Farm Supplies Machinery & Equipment

A light duty dual mount slasher for grass and light work. Ideal for compact tractors. Front and rear stone guarding as standard.
Features:
Body designed with 3mm top plate and strong 6mm thick adjustable skids.
Italian made Bondioli & Pavesi Series 2 pto driveshaft with shearbolt protection rated at 900NM. Optional 2 plate slip clutch with Series 4 shaft. (The clutch is standard on the TA135 and TA150 models).
Cat 1 linkage with both offset and centre mount positions.
Hardened and tempered stepped/bushed slasher blades.
Standard with full length hinging rear steel stone flap and front rubber guard.
Adjustable skids have cutting height range of 25 100mm.
40 HP oil lubricated gearbox.
Floating headstock.
Document holder fitted.
Full 12 month warranty on design and manufacture.
Specifications:
Cutting Width 1460mm
Overall Width 1560mm
Overall Length 1580mm
Tractor HP 25-50
Cutting Height 25-100mm
Weight 245kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TA150 LIGHT DUTY SLASHERS 1.5M - 0364, 40HP

A versatile implement that every tractor should have. Transport hay bales, fence posts, firewood, tools, fertilizer, spray tanks and much more, wherever you go.
- Featuring a strong hardwood floor.
- End lugs allow operator to easily fit pipes to prevent materials such as fence posts rolling off.
- The 4ft model linkage can be adjusted to suit compact tractors.
- 12 month Manufacturers warranty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CARRYALLS 6FT X 3FT6IN - 0130

Murray Series 54 Smudge Bar 2.4m - 3PL.
Versatile implement that allows the user to level ground, finish dirt driveways, spread sand in horse arenas and more.
Cat I Pins come as standard. Cat II Pins are available. Manufactured from global materials.
Features:
- Made from heavy duty angle steel main frame 75x75x8
- Foldable Three Point Linkage arm for flat pack storage.
Specifications:
Width - 2.4m
Weight - 140kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY SMUDGE BAR 2.4M, 3PL- SERIES 54

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0122 Cyclomatic 2100 (7) Centreline Mulcher
Specifications:
Cutting Width: 2.05m
Overall Width: 2.3m
Body Height: 500mm
Weight: 540kg
Tractor HP Range: 56-84
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 48
No of Tee Hammers (Flails) (Optional): 24
No of SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 2100 (7') OFFSET LOW BODY MULCHER - 56-84HP (0120)

Murray Series 62 - 9 Tine Chisel Plow complete (small frame c/w 2 extension stub frames).
Field proven through the toughest seasons
Machines are supplied with all components, including long shank tines, clamps, bottom linkage pins, clips and 75mm reversible points (Standard) etc, to fully complete the size specified.
Adjustable Tine Spacing (standard spacing 300mm) just move mount clamps and / or add additional Tine assemblies if required
Suitable for tractors fitted with Cat II three-point linkage systems. (Top link and pin NOT supplied).
Frame construction 100mm square RHS, underframe clearance 630mm (24), Rank spacing 760mm (30), optional depth control wheels 500mm 100mm approx. Tine steel shank size 75 25mm.
Power requirements; This depends very much on soil type, working depth and conditions; however, allow up to 8 kw (10 hp) (PTO) per tine. ie 9 tines = approx 72 kw (90 hp).
Specifications:
- Tine Spacing: 300mm
- Weight kg: 391
Options:
- One pair of depth control wheel assemblies.
- Recommended in most applications to avoid the Chisel Plow digging in.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 9 TINE RIGID CHISEL PLOW COMPLETE (SMALL FRAME C/W 2 EXTENSION STUB FRAMES)

Muratori Mulcher suitable for tractors up to 80HP with Hammer Blades, counter blade, rear bonnet and rear roller. For grass, pruning's and stubble. "Y" blades also available.
Specifications:
- 50-80 HP
- 16 Hammer Blades (optional 48 "Y" blades available)
- 220cm Overall width
- 204cm Working width
- Hydraulic off-set with 27cm movement
Options:
- Manual off-set with crank
- Trailing wheels (2)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN MURATORI 2.04M (50-80HP) MULCHER (INC HYDRAULIC OFF-SET) - MT80 200

Round Bale Forks 2x Conus II Tines - 1240mm tine length.
Features:
- Removable tines
- Optional Burder or Euro mounts
- 2 x Conus 2 tines (1240mm round tines with pointed end)
- 1240mm x 1275mm x 750mm (LxWxH)
- 145kg
Options:
- Extra lift height - requires front remotes
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER ROUND BALE FORKS INC CONUS II TINES -1240MM

