Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1575kg
No of bearings: 6
No of axles: 2
Cutting width: 2.06m (6ft 9inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 5MM DISCS - 0830, SUIT 60-130HP

Medium duty power harrow for tractors up to 110 / 130hp.
Suitable for small agricultural applications.
Specifications:
Actual Width: 255cm
Working Width: 250cm
Required HP: 80-110hp
Weight: Cage roller - 770kg, Packer roller - 880kg
No of Blades: 20
Features:
Rated up to 110hp
324 rotor speed
540 rpm
Category two linkage
Manual depth control
Rear levelling bar with winder control and indicator
285 x 90 x 12mm tines
285mm working depth
45 degree sliding side plates
Shearbolt safety on driveshaft
Greasable top bearings
Accessories:
Hydraulic kit for roller adjustment
Four speed gearbox (540 / 1000 rpm) - rated to 130hp
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
RANGER250 250cm Working Width 80-110HP 20 Tines
RANGER300 300cm Working Width 85-110HP 24 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (80-110 HP) RANGER POWER HARROW

Heavy duty rotary hoe suitable for tractors up to 190hp. 190F-255 (130-190 HP).
Specifications:
Actual Width: 282cm
Working Width: 260cm
Required HP: 130-190hp
Weight: 1120kg
No of Blades: 60
Features:
Rated up to 190hp
Two speed gearbox
1000rpm
Swinging lower links
Gear side drive
80x8mm L blades
6 blades per flange
250mm working depth
Side skids
Two piece adjustable, spring loaded frangor tailgates
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options
Spike rotor spike (30x30x170)
Anti-pan rotor (straight blade)
Roller Options
Cage roller (440mm diameter)
Packer roller (470mm diameter)
Accessories:
Oil cooler kit
Bolt on double flange kit per flange
Hydraulic adjustment for rear roller
Hydraulic tailgate adjustment
Rear steel wheels
C (speed) blades in lieu of L blades
Sugar Cane/Pineapple Version (Tiger 190F-305-SC):
Heavy headstock with oil cooler
100x100mm front beam
10mm blades
500mm diameter rear Cage roller
Hydraulic roller adjustment
Models:
TIGER190F-255 260cm Working width 130-190hp 1120kg 60 Blades
TIGER190F-280 280cm Working width 140-190hp 1180kg 66 Blades
TIGER190F-305 310cm Working width 155-190hp 1240kg 72 Blades
TIGER190F-305-SC 310cm Working width 155-190hp 1240kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.6M (130-190HP) TIGER ROTARY HOE

The Grow-Master aerator can turn your tired, life-less soil into productive, high yielding pastures. This versatile implement will aerate, cultivate and renovate your soils.
The specially designed tines shatter the compact ground, increasing the absorption of water and air which in turn encourages root growth. The tines have a slight twist in them which cracks the ground in a sideways and downwards motion. This allows water, air and nutrients to move readily through the soil profile making them more available for plant roots.
The grow-master is fitted with double rollers which are angled in opposite directions. This reduces sideway drag on the tractor when ground engaging. Each roller can be adjusted for various degrees of angle from 2.5 to a maximum of 10 (four positions).
The maximum offset position is the most aggressive and is most often used for cultivation and for over-sowing new pasture seed. Ballast weight added to the frame will ensure that the tines are buried down to the hub.
Horsepower requirement is quite low with a minimum of only 35Hp required for the 2m unit. A tow hook is mounted on the back for dragging pasture harrows. 2 bolt gang adjustable to alter rotor angle.
Large floor plate deck for carrying ballast (weight) 100x100x6mm RHS Perimeter frame. Heavy Duty 2 triple sealed bearings. Double rollers allow machine to be angle for more aggressive cultivation.
Easy adjust mounting stands. Solid 75mm rotor. Roller is fitted with the same 2 heavy duty bearings used on the Berends Rotary Drain digger for over 30 years. The patented Shatter tines are 8 long and have a unique angle providing a much superior finish to conventional straight tines.
Product Specifications
Aerate, Renovate and Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate and Renovate 2.5 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate and Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate and Renovate 7.5 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Optional
Trailing Wheelkit includes wheels, drawbar and hydraulic lift (0190)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROWMASTER 4000 AERATORS - FOUR ROTOR - 0187

