Farm Supplies Machinery & Equipment

GM36-900 - 3 Rotor Heavy Duty Slasher
Gearbox Rating 150hp
3.6m (12ft) working width
100hp (min) Tractor HP required
Features:
Gear drive rear discharge slasher
Cat I and II
Adjustable skids
PTO drive shaft
Multi plate asbestos free brass impregnated friction clutch
Heavy duty monocoque pressed 6mm deck plate
Clean body lines to minimise grass build up
Pivoting headstock with chain backstays
Adjustable height high clearance skids
Extra heavy duty spring steel laminated blade carrier
Heavy duty swing back heat treated lift blades
Front and rear chain guards
Twin heavy duty adjustable height rear castor wheels
Galvanised deck standard
Painted components available in red or green.
Other colours available on request
Model
GM36-900 Gearbox Rating 150hp 3.6m (12ft) working width 100hp (min)
Options:
- Mulching Option standard blade carrier double stacked fitted with 2 stepped and 2 straight blades per rotor priced per rotor
- 1,000 RPM upgrade
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP GM SERIES SLASHERS GM36-900 - MIN100HP

Built for rugged Australian conditions using top quality components. Horsepower requirements of 40-75HP. Available in 5ft (1.5m) to 6ft6in (2.0m) sizes.
A slasher manufactured for rugged Australian conditions, heavily built using top quality components to give you the best value for money obtainable.
Features:
One piece body made from 6mm quality steel. Excellent underframe clearance clears cut material quickly.
Bondioli & Pavesi Series 5 pto driveshaft with 2 plate slip clutch protects slasher and tractor.
75 HP oil lubricated gearbox. Optional Italian manufactured gearbox upgrade. Excellent seal guards make it virtually impossible for wire to damage the gearbox.
Cat 1/2 linkage.
Hardened and tempered straight/stepped bushed slasher blades.
Floating headstock for working on undulating ground.
Optional solid rubber wheelkits and rollers available for depth control.
Standard with front and rear chain guards.
Document holder supplied.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Centre Mount
Cutting Width 1950mm
Overall Width 2080mm
Overall Length 2060mm
Tractor HP 40-75
Cutting Height 25-100mm
Weight 490kg
Options:
1590UG Italian Manufactured 75HP Gearbox Upgrade
0095 Heavy Duty Slasher Wheel Kit (Pneumatic Wheel)
0110GAL HD200 Slasher with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HD200 SLASHERS 2M - 0110, 40-75HP

GM30-900 Heavy Duty 3 Rotor Slasher
Gearbox Rating 150hp
3m (10ft) Working Width
75hp (min) Tractor HP required
Features:
Gear drive rear discharge slasher
Cat I and II
Adjustable skids
PTO drive shaft
Multi plate asbestos free brass impregnated friction clutch
Heavy duty monocoque pressed 6mm deck plate
Clean body lines to minimise grass build up
Pivoting headstock with chain backstays
Adjustable height high clearance skids
Extra heavy duty spring steel laminated blade carrier
Heavy duty swing back heat treated lift blades
Front and rear chain guards
Twin heavy duty adjustable height rear castor wheels
Galvanised deck standard
Painted components available in red or green.
Other colours available on request
Model:
GM30-900 Gearbox Rating 150hp 3m (10ft) Working Width 75hp (min)
Options:
- Mulching Option standard blade carrier double stacked fitted with 2 stepped and 2 straight blades per rotor
- 1,000 RPM upgrade
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP GM SERIES 3 ROTOR SLASHERS 3M, 150HP GEARBOX

Heavy duty slashers designed for tough conditions.
Features:
- Fitted with solid rubber tyres. Puncture proofing is available.
- Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
- Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
- Front and rear chains can be fitted on request.
- Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 3.5m
Weight 975kg
Width (overall) 3.72m
Body construction: 5mm top, 6mm sides
Tractor HP range 70HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540rpm
Centre Gearbox 110HP
End Gearboxes 75HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