This rear mounting hydraulic folding six metre mulcher is German engineering at its best.
Ideal for both pasture and stubble management along with general wide area mulching.
Manufactured from high quality QSt/E Steel with Headstock Cat. II & III for rear mounting.
Recommended for tractors 140-250HP.
Four rubber trailing wheels with 360° swivel.
Features:
Manufactured from High Quality Qst/E Steel with Headstock Cat.II & III for rear mounting.
Four rubber wheels, 360° swivel, height adjustable, 23X10.50-12.
Gearbox with integrated over run clutch for 1000 r.p.m.
Automatic belt tensioning.
Hood wear plates.
Hydraulic transport safety lock at an angle of 90°.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Well balanced spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Patented removable shredding bar System : Shark Fin.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the wheels guarantees perfect contour following and an even quality of cut.
Two single acting spool valves requested.
PTO shaft with cap bottom lubrication.
Warning signs and lights (LED mounted).
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Scrapper rail for MU-M/F 600 Vario (2 units must be ordered for entire working width).
Additional protection device for heavy duty work in extremely stony conditions.
Second screw-type short chopping bar system: "shark-fin design" - A Muthing patent (2 units must be ordered for entire working width).
Hydraulic powered central strip mulcher.
Operating hours counter with sensor, time recording via angular momentum.
Quick-hitch adapter, Cat. 3.
Model:
MU-M600 41.1 (4 Wheels) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
MU-M600 41.2 (Support Rollers) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

250MM 4 Series auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Heavy duty strength at a light duty price.
Features:
Fitted with high tensile 50mm main pivot pin to minimise wear and tear and avoid breakage.
24 angle positions to both right and left allowing blade to work outside the tractor wheel, even at an angle.
Blade rotates 360 degrees allowing forwards and backwards operation.
Adequate tilt via the linkage pin position and tractor levelling box.
Curved 10mm thick mouldboard for strong cuts at the correct angle and high clearance for greater capacity.
Hardened, reversible cutting edges (as used on road graders).
Optional Holden depth wheel (at additional cost) with either manual ratchet or hydraulic adjustment.
Available in 6ft (1.8m), 7ft (2.1m) and 8ft (2.4m) widths.
12 Month Warranty against faulty materials or workmanship.
Specifications
Cutting Edge Width: 6ft (1.8m)
Mouldboard Thickness: 10mm
Mouldboard Height: 500mm
No Offset Positions: 8
No Angle Positions: 24
Tractor HP: 40-100
Category-3 Point Linkage: Cat 1/2
Weight: 305kg
Also available:
0036 7ft Grader Blade HD Model
0037 8ft Grader Blade HD Model
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HEAVY DUTY GRADER BLADES 6FT (1.8M) - 0035, SUIT 40-100HP

Australian made Frame - German made Spears
Features:
- Quality German-made 1200 mm removable spears - conus 2
- Bright red colouring for maximum visibility
- 2 or 4 spear configurations to deal with various loads
- 1,200 mm Spears are removable
- 1,200 mm back frame height for square bales
- Euro hitch as standard
- Frame Height = 1,200 mm
- Weight = 213 kg
- Suits : 40 - 115 hp
- Lift Capacity = 2,500 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH DOUBLE ROUND HAY FORKS (FOUR SPEAR)

Made in Australia
Features:
- Manufactured and designed in Australia
- Includes certified swivel lifting hook
- Compliance plate fitted
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 1,500 mm
Weight = 120 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH LIFTING JIB (1,500MM)

Find Machinery Attachments For Sale. Browse 1320 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TA150 LIGHT DUTY SLASHERS 1.5M - 0364, 40HP

JOHN BERENDS CARRYALLS 6FT X 3FT6IN - 0130

MURRAY SMUDGE BAR 2.4M, 3PL- SERIES 54

JOHN BERENDS CYCLOMATIC 2100 (7') OFFSET LOW BODY MULCHER - 56-84HP (0120)

MURRAY 9 TINE RIGID CHISEL PLOW COMPLETE (SMALL FRAME C/W 2 EXTENSION STUB FRAMES)

DAKEN MURATORI 2.04M (50-80HP) MULCHER (INC HYDRAULIC OFF-SET) - MT80 200

BURDER ROUND BALE FORKS INC CONUS II TINES -1240MM

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

DIGGA 250MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

JOHN BERENDS HEAVY DUTY GRADER BLADES 6FT (1.8M) - 0035, SUIT 40-100HP

HIMAC EURO HITCH DOUBLE ROUND HAY FORKS (FOUR SPEAR)

HIMAC EURO HITCH LIFTING JIB (1,500MM)

Farm Supplies Machinery & Equipment

Dealer Address