Farm Supplies Machinery & Equipment

This professional range for tractors of up to 220 hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patened removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 250 MULCHER WITH HYDRAULIC SIDE SHIFT

Professional compact tractors. Tractors up to 75hp require efficient, versatile and robust flail mulchers to carry out mowing and mulching work reliably, quickly and economically.
At the same time the equipment should be light so as not to restrict the scope of the system vehicles.
The MU-E mulcher series was created for this range of tractors. A range of options, additional equipment, low weight and strong construction are the typical attributes of this versatile range of mulchers.
Features:
Manufactured from High Quality QST/E Steel
Headstock Cat. I + II for Rear mounting
Mountable in two positions variable by 30cm (Offset)
Gearbox with integrated over run clutch and through drive 540 RPM. or 1000 RPM
Belt protection with tension measuring slot
Stand
High tempered M Hammer flails
Smooth running Spiral rotor with specially formed lugs
Patented removable shredding bar System: Shark Fin
Roller to carry the flail, adjustable for different heights
High tempered spring steel one way protection flaps in front of the mower
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
P.T.O. shaft and Guarding to ISO Standards
Independently tested and certified for Thrown Objects.
Options:
Modification 540 to 1000 RPM (+ labour charge)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING ECOTOP 160 MULCHER (OFFSET 16CM) SUITS 30-75HP

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 195cm cutting width
- European gearbox (40HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

This range of mulcher is ideal for all mowing and mulching with small and compact tractors of 12 to 35 hp from cutting fine lawns to high grass or light vegetation. The MU-C mulchers display their overall versatility, their good cutting and mulching quality and their robust construction.
Features:
Manufactured from High Quality QSt/E Steel with centre mounted Cat. I Headstock for rear mounting.
Rear mounting: Gearbox with integrated over run clutch for 540 / 1000 r.p.m. (distance of the ground to P.T.O. shaft cc. 50 cm).
Front mounting: Low positioned gearbox with integrated over run clutch for 1000 r.p.m. (2000 r.p.m. possible as option) (distance of the ground to P.T.O. shaft cc. 25 cm).
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
High tempered spring steel one way protection flaps in front of the mower hood.
Skids
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Options:
2 point Linkage parts to original mower deck linkages for Front Mowers (Iseki SF 230 etc.) instead of Head Stock Cat.I (only for MU-C 100 and
MU-C 120 available).
Special Carbide wearing skids, removable (Rear mounting only).
Height adjustable rubber wheels, 360º swivel in front of the mulcher.
Hydraulic Weight Transfer MU-SOFA, for Front mounting recommended.
Mount for municipal quick-coupling triangle (installed on implement) for front mounting.
3-point trestle (Cat 1) Alpine for converting rear-mounted MU-C to front mounting for carrier vehicles, 540 rpm or 1000 rpm (MU-C 140-160)
Linkage parts for Shibaura CM 214
Modification to different RPM
Second screw-type short chopping bar system with "shark fin" design-a Muthing patent (only for front mounting)
Hood wear plate (factory mounted)
Models:
MU-C080 WW-800mm Overall width-970mm Max hp-35 Weight 140kg Flails 12
MU-C100 WW-1000mm Overall width-1170mm Max hp-35 Weight 160kg Flails 16
MU-C120 WW-1200mm Overall width-1370mm Max hp-35 Weight 180kg Flails 20
MU-C140 WW-1400mm Overall width-1570mm Max hp-35 Weight 200kg Flails 24
MU-C160 WW-1600mm Overall width-1770mm Max hp-35 Weight 220kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 160CM MULCHER SUITS UP TO 35HP MU-C160

This heavy duty professional range for tractors of up to 220hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QST/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 RPM.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patented removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 320 MULCHER INC HYDRAULIC SIDE SHIFT

The MU-FM professional flail mower with linkages for various outfront mowers was developed especially for this purpose.
The two point linkage in connection with the front wheels means that even on uneven land the mulcher can be driven precisely, close to the ground and with a uniform cutting height by virtue of the continuously variable height adjustment of the support roller.
Features:
Manufactured from High Quality QSt/E Steel for Front mounting onto professional Front Mowers with 2 point linkage.
Linkage designed for high lift to clear kerbs.
Gearbox mounted to the rear of the hood complete with integrated over run clutch for 2500 r.p.m.
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
Easy to use variable height adjustment.
Wearing skids.
High tempered spring steel one way protection flaps in front of the mower.
Optimised distance between the outer rotor circle and the roller as well as the linkage parts with wide swivelling range guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and a removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Implement triangle for Tora GM 360 with Quick-Attached-System, left side 1"Z15-additional charge
Headstock with municipal coupling triangle - additional charge
Headstock with A frame Cat.1 N-additional charge
PTO shaft GE 2105 for Grillo,25x22 14-spline-additional charge
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller (only MU-FM 140-160) Additional Charge
Models:
MU-FM 140-31-1-2 WW 1400mm Overall width 1650mm Max hp 40 Weight 220kg Flails 24
MU-FM 160-31-1-2 WW 1600mm Overall width 1850mm Max hp 40 Weight 240kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 160CM MULCHER - SUITS < 40HP - MU-FM160-31-1-2

