Farm Supplies Machinery & Equipment

The Nobili BE Series is best suited to medium horsepower tractors up to 65HP with the option of front or rear tractor mount and cutting height maintained by the rear roller (including reversible cab tractors).
Suggested Use: Grass mowing and green pruning's up to 40mm in diameter.
Construction: Low profile body, no opening tailboard.
Control: Two position fixed headstock or optional hydraulic side shift.
Driveline: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys. Dual drive (drive from both ends) and electronically balanced rotor.
Attachment: Cat. I three point linkage (BE14, BE16), Cat I/II three point linkage (BE18, BE20). Floating top link included.
Height Control: Roller standard.
Model Working Width Tractor HP Weight
BE14/06 1400mm 35 - 65 HP 335 kg
BE16/06 1600mm 39 - 65 HP 370 kg
BE18/06 1800mm 42 - 65 HP 410 kg
BE20/06 2000mm 44 - 65 HP 450 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.4M BE MULCHER (UP TO 65HP) FRONT OR REAR MOUNT

Titan backhoes are designed to provide superior digging, trenching and material handling. It is high versatile and can be used for a wide variety of tasks such as excavating, landscaping, and construction works. All of Titan backhoes are 3 point linkage mounts.

Note: 

- All models include PTO pump and Tank, bolt up lock up bar kit to suit. 
- Dealer to allow 3-4 hours shop time for fitting, to include possible addition of welding and painting costs, to ensure product safety when being fitted to some tractors.
- The Side Shift unit is heavier duty, and is recommended for higher duty cycle applications.
- Tractors with PTO seat safety switch will require extra electricals at the dealership.

BURDER 180CM DIG DEPTH BACK HOE (30-50HP) - SIDE SHIFT - 3PL - C180

Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
Features on our Mulchers make the full range stand out from the opposition.
The AMM series is a medium duty mulcher suitable for pastures and crops. Residues are finely chopped and the swath evenly spread over the ground providing a mulch to improve soil moisture retention and seed germination.
Features:
- 195cm cutting width
- European gearbox (40HP)
- Clevis hitch cat 1 three point linkage.
- Chain top link.
- 4mm Body panel to withstand obstacle impact.
- Blades pivoting on hardened bushes and grade 8 bolts.
- Adjustable height skids.
- Built-in mulching bar.
- 6 series European driveshaft comes with integral clutch
Optional extras:
- Friction clutch
- Height roller
- Twin height wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

Buck Rake Conus 2 tines Hyd Push off - 2400mm
Specifications:
Width: 2400mm
Capacity (m3): 4.00
Weight: 1800kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER BUCK RAKE - CONUS 2 TINES - 2400MM

The GH-3004 Aervator is a high utility farm implement that relieves compaction, aerates, cultivates and renovates. It can function as a rotary hoe, a disc, a roller and a harrow and increases the effectiveness of water and fertiliser.
Product Features
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.50 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.50 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Equipment Options
Trailing kits for all models
Hard facing tine option
Hydraulic folding wings
Removable concrete weights
Turf tines
Larger models available up to 12m
Aeration requires multiple uses of the aervator to achieve results.
Depending on your soil structure, this could take 12-24 months.
The ideal time to use is autumn and spring depending on your rainfall.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 3M - GH-3004. MIN 85+HP.

Galvanised ACS-STS Series Rotary Slasher. Side Throw Model. Available in AHS and ACS series Slashers.
Features:
- 180cm cutting width
- Italian manufactured high ratio gearbox (54HP)
- STD with rear wheel kit
- Chain top links
- Adjustable opening side chute
- Lifting throw blades
- Swing back blades
- Multi Leaf Bisalloy blade beams
- Cat 1 Clevis Hitch 3PL
- Fully adjustable skids with angle iron reinforcement
- 8 series European driveshaft with integral 4 plate clutch
- Twin height control wheel
Optional Extras:
- Chain guard front & rear
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

