Farm Supplies Machinery & Equipment

Daken 405 Series Slashers - 1.0m 405 Slasher.
Our long experience in slasher design continues with these Daken 405 Series Slasher which are light to medium duty slashers. Built with no under body bracing and with good rotor to body clearance they do a great cutting job.
The 405 series slashers are suitable for many cutting applications for tractors up to 50hp (40hp gearbox). They are not built to a price but fully featured to give you the best possible performance.
Features:
- Built to comply with the stringent Work Cover regulations.
- Gear box 40hp
- Gear box 1.1.93 Ratio
- Body Plate 4mm
- Adjustable skids
- Laminated Rotor
- Floating Headstock
- Can be offset left or right
- 6 two plate slip clutch
- Cat 0/1
- Hot dipped galvanised finish
- Comes with series 4 PTO shaft and Chain guards front and rear.
- Weight = 209 kg
Options:
- Level wheel suits all 405 models
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 1.0M SLASHER 405 SERIES 40HP GALVANISED - 55620DC

The Major Trailed Topper is a fully offset gear driven machine.
It is offset for working and is folded into transport position hydraulically from the tractor seat.
The rotors are timed with each other and have an overlap of 3 inches (75mm). The blades rotate in opposite directions to each other and spread the cut grass evenly behind the machine. As the machine is fully offset there is no trampling of the pasture prior to cutting.
The cutting height is set at the desired level by moving the adjustable side skids to the appropriate position. There is a limit stop on the ram which controls the rear axle.
Features:
Full hydraulic offset control
Hydraulic breakaway system
Wide angle PTO shaft
Twin-cut ProCut swinging blades
Model:
MJ45-360 3.6m (12ft) 1,240 kg 40-120HP 3 Rotors 50-205mm Cutting Height
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR TRAILED OFFSET TOPPER SERIES - 3.6M - 12FTGDW-HD, 40-120HP

Stick rake 4ft or 1.2m.
The Daken Stick Rake is a very handy tool for cleaning up sticks and leaves around your property or reducing fire hazards.
It easily mounts to a tractors 3 point linkage with a comb that can be angled and spring steel tines.
If it is collecting too much material every second tine can be removed to allow for smaller objects to clear.
Features:
- Fits Cat 1 tractors
- Spring steel Tines
- Easy to use
- Suits Cat 1 or 2
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN STICK RAKE 4FT - 61018DC

Mower Blade Holder.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX MOWER BLADE HOLDER - 180MM LENGTH, 125MM WIDTH - REPLACEMENT FOR PZ

Loader Tine specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHW LOADER TINE - STRAIGHT, 680MM LENGTH (SQUARE)

Bucket Edge specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,800MM LENGTH

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE STEPPED - 106 X 47 X 3MM (RH & LH) - REPLACEMENT FOR PZ, CLAAS, KRONE, MASSEY FERGUSON, POTTINGER, MARANGON, KVERNELAND, TAARUP, VICON

400mm TP series Tree Planting Auger (soft earth) up to 5T for Ramdrill PTO - Hydraulic downforce.
Price inclusions: 50.8mm HUB Tree Auger, teeth, pin and clip.
TP - Tree planter
Designed to drill a smaller diameter hole for the tap root and a larger secondary hole at the top for the root ball. The design of the Tree Planter cutting system will leave the hole walls rough and not glazed, meaning the plant stock has the maximum chance of establishing.
The angle and geometry of the teeth to the pilot
is the key to the efficiency in which these augers
perform. Available for drilling in earth (TS tooth
style), providing longer wear life and greater
cutting performance. Not suited for rock.
Features:
- Designed to easily dig and place trees and shrubs of all sizes
- Cutting system designed to prevent root binding
- Improves plant establishment
- Adaptors & extensions to maximise drilling depth
- Robust Auger body construction for long life
- Heavy duty tu7be with highest grade steel
- Replaceable wearparts
- Quality Australian made
Specifications:
- Drilling Conditions: soft earth
- Standard Hub: 50.8mm round
- Overall Length: 1200 mm
- Flights (Lead): 6 mm
- Flights (Carry): 6 mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: PDD-PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay:45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N/A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 400MM TREE PLANTING AUGER FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

500MM 4 Series Auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

40mm / 54mm Hammer Flail.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HAMMER FLAIL - 40MM TOP WIDTH, 54MM BOTTOM WIDTH - REPLACEMENT FOR MCCONNEL, BERTI

Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE TWISTED - 96 X 48 X 4MM (LH) - REPLACEMENT FOR CLAAS, KRONE

350MM 4 Series Auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Find Machinery Attachments For Sale. Browse 1356 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

DAKEN 1.0M SLASHER 405 SERIES 40HP GALVANISED - 55620DC

MAJOR TRAILED OFFSET TOPPER SERIES - 3.6M - 12FTGDW-HD, 40-120HP

DAKEN STICK RAKE 4FT - 61018DC

SPAREX MOWER BLADE HOLDER - 180MM LENGTH, 125MM WIDTH - REPLACEMENT FOR PZ

SHW LOADER TINE - STRAIGHT, 680MM LENGTH (SQUARE)

SPAREX WELD ON BUCKET EDGE (SINGLE BEVEL) - HARDNESS: 250 - 300HB, 2,800MM LENGTH

RASSPE RADURA MOWER BLADE STEPPED - 106 X 47 X 3MM (RH & LH) - REPLACEMENT FOR PZ, CLAAS, KRONE, MASSEY FERGUSON, POTTINGER, MARANGON, KVERNELAND, TAARUP, VICON

DIGGA 400MM TREE PLANTING AUGER FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

DIGGA 500MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

SPAREX HAMMER FLAIL - 40MM TOP WIDTH, 54MM BOTTOM WIDTH - REPLACEMENT FOR MCCONNEL, BERTI

RASSPE RADURA MOWER BLADE TWISTED - 96 X 48 X 4MM (LH) - REPLACEMENT FOR CLAAS, KRONE

DIGGA 350MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Farm Supplies Machinery & Equipment

Dealer Address