Farm Supplies Machinery & Equipment

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
MJ30-720 Mulching Slasher with rear wheels ideal for macadamias (150-210hp)
7.2 metre working width
3PL
10 rotors
weight 2235KG
150-210HP
Ideal Macadamias, also stubble, pasture, solar farms
Twin wing - folding
Rear wheels in lieu of rollers
Mulch and slash
Model:MJ30-720WRW
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MAJOR 7.2M MJ30 MULCHING SLASHER INC REAR WHEELS 150-210HP

Multi purpose side shift mulcher, for tractors from 50-70hp.
Ideal for mowing grass, set-aside and medium size pruning's up to 50mm diameter.
Specifications:
Actual Width: 193cm
Working Width: 175cm
Required HP: 50-70hp
Weight: 510kg
No of Blades: 16
Features:
70hp Rated gearbox
Integrated over-run clutch
Fixed counter blades
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
Side shift by threaded bar (Hydraulic kit available see options)
540rpm PTO
Front protection flaps
Flat hammer flails
Options In Lieu of Standard:
Hydraulic ram kit for off set (in lieu of threaded bar)
Rear collection spikes (each) (125 = 9, 150 = 11, 175 = 13, 200 = 15)
Set of steering wheels in lieu of roller
Y flails in lieu of hammer flails
Models
VEGA/S125 125cm Working Width 40-70hp 440kg 12 Blades
VEGA/S150 150cm Working Width 45-70hp 450kg 14 Blades
VEGA/S175 175cm Working Width 50-70hp 500kg 16 Blades
VEGA/S200 200cm Working Width 60-70hp 560kg 18 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.75M (70HP GEARBOX) VEGA/S MULTI PURPOSE MULCHER

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush.
It is ideal for the clearance of arable stubble, maize and rapeseed crops.
Strenx 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing.
The undersole discs are produced from Hardox 450, a wear and abrasion resistant steel.
An optional side shift unit is available which allows the operator.
Features:
Can be front or rear mounted (to be specified when ordering)
Patented blender double chop blade system
25 percent less power and fuel consumption required than a similar sized flail machine Impact shock reducing swinging hardened spring steel blades
Low maintenance machine with less wearing parts than a flail mower
Heavy duty rear roller
Model:
MJ30-420 - 4.20m (13ft 9in) - 1,265 kg - 90-150HP - 6 Rotors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - SINGLE WING : 100-150HP

For front mounting vehicles without PTO Müthing supplies the MU-FM/Hydro flail mulcher with a powerful hydraulic motor.
As the basic professional model of the MU-FM/Hydro has the same build as the MU-FM. It of course also possesses the same impressive operating and quality advantages as the MU-FM,comparable versatility and identical optional equipment.
The drive of this mulcher requires an oil volume of 35 L/ minute (LPM) at a pressure of about 180 bar. This means that the MU-FM/Hydro can be used both on yard loaders and special hydro traction vehicles.
A large selection of mounting adapter plates for these vehicles simplifies mounting and optionally available hydraulic control blocks (spool) facilitates mounting onto vehicles hydraulic systems for oil volumes in excess of 48 L/min.
Features:
Manufactured from High Quality QSt/E Steel for front mounting for skid steering loaders.
Hydraulic drive for a volume flow from 35-70 l/min, with over run valve.
Belt protection with tension measuring slot.
Shackle M Carbide flails.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.side, wearing skids.
Carbide wearing skids, removable.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Hydraulic spool valves required: 1 x pressure flow, 1 x pressure less return flow (max. counter-pressure < 20 bar).
Hydraulic hoses without couplings.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Mounting plate for yard loaders (linkage parts to loader not included)
Mounting plate for yard loader Avant
Mounting plate for yard loader with EURO-3-socket
Mounting plate for yard loader Schaffer with old socket
Mounting plate for yard loader Schaffer with socket SWH
Mounting plate for yard Weidemann with hydraulic locking
Mounting plate with hydraulic side shift 700mm to the right not for a specific vehicle
Screw on socket for Avant, only in combination with MU-FMZ072
Screw on socket for EURO 3, only in combination with MU-FMZ072
Screw on socket for Schaffer old socket, only in combination with MU-FMZ072
Screw on socket for Schaffer SWH, only in combination with MU-FMZ072
Screw on socket for Weidemann with hydraulic locking, only in combination with MU-FMZ072
Hydraulic Control Spool (for oil flow over 48L/Min) Headstock with A frame Cat. 0
Headstock with A triangle Cat. 1 N
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller ( only MU-FM Hyrdo 140-160) additional charge
Models:
MU-FM 120-Hydro WW 1200mm Overall width 1450mm Oil-slow 35-70 l/min Weight 201kg Flails 20
MU-FM 140-Hydro WW 1400mm Overall width 1650mm Oil-slow 45-70 l/min Weight 217kg Flails 24
MU-FM 160-Hydro WW 1600mm Overall width 1850mm Oil-slow 45-70 l/min Weight 232kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 120CM MULCHER WITH HYDRAULIC DRIVE - SUITS 35-70LPM - MU-FM120