Galvanised Agrifarm ACS Slasher. Extra heavy duty slasher for contractors, local government bodies and farm clearing work.
Features:
- 180cm cutting width
- Italian Manufactured High Ration Gearboxes (125 HP)
- 8 series drive shaft with 4 plate friction clutch.
- High ratio gearbox produces optimum blade tip speed.
- Heavily reinforced 5mm body, galvanizing option.
- Swing back blades
- 300mm underbody clearance to handle the heaviest crop.
- Floating headstock slasher follows ground profile.
- Laminated Bisalloy blade beam offset suction lift blades.
- Front & rear chain curtains standard
- Cat 1 & 2 Clevis Hitch 3PL
- Pivoting RHS Tube Headstock with Chain Backstays (150,180)
Optional Extras:
- Chain guard front/rear
- Height wheels - single
- Height wheels - twin
- Roller kit
- Support stand Complete
- Support stand Mtg tube only
- Body corner guards
- Council rear sign holder
- Council knapsack holder
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM GALVANISED 180CM ROTARY SLASHER (125HP) - ACS SERIES

Banana AHM Mulcher - 195cm - Australian designed and manufactured to suit a wide variety of farming and local government requirements. Ranging in size from 155cm to 900cm cutting width.
The AHM series is a heavy-duty mulcher best suited to typical farming applications such as:
Wheat, Maize, Sorghum, Rice and Cotton stubble. Tobacco, Potato haulms, Sweet Potato, Pineapple tops, pasture topping.
Pruning: Macadamia, Grapes, Banana plants & Avocados
These models are also fitted with a heavy duty Rotor and additional body panels.
Banana farmers have 4 sizes to chose from; AHM160-B, 195-B, 240-B & 285-B.
Features:
- European Gearbox (60HP)
- SPBX Section American V Belts
- Double Skin Body
- High Blade Tip Speed for Optimum Mulch
- Y Blades Pivot on Hardened Steel Bushes
- 220mm diameter Rotor Tube
- Taperlock Rotor Bearings 55mm capacity
- Six Row Blade Configuration
- Cat 1 & 2 Clevis Hitch 3PL
- Fully Adjustable Rear Flap 500mm maximum opening
- 8 Series European Driveshaft c/w Integral Clutch
- Floating Top Link to Follow Undulations
- 1000 PTO kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM BANANA MULCHER AHM SERIES - 195CM (60+HP REQ)- AHM/195-B

Experience the full power of the STOLL ProfiLine Next Generation. The amazing best values in all areas ensure the highest quality in lifting capacity and lifting height, stability and loading speed. In addition to this, the individually selectable accessories from the ProfiLine Next Generation fit in perfectly with your needs as a farmer or contractor. True professionals for professionals.
German engineering is known all around the world for its high quality, performance and reliability. That is why we develop all STOLL front loaders with precisely these values in Germany. They combine state-of-the-art technology with innovative solutions and this is exactly what we expect from high-quality German products.
All Stoll FZ Loaders include Premium Internal Self Level System, 3rd Function and Manual Soft Ride, Single Lever Joystick, 2 Bank Valve and tractor hydraulics, Rams Horns Bump Guard and Subframe kit.
FZ20 Specifications:
Oil Flow: 39 - 23
HP Range: 70 - 110
Buckets That Suit This Loader:
1.9, 2.05 Heavy Duty Gravel Bucket
1.8 - 8000, 2.1 - 8000 Heavy Duty 4 in 1 Bucket
Loader Options:
- 4th function
- Hydro fix - attachments per circuit
- Hydro fix - attachment side only
- Electric comfort drive upgrade
- Return to level
- Plus function
- Colour code sticker set
- Hydraulic quick change
- Full mesh grille guard
Control Options:
- Hoses to mid remotes
- Double rear diverter upgrade
- Tap and tee manual
- Pro control joystick system upgrade
Further Information on this Loader:
Full Power - Maximum Stable Construction:
- The ProfiLine FZ front loaders are made of fine grain steel - Advantage: Highest stability with maximum torsional rigidity at the same time.
- The lifting arm boom is bent from a single piece of steel - The control rods are installed inside the beam. All the hydraulic lines are well protected but can be freely accessed under the beam.
- Kinematics of the entire swing arm body adapted to modern tractors. This results in optimum positioning of the swing arm to relieve the front axle and the best possible clearance for steering angle and axle swing path.
- In order to avoid the need to regularly replace the hose lines by the lifting arms in accordance with DIN 20066, we use wear-free steel hydraulic pipes instead.
Stoll Attachment Components - less load on the tractor and a greater accurate fit:
- The attachment components can be installed perfectly on all common tractors that is why the designers at STOLL individually adapt every tractor model.
- Reduced load on the front axle thanks to the optimal positioning of the attachment components close to the drivers cab. This shifts the centre of gravity of the entire front loader to the centre of gravity of the tractor.
- Often the windscreen can only be opened together with a STOLL attachment component.
- The attachment components fit perfectly as they are individually adapted to each tractor.
Z-Kinematics - best view & high performance:
- The rods of the mechanical parallel guide are located in the lifting arm booms - the basis of the Z-kinematics.
- This frees up the view for the driver. No parts above the lifting arms obstruct or are in the way. Another benefit: The front loader can also be mounted closer to the drivers cab - result: Reducing the load on the tractor by optimally positioning the attachment components.
- Front loaders with Z-kinematics have even greater lift capacities and breakout forces. There is no loss of lifting power.
Convincing benefits for you:
- The various front loader models fit perfectly on tractors from 50 to over 300 hp.
- Best quality fine-grained steel for a front loader with high torsional rigidity and stability.
- The extremely high values for the lifting capacity and height are impressive.
- Z-kinematics and the optimally positioned cross tube provide the driver with the best view of the implement.
- For maintenance work, all you need is a commercially available spanner to get to the lines.
- Best equipment for optional features so you can work with even greater efficiency:
- Return-to-level, rapid emptying and re-scooping.
- Re-scooping series.
- Depending on the loader model, quick release frames are available for other coupling systems STOLL offers full flexibility.
So much more information included in the pictures!
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER STOLL FZ20 FRONT END LOADER (70 - 110 HP) (39 - 23 LPM)

