
Tractor HP 100+
Cutting Height 25-100mm
Weight 651 kg
Galvanised Body
Dual Solid Rubber Wheelkits
Additional Skid Wear Runners
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS WARRIOR EHD CONTRACTOR SLASHERS 1.8M - 0085, 100+HP

XHD Series Slashers. 1.8m, min 50HP.
Features:
150 HP 540 rpm high-speed gearbox
Multi-plate, asbestos free, brass impregnated friction clutch
Heavy duty monocoque pressed 6mm deck plate
Clean body lines to minimise grass build up
Hot dipped galvanised deck
Pivoting headstock with chain backstays
Adjustable height, high clearance skids
Heavy duty spring steel blade carrier
Heavy duty swing back lift blades
Front and rear chain guards
Adjustable height castor wheels
Painted components finished in high quality durable two pack polyurethane
Painted components available in red or green.
Specifications:
Working width: 1.8m (6')
Weight: 700kg
HP: 50
Finish: Galvanised deck
Options:
4 Blade
Offset 200 mm to the right
Sign Rack
Tool Box
Support Legs
Hydraulic Fan
Rear Lights
Extra Wheel kit for XHD-72
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP

The Daken contractor slasher is designed for heavy-duty slashing, and is suitable for tractors ranging from 100 to 150 hp.
Features:
- Floating headstock
- 4 position height adjustable
- Reversible skids
- Headstock is centrally mounted on this 2.1m model
- Clevis hitch
- Quality CMR 130HP 1.1467 gear box
- Quality CMR Series 10 internal star tube PTO
- Hardwearing laminated Australian made rotor assembly
- 6mm body plate with added reinforcement bracings
- Galvanised dipped body
- Depth wheels standard x 2
- Heavy-duty 130hp gearbox with 8 inch slip clutch
- Chain guards front and rear as standard
Dimensions
Length = 260 cm
Width = 225 cm
Weights = 800 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 2.1M CONTRACTOR SLASHER (135HP)

8ft Twin Rotor Slasher (Galvanised) - suit 70-100hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Bare-Co components are readily available from all good machinery dealer outlets located Australia wide
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 6mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 100 HP Centre gearbox.
- Bare-Co 75 HP Outer gearboxes.
- 2 Year Gearbox Warranty
- Bare-Co slip clutch
- Bare-Co Series 8 PTO shaft
- Front and rear safety chains
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on
material flow
- Bare-Co gearbox/slip clutch safety guarding
- Reinforced A-frame for strength and functionality
- Optional wheel kits available (two-wheel kits are recommended for the 8ft slasher)
Specifications:
- Recommended Tractor (HP) - 70-100
- Cutting Width (mm) - 2,400
- Overall Width (mm) - 2,690
- Approx weight = 980 kg
- Number of Blades - x4 - LH Suction Lift style approx 2.62 kg (each)
- Blade Tip Speed (m/s max.) - 99
- Deck Thickness (mm) - 6
- 3-Point Hitch - Category Two
- Gear Box / Capacity - Bare-Co 1:1.93 / 100HP
- Bare-Co 100HP slipclutch & series 8 PTO shaft
- Grass Discharge - Rear Discharge
- Blade Carrier - Cutter Bar
- Optional Wheel Kit(s) - Twin kit available
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 8FT TWIN ROTOR GALVANISED SLASHER, SUIT 70-100HP

LE Series Slashers. 2M, suits 50-75HP.
Features:
5mm galvanised deck
Cat I & II
Adjustable skids
Pivoting headstock with chain backstays
PTO driveshaft
Friction clutch
Front & rear chain guards
Standard to suit 30-75 HP tractors
Gearbox available in red or yellow.
Specifications:
Working width: 2m (6'8")
Weight: 500kg
HP: 50-75
Finish: Galvanised deck
Options:
Combination Friction & Overrun Clutch
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP LE SERIES SLASHERS 2M - SUIT 50-75HP

