Farm Supplies Machinery & Equipment

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush.
It is ideal for the clearance of arable stubble, maize and rapeseed crops.
Strenx 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing.
The undersole discs are produced from Hardox 450, a wear and abrasion resistant steel.
An optional side shift unit is available which allows the operator.
Features:
Can be front or rear mounted (to be specified when ordering)
Patented blender double chop blade system
25 percent less power and fuel consumption required than a similar sized flail machine Impact shock reducing swinging hardened spring steel blades
Low maintenance machine with less wearing parts than a flail mower
Heavy duty rear roller
Model:
MJ30-420 - 4.20m (13ft 9in) - 1,265 kg - 90-150HP - 6 Rotors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - DOUBLE WING : 100-150HP

Heavy duty hydraulic grader blade for tractors up to 125 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 125 hp
2400mm (8') wide
560kg
Reversible cutting edge
Three way adjustment by pin (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 560-M (manual operation)
Contractor 560-1 (hydraulic - 1 ram)
Contractor 560-2 (hydraulic - 2 ram)
Contractor 560-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARMGARD 2.4M (UP TO 125 HP) HYDRAULIC (2 RAM) CONTRACTOR GRADER BLADE

Painted ACS-STS Series Rotary Slasher. Side Throw Model.
Available in AHS and ACS series Slashers.
Features:
- 180cm cutting width
- Italian manufactured high ratio gearbox (54HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Slasher galvanised (4WACS180STSG)
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PAINTED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

The Powertech Tyre Handler (Grabber) - does not include adaptor plate.
From an idea several years ago while managing several different heavy vehicle workshops and struggling to find a safe and cost-effective solution for handling medium to large wheels and tyres, the Powertech Tyre Grabber 2200 was born.
Designed with the agricultural, mining, construction, and transport industries in mind this is the ultimate solution for safety and effortless handling of heavy tyres. Designed to streamline tyre changing and maintenance processes, this rugged and versatile attachment is a must-have for any industrial or commercial operation.
Whether you're in the agricultural, mining, construction, manufacturing, or logistics industry, this Tyre Handler attachment is the ultimate solution for optimizing tyre handling operations, improving safety, and increasing productivity.
Note: this product excludes an adaptor plate which will be required to attach the unit to a specific machine. Well need the specs on your machine before we can quote an adaptor plate price.
Key Features:
- Heavy-duty Construction: Constructed from high-quality, durable materials, this Tyre Handler is built to withstand the rigours of daily use in demanding environments.
- Superior Handling: With its ergonomic design and precision engineering, this attachment provides exceptional control and manoeuvrability, allowing operators to effortlessly lift, position, stack and transport tyres with ease.
- Versatility: The Tyre Handler is compatible with a wide range of machinery, including telehandlers, skid steers, forklifts and loaders, making it a versatile addition to any fleet.
- Enhanced Safety: Equipped with safety features such as secure clamping mechanisms and anti-slip surfaces on the grab arms, the Tyre Handler ensures the safe and secure handling of tyres, minimizing the risk of accidents and injuries.
- Increased Efficiency: By streamlining tyre handling processes and reducing the manpower required this attachment helps to boost productivity and reduce downtime, allowing businesses to maximize their operational efficiency.
Applications:
- Farming Operations: Increase tyre handling safety and efficiency while carrying out wheel changes on Headers, Sprayers, Tractors etc. Reduce downtime during critical harvest hours.
- Mining Operations: Increase tyre handling safety and reduce equipment downtime.
- Tyre Shops: Streamline tyre changing and storage processes in automotive and commercial tyre shops.
- Warehousing and Logistics: Facilitate safe, efficient movement and storage of tyres in warehouses and distribution centres.
- Industrial Facilities: Simplify tyre handling in manufacturing plants, construction sites, and other industrial settings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH TYRE GRABBER (HEAVY AND/OR LARGE TYRES)

150mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 150MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HD BIG SQUARE BALE FRAME - 2 X 1,100MM & 2 X 810MM (CONUS 2) - 2,000KG LOAD CAPACITY

Daken Flail mowers/mulchers are designed and built for light mulching. Suitable for light application on lawns and improved ground, standard with hammer type blades and rear roller.
Not recommended for clearing unimproved ground or medium to heavy growth.
Specifications:
Cut: 175cm
Blades: Hammer
Rear roller: yes
Skids: yes
Offset: manual
Weight: 300kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 175CM FLAIL MULCHER - 40009DC

350mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

Galvanised ACS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Features:
- 150cm cutting width
- Italian manufactured high ratio gearbox (40HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Single height control wheel
Optional Extras:
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 150CM SIDE DISCHARGE ROTARY SLASHER (40HP) - ACS-STS SERIES

Southern Cross 5ft Slasher - 30-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Optional Wheel Kit(s) - Twin Kit available
Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.5mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chains mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (one wheel kit is recommended for the 5ft slasher)
Specifications:
- Recommended Tractor (HP) - 30-45
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 3.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 323kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

450mm 4 Series Auger (Heavy conditions - (MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger, drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 450MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

40mm / 85mm Hammer Flail.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HAMMER FLAIL - 40MM TOP WIDTH, 85MM BOTTOM WIDTH - REPLACEMENT FOR AGROMEC, AGRIMASTER, ZANON

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - DOUBLE WING : 100-150HP

FARMGARD 2.4M (UP TO 125 HP) HYDRAULIC (2 RAM) CONTRACTOR GRADER BLADE

AGRIFARM PAINTED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

POWERTECH TYRE GRABBER (HEAVY AND/OR LARGE TYRES)

DIGGA 150MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

SPAREX HD BIG SQUARE BALE FRAME - 2 X 1,100MM & 2 X 810MM (CONUS 2) - 2,000KG LOAD CAPACITY

DAKEN 175CM FLAIL MULCHER - 40009DC

DIGGA 350MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

AGRIFARM GALVANISED 150CM SIDE DISCHARGE ROTARY SLASHER (40HP) - ACS-STS SERIES

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

DIGGA 450MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PTO HYDRAULIC DOWNFORCE

SPAREX HAMMER FLAIL - 40MM TOP WIDTH, 85MM BOTTOM WIDTH - REPLACEMENT FOR AGROMEC, AGRIMASTER, ZANON

Farm Supplies Machinery & Equipment

Dealer Address