This heavy duty professional range for tractors of up to 120 hp with side shift and front (or rear) mounting is the entry level to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-L Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat.
I + II for Front or Rear mounting with mechanical side shift;
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar.
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standard
Carbide wearing skids (removable).
Adjustable Vario Intake Bar - cutting bar.
Options:
Hydraulic side shift (56cm lifting range).
Shock absorbing linkage springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modifications of r.p.m /rotation direction.
Rotor with triple Y-blades (additional charge).
Rotor with m shackle flails (additional charge).
Scraper bar for displaced support roller MU-L Vario.
Second Patented removable shredding bar system "Shark Fin".
Hood wear plate (Factory mounted).
Model:
MU-L 180 1800mm 120 HP WW 1800mm Overall width 1970mm Weight 530kg Flails 16
MU-L 200 2000mm 120 HP WW 2000mm Overall width 2170mm Weight 570kg Flails 16
MU-L 220 2200mm 120 HP WW 2200mm Overall width 2370mm Weight 610kg Flails 18
MU-L 250 2500mm 120 HP WW 2500mm Overall width 2670mm Weight 670kg Flails 22
MU-L 280 2800mm 120 HP WW 2800mm Overall width 2970mm Weight 790kg Flails 24
As shown in illustration - MUL 180 280: 56 cm.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-L VARIO 250 MULCHER - SUITS 45-120HP (FRONT OR REAR MOUNT)

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 RPM.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 250 MULCHER FRONT OR REAR MOUNTING

The Minos Agri TDSP Flail Mower/Mulcher is suitable for topping Grass, Orchards, Vineyards and general mulching use and is a rear tractor mount implement with 3 point linkage, driven by a 540rpm tractor PTO.
Working widths available from 1200mm to 2600mm. Utilises a heavy duty rotor with hammers, heavy duty body, rear rakes and an adjustable rear roller that combined helps to preserve cutting height, blade strength and balance even on uneven soil.
Specifications:
Working Width: 1850 mm
Overall Width: 2040 mm
Overall Length: 1100 mm
Overall Height: 1050 mm
Number Of Blades: 20
Machine Weight: 680 kg
PTO: 540 rpm
Required Power: 55 HP
Options:
Hydraulic Offset (included in this model)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI TDSPH-1850, HYDRAULIC OFFSET MULCHER

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

The Minos Agri TDSP Flail Mower/Mulcher is suitable for topping Grass, Orchards, Vineyards and general mulching use and is a rear tractor mount implement with 3 point linkage, driven by a 540rpm tractor PTO.
Working widths available from 1200mm to 2600mm. Utilises a heavy duty rotor with hammers, heavy duty body, rear rakes and an adjustable rear roller that combined helps to preserve cutting height, blade strength and balance even on uneven soil.
Specifications:
Working Width: 2600 mm
Overall Width: 2796 mm
Overall Length: 1275 mm
Overall Height: 900 mm
Number Of Blades: 28
Machine Weight: 800 kg
PTO: 540 rpm
Required Power: 60-70 HP
Options:
Hydraulic Offset
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI TDSP-2600 FLAIL MULCHER

Find Mulchers For Sale. Browse 241 Mulchers listings from Farm Supplies Machinery & Equipment.

New & Used Mulchers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-PRO 250 MULCHER WITH HYDRAULIC SIDE SHIFT

MUTHING ECOTOP 160 MULCHER (OFFSET 16CM) SUITS 30-75HP

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

MUTHING 160CM MULCHER SUITS UP TO 35HP MU-C160

MUTHING MU-PRO 320 MULCHER INC HYDRAULIC SIDE SHIFT

MUTHING 160CM MULCHER - SUITS < 40HP - MU-FM160-31-1-2

MUTHING MU-L VARIO 250 MULCHER - SUITS 45-120HP (FRONT OR REAR MOUNT)

MUTHING MU-O 250 MULCHER FRONT OR REAR MOUNTING

MINOS AGRI TDSPH-1850, HYDRAULIC OFFSET MULCHER

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

MINOS AGRI TDSP-2600 FLAIL MULCHER

Farm Supplies Machinery & Equipment

Dealer Address