10ft (3m) Pasture Toppers with 75HP centre gearbox & 45HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 45hp end gearboxes and connected by a 75hp centre gearbox. Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 45HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

The fully galvanised Sabre slasher is built tough in Australia with a strong 5mm pressed deck, floating headstock, friction clutch, adjustable skids and front and rear chainguards. The ideal slasher to suit your compact tractor.
Features:
Suits 18-40HP tractors
SABRE range of offsettable rotary slashers
5mm galvanized deck
Cat 1
Adjustable skids
Floating top link
PTO driveshaft
Friction clutch
Front & rear chain guards
Gearbox available in red or yellow.
Specifications:
Overall width: 1.2m
Cutting width: 1.1m (3'6")
Weight: 180kg
HP: 18-40
Finish: Galvanised deck
Options:
- Combination Friction and Overrun Clutch
- 50HP Gearbox Option (50HP standard on SBR18-500)
- Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP

Silvan 1.5m (5ft) Heavy Duty Slasher with 100HP gearbox.
Suited to large acreage applications including clearance, firebreaks, private roadsides or where major cutting & cleaning is required.
Features:
- Construction: welded 6mm top deck plate, welded steel side plates with adjustable skids.
- Gearbox: 100HP Series 8, 1:1.93 ratio.
- PTO Shaft Rating: 540RPM
- Head Stock: Collapsible floating hitch.
- Finish: Long lasting galvanized top deck.
- Skids: Adjustable from 50-150mm cutting height.
- Blades: 3 leaf spring steel rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat. II TPL centre mount attachment.
- Clutch: 8" 2 plate friction clutch.
- Instructions: Operators manual and holder supplied.
- Chain Guards: Front and rear chain guards
Specifications:
- Connection Type: Linkage
- Working Width (mm): 1500
- Overall Width (mm): 1,600
- Cutting Height (mm): 50-150
- Overall Height (mm): 1,020
- Product Weight (kg): 376
Options:
103WRSHC2 - Height Control Wheel (2 recommended for 7' models)
131RSHC2 - Heavy Duty Height Control Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1.5M (100HP GEARBOX) - INCL ROTOR & CHAIN GUARDS - HEAVY DUTY SLASHER

Silvan General Purpose Slasher - 1.07m (3ft 6 inch)
Suits 18-40 HP
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 18-40 HP
- Working Width (mm): 1070
- Product Weight (kg): 151
Options Available:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.07M 102 GENERAL PURPOSE SLASHER (SUIT 18-40HP)

3m Pasture Toppers - 0116
75HP centre gearbox
75HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 75hp end gearboxes and connected by a 75hp centre gearbox.
Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 75HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
LED light kit
Full width walking axle
Full width front & rear safety chains
Heavy duty industrial tyres (wide)
Premium long life shaft drive
Universal drawbar for high or low towing
Adjustable levelling tie bars
Hydraulic wing lift and support
Mechanical wing float support
Full length side skids
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

The fully galvanised Sabre slasher is built tough in Australia with a strong 5mm pressed deck, floating headstock, friction clutch, adjustable skids and front and rear chainguards. The ideal slasher to suit your compact tractor.
Features:
Suits 20-40 HP tractors
SABRE range of offsettable rotary slashers
5mm galvanized deck
Cat 1
Adjustable skids
Floating top link
PTO driveshaft
Friction clutch
Front & rear chain guards
Gearbox available in red or yellow.
Specifications:
Overall width: 1.5m
Cutting width: 1.4m (4'6")
Weight: 250kg
HP: 20-40
Finish: Galvanised deck
Options:
Combination Friction and Overrun Clutch
50HP Gearbox Option (50HP standard on SBR18-500)
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP SABRE SERIES SLASHERS 1.5M - GALVANISED DECK, SUIT 20-40HP