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 220cm
Working Width: 200cm
Required HP: 55hp
Weight: 780kg
No of Blades: 18
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2M (65HP) PEGASUS SWING ARM SIDE MULCHER

The Nobili NF mulcher is a heavy duty machine suitable for the most demanding orchard mulching tasks, along with general clearing. This mulcher is fitted with a double hood and height control is maintained by skids.
Features:
Suggested Use: Orchards, dense grass and green pruning's to 300mm.
Construction: High profile, adjustable tailboard and one mulching bar.
Control: Fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage.
Height Control: Skids.
Specifications:
Connection Type: Linkage
Blades: 34 Cast Hammers
HP: 110-200 HP
Working Width (MM): 2000
Product Weight (KG): 1520
Width / Height / Depth (mm): 2400 / 950 / 1280
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI NF ORCHARD MULCHERS 2M - NF2000/06- 110-200HP-HEAVY DUTY

Includes Rear Opening Tailgate (Maintenance Door)
Specifications:
Hydraulic Side Shift
Cutting width: 200cm
Blades: Hammer (18)
Cat 1 & 2 Linkage
100hp Gearbox inc over run clutch
Suits Tractors: 60 - 100 hp
x4 Belts inc auto belt tensioner
168mm diameter Roller
Weight: 612 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 200CM FLAIL MULCHER (60-100HP)

These heavy duty mulching mowers designed These heavy duty mulching mowers designed for a variety of mulching applications from rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter.
Designed and manufactured in Australia for Australian conditions.
High tip speed of 235 kph allows a higher cutting ground speed resulting in superior mulching ability. Also with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features:
Large adjustable back flap can be completely opened to allow quick release of material especially beneficial in heavy vegetation.
Fineness of mulching material can be controlled using the unique internal, adjustable mulching bar.
Standard with adjustable skids.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti wire rotor guard.
Optional adjustable rear roller and wheels are available for depth control.
Also available:
0155 Cyclomatic High-Body 2100 (7) Centreline Mulcher
Specifications:
Cutting Width: 2.05m
Overall Width: 2.3m
Body Height: 900mm
Weight: 750kg
Tractor HP Range (approx): 67-100
Blade Tip Speed: 235km/hr
Rotor Speed at 540rpm: 2268rpm
No Y Blades (Standard): 48
No Tee Hammers (Flails)(Optional): 24
NO SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (Adjustable): Offset/Centre
Options:
1613 Mulcher Adjustable Pair Solid Rubber Wheels
1778 Roller Kit c/w Bearings to Suit 2100 High Body Mulcher
BELTPW Optional Power Wedge Belts Suits High Body Mulcher
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC HIGH BODY 2100 (7') OFFSET MULCHER - 0121- 67-100HP

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

Banana AHM Mulcher - 285cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Banana farmers have 4 sizes to chose from; AHM160-B, 195-B, 240-B & 285-B.
Features:
- European Gearbox (85HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- 1000 PTO kit
- Twin 360 degrees castor rear wheels standard
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM BANANA MULCHER AHM SERIES - 285CM (85+ REQHP) - AHM/285-B

The Minos Agri TDSP Flail Mower/Mulcher is suitable for topping Grass, Orchards, Vineyards and general mulching use and is a rear tractor mount implement with 3 point linkage, driven by a 540rpm tractor PTO.
Working widths available from 1200mm to 2600mm. Utilises a heavy duty rotor with hammers, heavy duty body, rear rakes and an adjustable rear roller that combined helps to preserve cutting height, blade strength and balance even on uneven soil.
Specifications:
Working Width: 1850 mm
Overall Width: 2040 mm
Overall Length: 1100 mm
Overall Height: 1050 mm
Number Of Blades: 20
Machine Weight: 640 kg
PTO: 540 rpm
Required Power: 55 HP
Options:
Hydraulic Offset
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MINOS AGRI TDSP-1850 FLAIL MULCHER

Find Mulchers For Sale. Browse 260 Mulchers listings from Farm Supplies Machinery & Equipment.

New & Used Mulchers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

MAJOR 7.2M MJ30 MULCHING SLASHER INC REAR WHEELS 150-210HP

CELLI 1.75M (70HP GEARBOX) VEGA/S MULTI PURPOSE MULCHER

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - SINGLE WING : 100-150HP

MUTHING 120CM MULCHER WITH HYDRAULIC DRIVE - SUITS 35-70LPM - MU-FM120

CELLI 2M (65HP) PEGASUS SWING ARM SIDE MULCHER

NOBILI NF ORCHARD MULCHERS 2M - NF2000/06- 110-200HP-HEAVY DUTY

SOUTHERN CROSS AG MACHINERY 200CM FLAIL MULCHER (60-100HP)

JOHN BERENDS CYCLOMATIC HIGH BODY 2100 (7') OFFSET MULCHER - 0121- 67-100HP

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

AGRIFARM BANANA MULCHER AHM SERIES - 285CM (85+ REQHP) - AHM/285-B

MINOS AGRI TDSP-1850 FLAIL MULCHER

Farm Supplies Machinery & Equipment

Dealer Address