Farm Supplies Machinery & Equipment

Galvanised AES/135 Slasher - suitable for pasture slashing and light to medium regrowth.
Note: Picture shows painted model.
Features:
- 135cm /54 inch cutting width
- 40 HP gearbox
- Cat '1' (AES) clevis hitch 3 point linkage
- 4 series drive shaft with friction clutch.
- Laminated Bisalloy blade beam with offset suction lift blades for clean cutting.
- Adjustable side skids built-in blade trim.
- Body reinforcement layout eliminates entrapment of swath or water.
Optional extras:
- Chain top link
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 135CM ROTARY SLASHER (40HP) - AES SERIES

Painted AES/135 Slasher - suitable for pasture slashing and light to medium regrowth.
Features:
- 135cm /54 inch cutting width
- 40 HP gearbox
- Cat '1' (AES) clevis hitch 3 point linkage
- 4 series drive shaft with friction clutch.
- Laminated Bisalloy blade beam with offset suction lift blades for clean cutting.
- Adjustable side skids built-in blade trim.
- Body reinforcement layout eliminates entrapment of swath or water.
Optional extras:
- Slasher galvanised (4WAES135-G)
- Chain top link
- Chain guard front in lieu of rubber
- Chain guard rear in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 135CM ROTARY SLASHER (40HP) - AES SERIES

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 360cm cutting width
- Italian manufactured high ratio gearbox (120HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- LH & RH discharge chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS360STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM PAINTED 360CM SIDE DISCHARGE ROTARY SLASHER (120HP) - ACS-STS SERIES

The Major CS Pro is a multi-purpose mower, designed for the maintenance of dense vegetation, long grass, estate lawns and fine turf.
The patented double-chop blade system requires less HP than a comparable width flail mower.
High performance Strenx 700 MC structural steel makes these mowers strong and ensures a long wear life.
Specifications
Model MJ65-150 MJ65-150F
Working Width 1.45m (4 9) 1.45m (4 9)
Transport Width 1.56m (5 2) 1.56m (5 2)
Power (HP) 20 HP 20 HP
PTO rpm 540 1000
Cutting Height 10-85mm 10-85mm
Rotors 2 2
Blades 4 4
Weight 290kg 310kg
Blade tip speed 82 m/s
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR MJ65-150 - COMPACT TWIN ROTOR SLASHER- SUIT 20 HP

Jarrett Silverback Series Slasher 1.8m.
Cat I Tower, Hi- speed gearbox, 4mm body and 4mm front and rear apron.
A quality lifestyle slasher range specifically designed for the smaller tractor, smaller acreage farmer who wants features, style and reliability.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris
- Unique clean-top design - Makes cleaning a breeze. 3-degree centre-to-front/back slope adds to the ease of keeping debris and water off
- Full length profiled side plates- Adds strength to the slasher body
- Hotdip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and chain backtays - Allows the slasher to follow the ground contour.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock mounting - The tower headstock is held securely by a clevis mounting bracket.
- Reinforced headstock mounting gussets - Hidden inside the body design and combined with the strong body sheet to ensure a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 4
Total width (mm) - 1840
Cutting width (mm) - 1700
Total weight (kg) -380
Gearbox hp/(kw)- 50/(37)
Drive Shaft Series - S4
Clutch Diameter (mm) - 150 Blue Torque
Tip Speed ft/min/(m/s) - 19, 600(100)
Options:
- Rear Chain curtain in lieu of rubber
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS SILVERBACK SERIES SLASHER 1.8M CAT 1 - 40HP - SB-180

The Major Trailed Topper is a fully offset gear driven machine.
It is offset for working and is folded into transport position hydraulically from the tractor seat.
The rotors are timed with each other and have an overlap of 3 inches (75mm). The blades rotate in opposite directions to each other and spread the cut grass evenly behind the machine. As the machine is fully offset there is no trampling of the pasture prior to cutting.
The cutting height is set at the desired level by moving the adjustable side skids to the appropriate position. There is a limit stop on the ram which controls the rear axle.
Features:
Full hydraulic offset control
Hydraulic breakaway system
Wide angle PTO shaft
Twin-cut ProCut swinging blades
Model:
MJ45-360 3.6m (12ft) 1,240 kg 40-120HP 3 Rotors 50-205mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR TRAILED OFFSET TOPPER SERIES - 3.6M - 12FTGDW-HD, 40-120HP