A robust medium duty slasher to suit small to medium size tractors. Australian made using high quality European components. Excellent value for money.
Features:
Body designed to take real punishment. 3mm top plate and strong 6mm thick side panels prevent denting.
Bondioli & Pavesi Series 4 pto driveshaft with 2 plate slip clutch protects slasher and tractor. Optional over-run clutch to suit tractors with single stage clutch.
40 HP oil lubricated Comer gearbox. Optional Italian manufactured gearbox upgrade.
Hardened and tempered stepped/bushed slasher blades.
Available in 5 widths with dual mounting (centre or offset).
Floating headstock for working on undulating ground.
Optional pneumatic wheelkits available for depth control.
Fitted with front and rear chain guards.
Cat 1/2 linkage.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Dual Mount
Cutting Width 1460mm
Overall Width 1560mm
Overall Length 1580mm
Tractor HP 25-50
Cutting Height 25-100mm
Weight 250kg
Options:
1588UG Italian Manufactured 40HP Gearbox Upgrade
0065 EP Slasher Wheel Kit (Pneumatic Wheel)
0148 Additional over-run clutch (suits tractors with single stage clutch)
0062GAL EP150 with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EP150 MEDIUM DUTY SLASHERS 1.5M (40HP)

XLE Series Slasher. 1.5m, suits 60-100 HP - Australian Made
Specifications:
Working width: 1.5m (5')
Weight: 360kg
HP: 60-100
Finish: Galvanised Deck.
Features:
5mm galvanized deck.
Suits 60-100 HP tractors.
Cat I & II.
Adjustable skids.
Pivoting headstock with chain backstays.
PTO driveshaft.
Friction clutch.
Front and rear chain guards.
Gearbox available in red or yellow.
Optional Extras:
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XLE SERIES SLASHERS 1.5M - SUIT 60-100HP

The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 75hp end gearboxes and connected by a 75hp centre gearbox. Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment. 14 inch Holden wheels are optional for depth control.
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (with adj skids) 25-100mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 75HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3M PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

Daken 405 Series Slashers - 1.35m 405 Slasher.
Our long experience in slasher design continues with these Daken 405 Series Slasher which are light to medium duty slashers. Built with no under body bracing and with good rotor to body clearance they do a great cutting job.
The 405 series slashers are suitable for many cutting applications for tractors up to 50hp (40hp gearbox). They are not built to a price but fully featured to give you the best possible performance.
Features:
- Built to comply with the stringent Work Cover regulations.
- Gear box 40hp
- Gear box 1.1.93 Ratio
- Body Plate 4mm
- Adjustable skids
- Laminated Rotor
- Floating Headstock
- Can be offset left or right
- 6 two plate slip clutch
- Cat 0/1
- Hot dipped galvanised finish
- Comes with series 4 PTO shaft and Chain guards front and rear.
- Weight = 277 kg
Options:
- Level wheel suits all 405 models
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 1.35M SLASHER 405 SERIES 40HP GALVANISED - 55630DC

Silvan 102 General Purpose Slasher - 1.2m (4ft)
Suits 20-40 HP.
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 20-40 HP
- Working Width (mm): 1,200
- Product Weight (kg): 181
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Options Available:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.2M 102 GENERAL PURPOSE SLASHER (SUIT 20-40HP)

Find Slashers For Sale. Browse 135 Slashers listings from Farm Supplies Machinery & Equipment.

New & Used Slashers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

SILVAN 1.07M 102 GENERAL PURPOSE SLASHER (SUIT 18-40HP)

JOHN BERENDS WARRIOR EHD CONTRACTOR SLASHERS 1.8M - 0085, 100+HP

FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP

DAKEN 2.1M CONTRACTOR SLASHER (135HP)

SOUTHERN CROSS AG MACHINERY 8FT TWIN ROTOR GALVANISED SLASHER, SUIT 70-100HP

FIELDQUIP LE SERIES SLASHERS 2M - SUIT 50-75HP

JOHN BERENDS EP150 MEDIUM DUTY SLASHERS 1.5M (40HP)

FIELDQUIP XLE SERIES SLASHERS 1.5M - SUIT 60-100HP

JOHN BERENDS 3M PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

DAKEN 1.35M SLASHER 405 SERIES 40HP GALVANISED - 55630DC

SILVAN 1.2M 102 GENERAL PURPOSE SLASHER (SUIT 20-40HP)

Farm Supplies Machinery & Equipment

Dealer Address