Rhino Apex 3150 Series Flex Wing Slasher 4.5m Rhino 3150
Features
4.5m (15) cutting widths
160hp gearboxes
Farm Use
General Mowing
Pasture Maintenance
Roadside Mowing
Shredding Stalks
Smooth top design for easy cleaning of deck
Standard 540 RPM (1000 RPM available)
Weight 2,355kg
Painted finish
Unique Blade Pan Carrier Strong and durable stump jumper. Creates excellent airflow
LED Light Kit Standard
Pivot hitch unique locking clevis device for ease of hooking up
Independent suspension
Safety cover
Applications:
- Farm use
- General mowing
- Pasture maintenance
- Roadside mowing
- Shredding stalks
Specifications:
Cutting Width - 15'
Transport Width - 96" (dependent on tyre size)
Transport Height - 80" (dependent on tyre size)
Overall Width - 187" (dependent on tyre size)
Overall Length - 183" (dependent on tyre size)
Cutting Height - 2"-14" (dependent on tyre size)
Self-Levelling Height Adjustment - Hydraulic Cylinder
Jack Stand - Std
Hitch - Pull
Blade Carrier - Infinity - Cast
Blades - 1/2" x 4" Parallel Lift
Blade Overlap - 6"
PTO Horsepower Required - 50HP
Gearbox Rating - Divider: 160HP, Centre & Wing: 130HP
Output Shaft Diameter - 2"
Blade Tip Speed - Centre 540RPM: 14,861FPM, Centre 1000RPM: 15,570FPM, Wing 540RPM: 14,861FPM, Wing 1000RPM: 15,776FPM
Cutting Capacity (Diameter) - 3"
Driveline Size - Main: CAT 5 CV TR, Wing: CAT 4
Driveline Protection - Slip Clutch
Deck Thickness - 10 Ga
Side Skirt - 1/4"
Tyres & Wheels - See Tyre Section
Wing Lift Hydraulics - Std
Wing Flex (Degrees) - 90° Up/25° Down
Operational Wing Flex (Degrees) - 90° Up/25° Down
Safety Tow Chain - Std
Safety Deflectors - Rubber Deflectors or Chain Guard
Weight (Approx) - 2354kg
Tongue Weight - 730kg
Tyre Options:
RhinoTrax
- Best overall performance
- All-new material
- Increased traction
- Flat-less operation
- One-piece 10mm rim for max strength
Foam Filled
- Long lifespan
- Flat-less option
- Better long-distance option
Laminated:
- Cost-effective option
- Good, short-distance option
- Better for flat terrain applications
Options:
3150-01 Orange Powder Coat
3150-03 Green Powder Coat
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RHINO APEX 3150 SERIES FLEX WING SLASHERS 4.5M - RHINO - 3150, 160HP GEARBOX

Find Slashers For Sale. Browse 137 Slashers listings from Farm Supplies Machinery & Equipment.

New & Used Slashers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

FIELDQUIP GM SERIES SLASHERS GM36-900 - MIN100HP

JOHN BERENDS HD200 SLASHERS 2M - 0110, 40-75HP

FIELDQUIP GM SERIES 3 ROTOR SLASHERS 3M, 150HP GEARBOX

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

FIELDQUIP SABRE SERIES SLASHER 1.2M - GALVANISED DECK, SUIT 18-40HP

SILVAN 1.5M (100HP GEARBOX) - INCL ROTOR & CHAIN GUARDS - HEAVY DUTY SLASHER

SILVAN 1.07M 102 GENERAL PURPOSE SLASHER (SUIT 18-40HP)

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

FIELDQUIP SABRE SERIES SLASHERS 1.5M - GALVANISED DECK, SUIT 20-40HP

RHINO APEX 3150 SERIES FLEX WING SLASHERS 4.5M - RHINO - 3150, 160HP GEARBOX

Farm Supplies Machinery & Equipment

Dealer Address