Southern Cross 4ft Slasher - 18-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.0mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 45HP gearbox. Gearbox supplied with oil (85/140 Gear Oil)
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Centre mount
- Front and rear discharge deflectors (chain)
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Structural integrity located under deck with no impact on material flow
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Specifications:
- Recommended Tractor (HP) - 18-45
- Cutting Width (mm) - 1160
- Overall Width (mm) - 1350
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360 X 12.7mm (Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 66
- Deck Thickness (mm) - 3.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 215kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT SLASHER, SUIT 18-45HP

Jarrett Redback Series Slasher 2.1m -100hp
- Lo-speed gearbox, centre/offset.
- 6mm body and 6mm front and rear apron.
- 6mm x 250 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 2200
Cutting width (mm) - 2100
Total weight (kg) -660
Gearbox hp/(kw)- 100/(75)
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 17,300(88)
Options:
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 100HP - RB7-100

Slasher - 3pt Linkage - 1,500 mm wide- twin blade- dual rotation single cutting bar - flow 35-80 LPM.
Price inclusions: slasher, pins, hoses & couplers - excludes 3pt linkage mount.
Also available in 1800mm width.
The 3pt Linkage Slasher is a slashing attachment for tractors that can be used for the effective cutting and clearing of grass and low ground shrubbery.
Hydraulically driven models are available to fit all CAT 1 and CAT 2 Tractors and come complete with hoses, couplers and 3pt Linkage.
Ideal for landscaping, agriculture, roadway maintenance, parks maintenance and general slashing.
Features:
- Twin blade, dual rotation, single cutting bar
- Two widths available: 1500mm (59') and 1800mm (70')
- Chain curtain for debris suppression
- Adjustable height 40mm - 140mm
- Optional jockey wheel available
- Heavy duty construction - built for Australian conditions
- Rounded side skids for smoother manoeuvrability over
uneven terrain.
Specifications:
- Weight: 370kg
- Length: 1860mm
- Width: 1630mm
- Height: 605-705mm
- Max Pressure: 240 bar
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA SLASHER 3PT LINKAGE-1500MM WIDE- TWIN BLADE- SL-000103

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 240cm cutting width
- Italian manufactured high ratio gearbox (80HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS240STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 240CM SIDE DISCHARGE ROTARY SLASHE (80HP) - ACS-STS SERIES

Southern Cross 6ft Slasher - 50-75hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 4mm deck
- Height adjustable skids with five different cuttings heights
- 75HP Bare-Co gearbox
- Bare-Co 8 inch slip clutch
- Bare-Co Series 6 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount
- High tensile chains for durability
- Braced platforms for maximum strength
- 3 Year Gearbox Warranty
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (two wheel kits are recommended for the
6ft slasher)
Specifications:
- Recommended Tractor (HP) - 50-75
- Cutting Width (mm) - 1750
- Overall Width (mm) - 1870
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - 360x12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 4.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/75HP
- PTO Driveline - Bare-CO Series 6 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 8" Slip-clutch included
- Gross Weight - 436kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT SLASHER-SUIT 50-75HP

Jarrett Redback Series Slasher 2.1m -150hp
- Gearbox, centre - RHS tower
- 6mm body and 6mm front and rear apron.
- 6mm x 250 deep skids, double gusset
- 3 blade disc base
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 2200
Cutting width (mm) - 2100
Gearbox hp/(kw)- 150
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 17,300(88)
Options:
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 150HP - RB7-130

Find Slashers For Sale. Browse 142 Slashers listings from Farm Supplies Machinery & Equipment.

New & Used Slashers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

AGRIFARM GALVANISED 135CM ROTARY SLASHER (40HP) - AES SERIES

AGRIFARM PAINTED 135CM ROTARY SLASHER (40HP) - AES SERIES

AGRIFARM PAINTED 360CM SIDE DISCHARGE ROTARY SLASHER (120HP) - ACS-STS SERIES

MAJOR MJ65-150 - COMPACT TWIN ROTOR SLASHER- SUIT 20 HP

JARRETT IMPLEMENTS SILVERBACK SERIES SLASHER 1.8M CAT 1 - 40HP - SB-180

MAJOR TRAILED OFFSET TOPPER SERIES - 3.6M - 12FTGDW-HD, 40-120HP

SOUTHERN CROSS AG MACHINERY 4FT SLASHER, SUIT 18-45HP

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 100HP - RB7-100

DIGGA SLASHER 3PT LINKAGE-1500MM WIDE- TWIN BLADE- SL-000103

AGRIFARM PAINTED 240CM SIDE DISCHARGE ROTARY SLASHE (80HP) - ACS-STS SERIES

SOUTHERN CROSS AG MACHINERY 6FT SLASHER-SUIT 50-75HP

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 2.1M - 150HP - RB7-130

Farm Supplies Machinery & Equipment

Dealer Address