Farm Supplies Machinery & Equipment

3m Pasture Toppers - 0116
75HP centre gearbox
75HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 75hp end gearboxes and connected by a 75hp centre gearbox.
Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 75HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

Silvan 102 General Purpose Slasher - 1.5m (5ft)
Suit 30-40 HP. 102RS5
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 30-40 HP
- Working Width (mm): 1500
- Product Weight (kg): 258
Options:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

Silvan 108 Medium Duty Slasher - 1.8m (6ft).
75HP Gearbox
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a medium HP tractor.
Features:
- Construction: 5mm top deck plate, downfolds on each side, steel understructure.
- Gearbox: 75HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 75HP, series 6 with integral clutch.
-Head Stock: Collapsible floating hitch.
- Clutch: 8in 2 plate friction clutch.
- Finish: Long lasting galvanized top deck.
- Skids: Adjustable from 20 80mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron twist lift blades.
- Mounting: Cat I & II TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front and rear chain guards.
Specifications:
- Working Width (mm): 1778
- Product Weight (kg): 397
Options:
- Height Control Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.8M 108 MEDIUM DUTY GALVANISED SLASHER (75HP)

10ft (3m) Pasture Toppers with 75HP centre gearbox & 45HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 45hp end gearboxes and connected by a 75hp centre gearbox. Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 45HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

A robust medium duty slasher to suit small to medium size tractors. Australian made using high quality European components. Excellent value for money.
Features:
Body designed to take real punishment. 3mm top plate and strong 6mm thick side panels prevent denting.
Bondioli & Pavesi Series 4 pto driveshaft with 2 plate slip clutch protects slasher and tractor. Optional over-run clutch to suit tractors with single stage clutch.
40 HP oil lubricated Comer gearbox. Optional Italian manufactured gearbox upgrade.
Hardened and tempered stepped/bushed slasher blades.
Available in 5 widths with dual mounting (centre or offset).
Floating headstock for working on undulating ground.
Optional pneumatic wheelkits available for depth control.
Fitted with front and rear chain guards.
Cat 1/2 linkage.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Centre Mount
Cutting Width 1030mm
Overall Width 1120mm
Overall Length 1120mm
Tractor HP 18-30
Cutting Height 25-100mm
Weight 185kg
Options:
1588UG Italian Manufactured 40HP Gearbox Upgrade
0065 EP Slasher Wheel Kit (Pneumatic Wheel)
0148 Additonal over-run clutch (suits tractors with single stage clutch)
0051GAL EP100 with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EP100 MEDIUM DUTY SLASHERS 1M - 0051- 18-30HP

A light duty dual mount slasher for grass and light work. Ideal for compact tractors. Front and rear stone guarding as standard.
Features:
Body designed with 3mm top plate and strong 6mm thick adjustable skids.
Italian made Bondioli & Pavesi Series 2 pto driveshaft with shearbolt protection rated at 900NM. Optional 2 plate slip clutch with Series 4 shaft. (The clutch is standard on the TA135 and TA150 models).
Cat 1 linkage with both offset and centre mount positions.
Hardened and tempered stepped/bushed slasher blades.
Standard with full length hinging rear steel stone flap and front rubber guard.
Adjustable skids have cutting height range of 25 100mm.
40 HP oil lubricated gearbox.
Floating headstock.
Document holder fitted.
Full 12 month warranty on design and manufacture.
Specifications:
Cutting Width 1360mm
Overall Width 1460mm
Overall Length 1470mm
Tractor HP 25-45
Cutting Height 25-100mm
Weight 225kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TA135 LIGHT DUTY SLASHERS 1.35M - 0349, 40HP

Heavy duty slashers designed for tough conditions.
Features:
- Fitted with solid rubber tyres. Puncture proofing is available.
- Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
- Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
- Front and rear chains can be fitted on request.
- Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 3.5m
Weight 975kg
Width (overall) 3.72m
Body construction: 5mm top, 6mm sides
Tractor HP range 70HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540rpm
Centre Gearbox 110HP
End Gearboxes 75HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

8ft Twin Rotor Slasher (Galvanised) - suit 70-100hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Bare-Co components are readily available from all good machinery dealer outlets located Australia wide
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 6mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 100 HP Centre gearbox.
- Bare-Co 75 HP Outer gearboxes.
- 2 Year Gearbox Warranty
- Bare-Co slip clutch
- Bare-Co Series 8 PTO shaft
- Front and rear safety chains
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on
material flow
- Bare-Co gearbox/slip clutch safety guarding
- Reinforced A-frame for strength and functionality
- Optional wheel kits available (two-wheel kits are recommended for the 8ft slasher)
Specifications:
- Recommended Tractor (HP) - 70-100
- Cutting Width (mm) - 2,400
- Overall Width (mm) - 2,690
- Approx weight = 980 kg
- Number of Blades - x4 - LH Suction Lift style approx 2.62 kg (each)
- Blade Tip Speed (m/s max.) - 99
- Deck Thickness (mm) - 6
- 3-Point Hitch - Category Two
- Gear Box / Capacity - Bare-Co 1:1.93 / 100HP
- Bare-Co 100HP slipclutch & series 8 PTO shaft
- Grass Discharge - Rear Discharge
- Blade Carrier - Cutter Bar
- Optional Wheel Kit(s) - Twin kit available
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 8FT TWIN ROTOR GALVANISED SLASHER, SUIT 70-100HP