Made in UK
Suits Tractors 45 - 70 LPM, or 90 - 150hp
Features:
- Tie-rodless, solid body design
- Side mount for superior control and precision
- Fully serviceable using no specialist tools
- Line up and ram posts without digging
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Weight = 190 kg
Max BPM = 1,200 BPM
Max energy per blow = 1200 J
Note:: 150 mm post driver Moil included. Other diameter (180mm, 200mm) Moils available at cost.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH POST RAMMER (45 - 70 LPM)

Heavy duty hydraulic grader blade for tractors up to 125 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 125 hp
2400mm (8') wide
560kg
Reversible cutting edge
Three way adjustment by pin (manual or hydraulic)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
Contractor 560-M (manual operation)
Contractor 560-1 (hydraulic - 1 ram)
Contractor 560-2 (hydraulic - 2 ram)
Contractor 560-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.4M (UP TO 125 HP) HYDRAULIC (3 RAM) CONTRACTOR GRADER BLADE

6" Jas Smith Roller Mill. Pictures do show including optional frames, wheels, augers, hoppers, larger mill etc. But these products are not included in the advertised price. Just demonstrations of how to use them, or what you can do in your own operation.
6" Available in 3 versions...
PTO driven
4kw 3 phase motor (as priced here)
4 kw single phase motor
This 2 ½ tonne machine can have augers fitted or be combined with a feed mixer (with or without load cells) to make a complete processing plant to suit your needs
Due to their robust build, solid grooved hollow bar rollers, fitted with horse shoe magnets, and their large capacity these roller mills are sold to the dairy industry or large horse studs where high volumes or grain are processed daily.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JAS SMITH 6" ROLLER MILL 4KW 3 PHASE MOTOR (APPROX 2.5 TPH)

Features:
100 HP multi speed gearbox (540 RPM).
1880mm working width.
42 x L blades total.
Side gear drive.
CE safety guards.
Rear door with spring & pin adjustment.
Floating front hitches.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 50-100 HP
Working Width (mm): 1880
Working Depth (mm): 100-250
Product Weight (kg): 630
Total Width (mm): 2070
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.88M B103 ROTARY HOE (MIN 50- 100HP)

SXTT750 Spreader - Made in New Zealand.
Particularly well suited to undulating, pugged or soft ground conditions. The TT750's four wheels and oscillating suspension absorbs bumps and eliminates the jarring effect that single axle machines give when towed over rough terrain.
The Ultimate ATV Fertiliser Spreader
Capacity (750L) or (520kg)
Max Spread Width (15m Urea)
Dry Weight (260kg)
Overall Width (1,990mm)
Loading Height (1,500mm)
Optional - 12v Shutter Control (see pictures)
Optional - Side Chute
Optional - Mudguards
Vogal TT750 spreaders feature the 'Easy Lock' drive system. This means drive engagement is by a handle at the front of the spreader which moves the slider to engage or disengage with minimal effort. Steel bash plates protect the drive slider
Includes a greaseable swivel tow coupling. Swivel tow couplings are ideal on undulating and hilly ground to allow the spreader to follow the terrain independently of the towing machine.
Features six fins on the spreading disc to ensure optimal spreading of both powdered products such as Causmag (Magnesium Oxide) and Lime flour along with standard pellet fertilisers.
Dual triangular apertures enable the even spreading of a vast array of fertilisers and also grass seeds.
A Removable agitator that's secured onto the drive shaft via a linch pin. The purpose is to provide an easy way of removing the agitator to enable easy cleaning of the spreaders hopper base.
A heavy duty galvanised frame with extensive gusseting and bracing to ensures high strength and durability for handling large loads of fertiliser on bumpy ground.
The TT750 features an adjustable drawbar to keep the spinner disc level regardless of how high the vehicle tow ball is to ensure even spreading.
The drive line features extra support along the drive shaft/ drive line via two fully greasable and sealed bearings, this reduces load on the gearbox.
All controls and adjustments fare located at the front in and easy to use Index and Control box. This includes a quick reference guide for spreading rates and settings along with the aperture and spinner control levers.
Gearbox protection - stainless steel plates are bolted over the top and around the spinner shaft, between the plates and gear box is an oil soaked felt washer to prevent fertiliser dust getting in the gearbox.
Twin fully oscillating axle suspension absorbs bumps & eliminates jarring effects on undulating & bumpy ground. Ground pressure is also half that of a single axle model. This is extremely helpful in pugged & soft ground.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 750L (EASY LOCK DRIVE) DUAL WHEEL & OSCILLATING SUSPENSION FERTILIZER SPREADER

