Farm Supplies Machinery & Equipment

Heavy Duty Log Fork & Grabs - Requires front remotes.

Specifications:

- Minimum diameter: 450
- Capacity: 1200kg
- Dimensions LxWxH (mm):1600x900x1030
- Weight (kg): 175

BURDER HEAVY DUTY LOG FORK AND GRABS

Southern Cross 6ft Galvanised Slasher - suit 50-75hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Bare-Co components are readily available from all good machinery dealer outlets located Australia wide
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 5mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 75HP gearbox. Gearbox supplied with oil (85/140 Gear
Oil).
- 3 Year Gearbox Warranty
- Bare-Co 8 inch slip clutch
- Bare-Co Series 6 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material
flow
- Bare-Co gearbox/slip clutch safety guarding
- Reinforced A-frame for strength and functionality
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (two-wheel kits are recommended for
the 6ft slasher)
Specifications:
- Recommended Tractor (HP) - 50-75
- Cutting Width (mm) - 1750
- Overall Width (mm) - 1870
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - Bare-Co B6002
- Blade Tip Speed (m/s max.) - 90
- Deck Thickness (mm) - 5.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/75HP
- PTO Driveline - Bare-CO 8 inch slip-clutch and Series 6 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter bar
- Optional Wheel Kit(s) - Twin kit available
- Offset - Left & right
- Gross Weight - 462kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT GALVANISED SLASHER, SUIT 50-75HP

Murray 53010, Series 53 Tow Hitch c/w 50mm tow ball - 3PL
Strong robust design to assist with hooking up trailers to your tractor. Available in four different styles.
Manufactured from global materials.
Features:
- All steel construction
- Hayman Reese compatibility
- Four different styles available
- Preassembled ready for use
- Upgraded specifications and steel wall thicknesses
Specifications:
- Tow Hitch c/w 50mm Towball - Cat I and II
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY TOW HITCH COMES WITH 50MM TOW BALL - 3 POINT LINKAGE

Southern Cross 5ft Galvanised Slasher - suit 35-75hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Key Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 4mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 75HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
- 3 Year Gearbox Warranty
- Bare-Co 8 inch slip clutch
- Bare-Co Series 6 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame for strength and functionality
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kit available (single wheel kit is recommended for the 5ft
slasher)
Specifications:
- Recommended Tractor (HP) - 35-75
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Number of Blades - 2
- Blade Size (mm) - 360 x 12.7mm Bare-Co B6002
- Blade Tip Speed (m/s max.) - 80
- Deck Thickness (mm) - 4.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/75HP
- PTO Driveline - Bare-CO 8 inch slip-clutch and Series 6 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter bar
- Optional Wheel Kit(s) - Single kit available
- Offset - Left & right
- Gross Weight - 372kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT GALVANISED SLASHER, SUIT 35-75HP

Pineapple AHM Mulcher - 240cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Prunings: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Macadamia mulchers have 3 sizes, AHM160-M, 195-M & 240-M.
Features:
- European Gearbox (70HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- Centrally mounted .
- 55mm taper lock rotor support bearings.
- Rear height roller
- Mulching bar
- Hydraulic angling rear deflectors
- Deflection both LH & RH
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MACADAMIA MULCHER AHM SERIES - 240CM (70+HP) - AHM/240-M

Bucket Edge specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,800MM LENGTH

1.2m Silage Grab (7 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (this model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.2M SILAGE GRAB

Berends rippers enable you to do a lot of hard work with minimum effort. Ideal for breaking up hard ground, ripping up stumps or rock, planting trees, laying polythene pipe or removing rabbit warrens. Ideally the ripper should be run through the ground prior to pipelaying to ensure there are no obstacles, and the required depth can be maintained. The Berends pipelayer is easy to take on and off for this reason. The pipe is usually rolled out next to the hole either over the tractor or with a second person feeding it from the side.

JOHN BERENDS COMPACT SINGLE TINE RIPPER AND PIPELAYER - 0024-0029

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

Loader Tine Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE NUT - M22

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 160 MULCHER (35-90HP) FRONT OR REAR

This heavy duty professional range for tractors of up to 220hp with side shift and front or rear mounting is the entry to the top range of Müthing mulchers.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-PRO Vario are required.
Features:
Manufactured from High Quality QST/E Steel with multi position headstock Cat. II + III for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Heavy duty gearbox with integrated over run clutch and through drive for 1.000 RPM.
Automatic belt tensioning.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Patented removable shredding bar System: Shark fin.
Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with Roller Bearing by Starinth.
Side, wearing skids.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Support leg.
Slotted holes in the lower link receiver for perfect contour following and an even quality cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication.
Adjustable Vario cutting bar for adjusting the shredding rate.
Hood Wear Plate (Factory Mounted).
Options:
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Hydraulic adjustment of cutting bar.
Scraper bar for displaced support roller MU-PRO Vario.
Second Patented removable shredding bar system: "Shark Fin".
Model:
MU-PRO 250 2500mm 220 HP WW 2500mm Overall width 2700mm Weight 1330kg Flails 22
MU-PRO 280 2800mm 220HP WW 2800mm Overall width 3000mm Weight 1400kg Flails 24
MU-PRO 300 3000mm 220HP WW 3000mm Overall width 3200mm Weight 1460kg Flails 26
MU-PRO 320 3200mm 220HP WW 3200mm Overall width 3400mm Weight 1500kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-PRO 300 MULCHER INC HYDRAULIC SIDE SHIFT

Find Machinery Attachments For Sale. Browse 1377 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

BURDER HEAVY DUTY LOG FORK AND GRABS

SOUTHERN CROSS AG MACHINERY 6FT GALVANISED SLASHER, SUIT 50-75HP

MURRAY TOW HITCH COMES WITH 50MM TOW BALL - 3 POINT LINKAGE

SOUTHERN CROSS AG MACHINERY 5FT GALVANISED SLASHER, SUIT 35-75HP

AGRIFARM MACADAMIA MULCHER AHM SERIES - 240CM (70+HP) - AHM/240-M

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,800MM LENGTH

RATA 1.2M SILAGE GRAB

JOHN BERENDS COMPACT SINGLE TINE RIPPER AND PIPELAYER - 0024-0029

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

SHW LOADER TINE NUT - M22

MUTHING MU-H VARIO 160 MULCHER (35-90HP) FRONT OR REAR

MUTHING MU-PRO 300 MULCHER INC HYDRAULIC SIDE SHIFT

Farm Supplies Machinery & Equipment

Dealer Address