Farm Supplies Machinery & Equipment

AHM/160-SP Sweet Potato Mulcher series
160cm cutting width
Features:
- European Gearbox (50HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- Centrally mounted 3PLPark stands x 4 for storage
- Tine brackets on rear frame tube 850mm centres
- Tines lase cut out of Bisalloy 400, 75x20mm section, 1500mm long with 10 adjusting holes
- Short Y blades over row.
Options:
- Hammers in lieu of Y blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM SWEET POTATO MULCHER AHM SERIES 160CM (50+HP REQ) - AM/160-SP

Forest AHM Mulcher - 160cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
The Forestry model is suitable for scrub clearing, forest trails and under powerline regrowth control.
These models are also fitted with a heavy duty Rotor and additional body panels
Mulchers for Forestry models are available in 3 sizes: AHM160-F, 195-F & 240-F
Features:
- Double skin steel body panels to withstand obstacle impact.
- European gearbox (70HP)
- Clevis hitch cat 1&2 three point linkage.
-4 x SPBX Section belt rotor drive on large diameter pulleys for optimum blade tip speed.
- Series 7 drive shaft with friction clutch.
- Floating top link.
- 220mm (9) diameter rotor tube with 6 row blade configuration to reduce power requirements and even out belt loadings.
- Blades pivoting on hardened bushes and grade 8 bolts.
- 55mm taper lock rotor support bearings.
- Fully adjustable rear flap to control swath spread.
- Adjustable height skids.
- 1000 PTO Kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM FOREST MULCHER AHM SERIES -160CM (70+HP) - AHM/160-F

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush.
It is ideal for the clearance of arable stubble, maize and rapeseed crops.
Strenx 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing.
The undersole discs are produced from Hardox 450, a wear and abrasion resistant steel.
An optional side shift unit is available which allows the operator.
Features:
Can be front or rear mounted (to be specified when ordering)
Patented blender double chop blade system
25 percent less power and fuel consumption required than a similar sized flail machine Impact shock reducing swinging hardened spring steel blades
Low maintenance machine with less wearing parts than a flail mower
Heavy duty rear roller
Model:
MJ30-420 - 4.20m (13ft 9in) - 1,265 kg - 90-150HP - 6 Rotors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - DOUBLE WING : 100-150HP

The Nobili BE Series is best suited to medium horsepower tractors up to 65HP with the option of front or rear tractor mount and cutting height maintained by the rear roller (including reversible cab tractors).
Suggested Use: Grass mowing and green pruning's up to 40mm in diameter.
Construction: Low profile body, no opening tailboard.
Control: Two position fixed headstock or optional hydraulic side shift.
Driveline: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive (drive from both ends) and electronically balanced rotor.
Attachment: Cat. I three point linkage (BE14, BE16), Cat I/II three point linkage (BE18, BE20). Floating top link included.
Height Control: Roller standard.
Model Working Width Tractor HP Weight
BE14/06 1400mm 35 - 65 HP 335 kg
BE16/06 1600mm 39 - 65 HP 370 kg
BE18/06 1800mm 42 - 65 HP 410 kg
BE20/06 2000mm 44 - 65 HP 450 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.4M BE MULCHER (UP TO 65HP) FRONT OR REAR MOUNT

This range of mulcher is ideal for all mowing and mulching with small and compact tractors of 12 to 35 hp from cutting fine lawns to high grass or light vegetation.
The MU-C mulchers display their overall versatility, their good cutting and mulching quality and their robust construction.
Features:
Manufactured from High Quality QSt/E Steel with centre mounted Cat. I Headstock for rear mounting.
Rear mounting: Gearbox with integrated over run clutch for 540 / 1000 r.p.m. (distance of the ground to P.T.O. shaft cc. 50 cm).
Front mounting: Low positioned gearbox with integrated over run clutch for 1000 r.p.m. (2000 r.p.m. possible as option) (distance of the ground to P.T.O.shaft cc. 25 cm).
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
High tempered spring steel one way protection flaps in front of the mower hood.
Skids
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Options:
2 point Linkage parts to original mower deck linkages for Front Mowers (Iseki SF 230 etc.) instead of Head Stock Cat.I (only for MU-C 100 and MU-C 120 available).
Special Carbide wearing skids, removable (Rear mounting only).
Height adjustable rubber wheels, 360º swivel in front of the mulcher.
Hydraulic Weight Transfer MU-SOFA, for Front mounting recommended.
Mount for municipal quick-coupling triangle (installed on implement) for front mounting.
3-point trestle (Cat 1) Alpine for converting rear-mounted MU-C to front mounting for carrier vehicles, 540 rpm or 1000 rpm (MU-C 140-160)
Linkage parts for Shibaura CM 214
Modification to different RPM
Second screw-type short chopping bar system with "shark fin" design-a Muthing patent (only for front mounting)
Hood wear plate (factory mounted)
Models:
MU-C080 WW-800mm Overall width-970mm Max hp-35 Weight 140kg Flails 12
MU-C100 WW-1000mm Overall width-1170mm Max hp-35 Weight 160kg Flails 16
MU-C120 WW-1200mm Overall width-1370mm Max hp-35 Weight 180kg Flails 20
MU-C140 WW-1400mm Overall width-1570mm Max hp-35 Weight 200kg Flails 24
MU-C160 WW-1600mm Overall width-1770mm Max hp-35 Weight 220kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 80CM MULCHER SUITS UP TO 35HP MU-C080

