Farm Supplies Machinery & Equipment

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 195cm cutting width
- European gearbox (40HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

Jarrett Redback Series Slasher 1.8m - 150hp
- Hi-speed gearbox, centre/offset.
- 5mm body and 6mm front and rear apron.
- 6mm x 200 deep skids.
Jarrett have been manufacturing slashers for over 60 years. Each new model release builds upon the strengths of the previous model and our Redback Series slashers are no exception! A whole New Design with More Features at a Better Price makes this series our best yet. Add our famous Jarrett Quality that we will never deviate from and the Redback Series is definitely on top of todays wish list for anyone purchasing a slasher.
Features:
- One Piece body sheet - Eliminates collection points for grass and debris. Simple cleaning.
- 3-degree, slide slope body - Adds to the ease of keeping the body free of debris and water lying on the body.
- Full length should gussets - Adds strength to the side of the body to withstand the side forces placed on the slasher when turning.
- Hot dip-galvanized body- Keeps your slasher in good order for many years of service.
- Strong headstock and solid backtays - Allows the slasher to be reversed into dense debris without rearing up toward the tractor.
- Central and offset mounting - Allows the slasher to be set in either Central, Left or Right offset.
- Double leg headstock (5-75 and above) - Lower link pins are held firm at each end reducing the strain on the slasher pins when the tractor is turning.
- Contour control tip link slide - Allows the slasher to better follow the contour of the land for a more even cut.
- 8mm headstock mounting gussets - Hidden inside the body design and combined with the 6mmfront and rear body panels ensures a rigid and strong fixing point for the headstock and backstays.
- Bolt-on chain guards are easy to repair when damaged, bolted on giving added strength to the leading edges.
- Skids reversible - Reversible and a slow 200mm radius front and rear leading edge keeps the skid from digging to help the slasher ride over irregularities on the ground.
- Skid adjustable plates - Adjusting plates give the skids 3 positive-lock height positions so you don't have to rely on just friction and aligning bolts and holes.
Specifications:
Body Plate thickness (mm) - 6
Total width (mm) - 1950
Cutting width (mm) - 1800
Gearbox hp- 150
Drive Shaft Series - S6
Clutch Diameter (mm) - 200
Tip Speed ft/min/(m/s) - 19,600(100)
Options:
- Solid Rubber Twin Wheel Kit (75hp gbox)
- Super Series Solid Rubber Single Wheel Kit (75-150hp)
- Super Series Solid Rubber Twin Wheel Kit (75-150hp)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 150HP - RB6-150

Bucket Edge specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,500MM LENGTH

900mm 4 Series Auger up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 900MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 300cm cutting width
- Italian manufactured high ratio gearbox (100HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- LH & RH discharge chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS300STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AGRIFARM PAINTED 300CM SIDE DISCHARGE ROTARY SLASHER (100HP) - ACS-STS SERIES