XHD Series Slashers. 1.8m, min 50HP.
Features:
150 HP 540 rpm high-speed gearbox
Multi-plate, asbestos free, brass impregnated friction clutch
Heavy duty monocoque pressed 6mm deck plate
Clean body lines to minimise grass build up
Hot dipped galvanised deck
Pivoting headstock with chain backstays
Adjustable height, high clearance skids
Heavy duty spring steel blade carrier
Heavy duty swing back lift blades
Front and rear chain guards
Adjustable height castor wheels
Painted components finished in high quality durable two pack polyurethane
Painted components available in red or green.
Specifications:
Working width: 1.8m (6')
Weight: 700kg
HP: 50
Finish: Galvanised deck
Options:
4 Blade
Offset 200 mm to the right
Sign Rack
Tool Box
Support Legs
Hydraulic Fan
Rear Lights
Extra Wheel kit for XHD-72
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP

A robust medium duty slasher to suit small to medium size tractors. Australian made using high quality European components. Excellent value for money.
Features:
Body designed to take real punishment. 3mm top plate and strong 6mm thick side panels prevent denting.
Bondioli & Pavesi Series 4 pto driveshaft with 2 plate slip clutch protects slasher and tractor. Optional over-run clutch to suit tractors with single stage clutch.
40 HP oil lubricated Comer gearbox. Optional Italian manufactured gearbox upgrade.
Hardened and tempered stepped/bushed slasher blades.
Available in 5 widths with dual mounting (centre or offset).
Floating headstock for working on undualting ground.
Optional pneumatic wheelkits available for depth control.
Fitted with front and rear chain guards.
Cat 1/2 linkage.
Optional galvanising available.
Full 12 month warranty on design and manufacture.
Specifications:
Dual Mount
Cutting Width 1360mm
Overall Width 1460mm
Overall Length 1470mm
Tractor HP 25-45
Cutting Height 25-100mm
Weight 230kg
Options:
1588UG Italian Manufactured 40HP Gearbox Upgrade
0065 EP Slasher Wheel Kit (Pneumatic Wheel)
0148 Additional over-run clutch (suits tractors with single stage clutch)
0061GAL EP135 with Galvanised Deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EP135 MEDIUM DUTY SLASHERS 1.35M 0061- 25-45HP

XLE Series Slasher. 1.8m, suits 60-100 HP - Australian Made
Specifications:
Working width: 1.8m (6')
Weight: 430kg
HP: 60-100
Finish: Galvanised Deck.
Features:
5mm galvanized deck.
Suits 60-100 HP tractors.
Cat I & II.
Adjustable skids.
Pivoting headstock with chain backstays.
PTO driveshaft.
Friction clutch.
Front and rear chain guards.
Gearbox available in red or yellow.
Optional Extras:
Wheelkit (adjustable)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP XLE SERIES SLASHERS 1.8M - SUIT 60-100HP

The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 75hp end gearboxes and connected by a 75hp centre gearbox. Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment. 14 inch Holden wheels are optional for depth control.
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (with adj skids) 25-100mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 75HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3M PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

Find Slashers For Sale. Browse 142 Slashers listings from Farm Supplies Machinery & Equipment.

New & Used Slashers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

SILVAN 1.8M 108 MEDIUM DUTY GALVANISED SLASHER (75HP)

JOHN BERENDS 10FT PASTURE TOPPERS 75/45HP - 0115, MIN 35+HP

JOHN BERENDS EP100 MEDIUM DUTY SLASHERS 1M - 0051- 18-30HP

JOHN BERENDS TA135 LIGHT DUTY SLASHERS 1.35M - 0349, 40HP

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

SOUTHERN CROSS AG MACHINERY 8FT TWIN ROTOR GALVANISED SLASHER, SUIT 70-100HP

FIELDQUIP XHD SERIES SLASHERS 1.8M - MIN 50HP

JOHN BERENDS EP135 MEDIUM DUTY SLASHERS 1.35M 0061- 25-45HP

FIELDQUIP XLE SERIES SLASHERS 1.8M - SUIT 60-100HP

JOHN BERENDS 3M PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

Farm Supplies Machinery & Equipment

Dealer Address