Single Deck Finishing mower 3m, long front roller, long rear roller.
The Jarrett TM Series finishing park mower continues to impress operators, supervisors and managers around Australia!
Its strong, well-made and so simple and easy to use its easy to clean and it cuts so fine ... are typical feedback comments we receive every time a TM series mower is introduced to a new user.
The Jarrett TM Series range from a cutting width of 1.8m (6) to 4.3m (14) and, with various blade, roller and wheel options, gives you an extremely effective, efficient and versatile finishing park mower.
Features include:
- Width: 3m
- 3-spindle Full rollers, front and rear
- Min 50hp req
- Approx weight: 800kg
Options:
- Short front roller in lieu of long front roller
- Rear Caster Wheels
- Wing skid front rollers
- Anti scalp rollers, main frame
- Galvanised body
See photo gallery for more information on this product.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS 3M SINGLE DECK FINISHING MOWER, MIN 50HP REQ - TM302

This heavy duty professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive blead for displaced roller towards the back, starting from model 2016.
Second Patened removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M 220 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

Front or Rear Mounting for Tractors up to 90HP
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 220 MULCHER FRONT OR REAR MOUNTING

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 892 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

NOBILI 1.4M BE MULCHER (UP TO 65HP) FRONT OR REAR MOUNT

BURDER 180CM DIG DEPTH BACK HOE (30-50HP) - SIDE SHIFT - 3PL - C180

AGRIFARM MULCHER AMM SERIES 195CM (40HP) - AMM/195

BURDER TELEHANDLER BUCK RAKE - CONUS 2 TINES - 2400MM

AERVATOR GH SERIES 3M - GH-3004. MIN 85+HP.

AGRIFARM GALVANISED 180CM SIDE DISCHARGE ROTARY SLASHER (54HP) - ACS-STS SERIES

AGRIFARM GALVANISED 180CM ROTARY SLASHER (125HP) - ACS SERIES

AGRIFARM BANANA MULCHER AHM SERIES - 195CM (60+HP REQ)- AHM/195-B

BURDER STOLL FZ20 FRONT END LOADER (70 - 110 HP) (39 - 23 LPM)

JARRETT IMPLEMENTS 3M SINGLE DECK FINISHING MOWER, MIN 50HP REQ - TM302

MUTHING MU-M 220 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

MUTHING MU-O 220 MULCHER FRONT OR REAR MOUNTING

Farm Supplies Machinery & Equipment

Dealer Address