Bigfoot XD Trencher 900mm dig - 150mm earth chain with crumber bar. - 2 inch chain - Front mounted.
Price inclusions: 450 to 900mm dig trencher, chain, standard frame, 2.2m hoses & couplers.
Suits 4.5 tonne to 8 tonne machines.
Tractor requires Hydrostatic / Vario Transmission.
Ideal for excavators up to 8 tonne, skid steer loaders, backhoes, and tractors, the Bigfoot XD Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction.
An evolution from our Bigfoot Trencher with a greater trench digging depth of up to 1500mm.
Fitted with a patent pending Head Start Crumber system, quality Digga Planetary Drive & Eaton Hydraulic Motor, adjustable skid foot and single spoil removal auger for consistent digging depth.
Our unique design promotes efficient spoil removal and finely crumbled spoil for effective compaction back into the trench.
This provides minimal ground disturbance to surrounding conditions and results in a cleaner finish.
Earth Chain:
Earth Tooth on every Second Station.
An EARTH tooth configuration is best suited for soft clean ground with no floaters or tree roots like earth and clay.
Chain sizes available:
- 150mm
- 200mm
- 250mm
- 300mm
Features:
- Head Start Crumber System (patent pending) with steel scraper shoe begin trenching with the crumber down and save time by not having to get out of your machine
- Adjustable skid foot features 4 preset digging depths. Highly visible and can be seen from the cab. No spotter required
- Up to 1500mm dig depth & 300mm digging width with a 50.8mm chain 3 different chain options available: Earth, Combo, and Diggatac
- Standard Flow XD range features a compact, yet powerful Digga planetary drive High flow XD models come with a 6K Eaton hydraulic motor
- Frame can be side shifted for digging close to permanent structures
Ideal Use:
- Can be used for pipe laying for irrigation, underground power / communications, road repairs and general construction.
Specifications:
- Cutting Width: 150 / 200 /250 / 300 mm
- Foot Depth Presets: 450 / 600 / 750 / 900 mm
- Recommended Flow (lpm) 60-115
- Motor Size: 2K Bell EATON
- Max Pressure - Do not exceed 240 bar @ 60 lpm
- Max Flow - Do not exceed 95 lpm @ 200 bar
- Max Continuous Power 25 Kw (34 hp)
- Length: 2225 mm
- Horizontal Height: 777 mm
- Width: 1212 mm
- Weight - With a 150mm Combo Chain 388 kg
See photos for more information and specifications.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA BIGFOOT XD TRENCHER 900MM DIG - 150MM EARTH CHAIN WITH CRUMBER BAR

Australian Made Front End Loader Pallet Fork (JD QA)
Capacity: 1,500kg at 600mm
Weight: 140kg
Attachment: John Deere quick attach (QA)
Finish: Green/Black Powder Coat
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP JOHN DEERE QA ATTACHMENT FEL PALLET FORK - PF48JD

Daken Depth wheel (ONLY) for D180.
About the Grader Blade the wheel belongs to:
The Daken D180 Grader Blades are suitable for tractors up to 60hp and feature a deep reinforced mould board fitted to a reversible cutting edge that can pivot through 360 deg. The Grader Blade itself includes a bolt-on, reversible cutting edge, and pin adjustment offset control. The depth wheel option (this listing) helps to assist with levelling and road work.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN ADJUSTABLE DEPTH WHEEL (ONLY) TO SUIT GRADER BLADE

Built for rugged Australian conditions using top quality components. Horsepower requirements of 40-75HP. Available in 5ft (1.5m) to 6ft6in (2.0m) sizes.

JOHN BERENDS HD200 SLASHERS 2M - 0110, 40-75HP

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HD BIG SQUARE BALE FRAME - 2 X 1,100MM & 2 X 810MM (CONUS 2) - 1,500KG LOAD CAPACITY

Rasspe Radura Mower Blade Retainer specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE RETAINER - M12, 26MM LENGTH - REPLACEMENT FOR FELLA

Find Machinery Attachments For Sale. Browse 1322 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

JARRETT IMPLEMENTS REDBACK SERIES SLASHER 1.8M - 150HP - RB6-150

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,500MM LENGTH

DIGGA 900MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

AGRIFARM PAINTED 300CM SIDE DISCHARGE ROTARY SLASHER (100HP) - ACS-STS SERIES

DIGGA BIGFOOT XD TRENCHER 900MM DIG - 150MM EARTH CHAIN WITH CRUMBER BAR

FIELDQUIP JOHN DEERE QA ATTACHMENT FEL PALLET FORK - PF48JD

DAKEN ADJUSTABLE DEPTH WHEEL (ONLY) TO SUIT GRADER BLADE

JOHN BERENDS HD200 SLASHERS 2M - 0110, 40-75HP

SPAREX HD BIG SQUARE BALE FRAME - 2 X 1,100MM & 2 X 810MM (CONUS 2) - 1,500KG LOAD CAPACITY

RASSPE RADURA MOWER BLADE RETAINER - M12, 26MM LENGTH - REPLACEMENT FOR FELLA

Farm Supplies Machinery & Equipment

Dealer Address