Pineapple AHM Mulcher - 195cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Macadamia mulchers have 3 sizes, AHM160-M, 195-M & 240-M.
Features:
- European Gearbox (60HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- Centrally mounted .
- 55mm taper lock rotor support bearings.
- Rear height roller
- Mulching bar
- Hydraulic angling rear deflectors
- Deflection both LH & RH
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MACADAMIA MULCHER AHM SERIES - 195CM (60+HP REQ) - AHM/195-M

This professional range for tractors of up to 220 hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patened removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 250 MULCHER WITH HYDRAULIC SIDE SHIFT

Daken Flail mowers/mulchers are designed and built for light mulching. Suitable for light application on lawns and improved ground, standard with hammer type blades and rear roller.
Not recommended for clearing unimproved ground or medium to heavy growth.
Specifications:
Cut: 145cm
Blades: Hammer
Rear roller: yes
Skids: yes
Offset: manual
Weight: 210kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 145CM FLAIL MULCHER - 40015DC

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush.
It is ideal for the clearance of arable stubble, maize and rapeseed crops.
Strenx 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing.
The undersole discs are produced from Hardox 450, a wear and abrasion resistant steel.
An optional side shift unit is available which allows the operator.
Features:
Can be front or rear mounted (to be specified when ordering)
Patented blender double chop blade system
25 percent less power and fuel consumption required than a similar sized flail machine
Impact shock reducing swinging hardened spring steel blades
Low maintenance machine with less wearing parts than a flail mower
Heavy duty rear roller
Model:
MJ30-630 Double Wing 6.3m (20ft 8in) 1,875kg 140-190HP 9 Rotors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 6.3M MJ30 CYCLONE ROTARY SLASHER - DOUBLE WING : 140-190 HP

AHM Mulcher 160CM - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
- Wheat, Maize, Sorghum, Rice and Cotton stubble. - Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
- Prunings: Macadamia, Grapes, Banana plants & Avocados
- The Forestry model is suitable for scrub clearing, forest trails and under powerline regrowth control. These models are also fitted with a heavy duty Rotor and additional body panels
Features:
- 50HP
- Excavator Mount
- Double skin body construction
- Cast hammers pivoting on hardened bushes
- SPBX Section American V Belts
- Taperlock Rotor Bearings 55mm capacity
- 220mm diameter Rotor Tube
- Suitable for 12-20 ton excavators
- Requires minimum 100lt/min flow, minimum 200 bar pressure.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM EXCAVATOR MULCHER AHM HYDRAULIC 160CM (100+LPM)

Muratori Mulcher suitable for tractors up to 50HP. With hammer blades and rear roller.
Made in Italy.
Manual headstock off setting. "Y" blades also available for grass and vine pruning's.
All Mulchers are covered by Muratori 2 Year Warranty.
Standard equipment:
Square tube
3-point linkage
Cat.1
Driveline
Gearbox including overrun clutch
Additional reinforcing front frame
Counter-knives
Rear roller
Front protection flaps
Rear rubber protection flaps
2 Year Warranty
Models:
MT40 - 140- 138cm, 325kg, Max 40HP
MT40 - 170- 170cm, 362kg, Max 50HP
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN MURATORI 1.7M MULCHER SUITS 40-50HP (MT40 170)

This heavy duty professional range for tractors of up to 220hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QST/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 RPM.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patented removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 300 MULCHER INC HYDRAULIC SIDE SHIFT

Find Mulchers For Sale. Browse 260 Mulchers listings from Farm Supplies Machinery & Equipment.

New & Used Mulchers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

AGRIFARM SWEET POTATO MULCHER AHM SERIES 160CM (50+HP REQ) - AM/160-SP

AGRIFARM FOREST MULCHER AHM SERIES -160CM (70+HP) - AHM/160-F

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - DOUBLE WING : 100-150HP

NOBILI 1.4M BE MULCHER (UP TO 65HP) FRONT OR REAR MOUNT

MUTHING 80CM MULCHER SUITS UP TO 35HP MU-C080

AGRIFARM MACADAMIA MULCHER AHM SERIES - 195CM (60+HP REQ) - AHM/195-M

MUTHING MU-PRO 250 MULCHER WITH HYDRAULIC SIDE SHIFT

DAKEN 145CM FLAIL MULCHER - 40015DC

MAJOR 6.3M MJ30 CYCLONE ROTARY SLASHER - DOUBLE WING : 140-190 HP

AGRIFARM EXCAVATOR MULCHER AHM HYDRAULIC 160CM (100+LPM)

DAKEN MURATORI 1.7M MULCHER SUITS 40-50HP (MT40 170)

MUTHING MU-PRO 300 MULCHER INC HYDRAULIC SIDE SHIFT

Farm Supplies Machinery & Equipment

Dealer Address