Medium duty rotary hoe with gear side drive. Suitable for tractors up to 70 hp.
Specifications:
Actual Width: 200 cm
Working Width: 185 cm
Required HP: 55 hp
Weight: 445 kg
No of Blades: 42
Features:
- Rated up to 70 hp
- Four speed gearbox
- 540 rpm
- Gear side drive
- 80 x 7mm 'L' blades
- 220mm working depth
- Side skids
- Adjustable scroll tailgate
- Foot stand
- Slip clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.85M (55-70HP) B SERIES ROTARY HOE

3m Pasture Toppers - 0116
75HP centre gearbox
75HP outside boxes
The high speed Razor Cut pasture topper gives superior sharp, clean cutting promoting pasture rejuvenation. Pasture toppers are designed specifically for topping and should not be used as a slasher or in areas where they may strike stumps or rocks or scalp the ground.
Features:
Available in 10ft three point linkage model only.
Twin rotors fitted to two 75hp end gearboxes and connected by a 75hp centre gearbox.
Heavy Duty PTO fitted with two plate slip clutch.
Very high tip speed provides a cut rivalling many finishing mowers. Timed, deeply stepped twisted blades uplift pasture and allow the topper to evenly spread the cuttings.
Adjustable skids allow easy cutting height adjustment.
Optional 14 Holden wheelkit controls the topping height instead of the skids. Adjusted either via ratchet (standard) or hydraulic ram (optional).
Machine can be operated behind smaller tractors as topping is not high horsepower work.
Fitted standard with front guards to prevent material being thrown forward over the tractor.
Full 12 Month Warranty against faulty materials or workmanship.
Specifications:
Cutting Width 2.9m
Cutting Height (using wheels) 25-200mm
Weight 500kg
Length (Overall) 1.85m
Width (Overall) 3.12m
Headstock Rigid/Floating Top Link
Body Construction 3mm body, 6mm sides
Tractor HP range 35HP+
PTO Series 5 shaft with 2 plate slip clutch
Gearbox/PTO Speed 540rpm
Centre Gearbox 75HP
End Gearboxes 75HP
Gearbox Protection Flexidrive rubber coupling systems with added shearbolt protection.
Tractor Cat Connection Cat 1/2
Options:
0117 Wheel Kit suit 3m (10ft) Pasture Topper 2 Holden Castor Wheels
0118 Hydraulic Ram & Hoses suit 10ft Topper In lieu of ratchet
0119 Hydraulic Ram & Hoses suit 10ft Topper as spare part
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 894 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 5MM DISCS - 0830, SUIT 60-130HP

CELLI 2.5M (80-110 HP) RANGER POWER HARROW

CELLI 2.6M (130-190HP) TIGER ROTARY HOE

JOHN BERENDS GROWMASTER 4000 AERATORS - FOUR ROTOR - 0187

HIMAC EURO HITCH POST RAMMER (45 - 70 LPM)

FARMGARD 2.4M (UP TO 125 HP) HYDRAULIC (3 RAM) CONTRACTOR GRADER BLADE

JAS SMITH 6" ROLLER MILL 4KW 3 PHASE MOTOR (APPROX 2.5 TPH)

BREVIGLIERI 1.88M B103 ROTARY HOE (MIN 50- 100HP)

RATA 750L (EASY LOCK DRIVE) DUAL WHEEL & OSCILLATING SUSPENSION FERTILIZER SPREADER

CELLI 1.85M (55-70HP) B SERIES ROTARY HOE

JOHN BERENDS 10FT PASTURE TOPPERS 75/75HP - 0116, MIN 35+HP

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

Farm Supplies Machinery & Equipment

Dealer Address