Farm Supplies Machinery & Equipment

Trailed air assist Compact Supaflo 1000 litre sprayer with a 93 L/min diaphragm pump, 700mm fan and electric valve controls.
Ideal for narrow vineyards, orchards and trellis tomatoes.
Specifications:
Market: Horticulture. Viticulture
Tank Size (L): 1,000
Connection Type: Trailed
Min PTO HP: 40
Pump Size (L/min): 93
Height / Width / Length (mm): 1500 / 1100 / 2860
Product Weight (kg): 300
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifold. IDS960:93L/min. capacity, 5000kPa pressure. IDS1401:135L/min. capacity, 5000kPa pressure.
Fan Size: 700mm axial flow type, 8 bladed fan (or 800mm with 10 blades) with curved nylon reinforced blades and protective mesh cover.
Nozzles: Flip-over type for dilute/concentrate spraying. Ceramic HCI nozzles. 12 double sided nozzles (6 per side) twist on/off (7 per side on 800mm fan).
Gearbox: Single-speed with neutral position, oil-bath type.
Controls: 40 Bar electric section valves, master valve, electric pressure regulator and in-cab controls.
Main Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip-top easy open lid, 40mm drain valve.
Flush Tank: 80L flush tank with top fill. Used to flush pump, filter, spray lines and nozzles.
Hand Wash Tank: 15L fresh water hand wash tank.
Frame: Galvanised steel with jockey wheel and adjustable drawbar.
Agitation: Pump bypass plus venturi agitator.
Pressure Gauge: 100mm, 0-60 bar glycerine filled gauge with bar increments.
Filtration: Lid strainer and suction line filter.
Wheel Equipment: 50mm axle with 15" tubeless tyres on painted rims (speed rating 30 km/h).
PTO Driveshaft: Quality driveshaft with quick release pins and safety cover.
HP Required: Minimum 40 PTO HP.
Options:
- IDS1401 pump, 135L/min. capacity, 5000kPa pressure,
- 800mm fan (in lieu)
- Two-sided deflector (700mm fan)
- Two- sided conveyor (700 + 800mm fan)
- Bottom air deflectors
- Wide axle (1650mm)
- Bravo 180S automatic rate controller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1,000L COMPACT SUPAFLO TRAILED SPRAYER

The Nobili VKD series mulchers are a medium duty, multi-purpose machine ideal for vineyard and orchard mulching, and for road side mulching by councils.
An adjustable tailboard is fitted for maintenance. A finer mulch is produced with two mulching bars, a restrictor bar and rakes. The VKD has side shift to the right with optional hydraulic side shift and height control is by an adjustable full width roller.
Features:
Suggested Use: Grass and green prunings up to 80mm diameter.
Construction: Low profile body, adjustable tailboard, two mulching bars and one restrictor bar.
ControlL: Manual side shift with optional hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty gearbox fitted with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I and II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Blades (Cast Hammers): 20
Tractor HP: 65-100 HP
Working Width (mm): 1906
Product Weight (kg): 600
Width / Depth / Height (mm): 2040 / 1075 / 510
Options:
Hydraulic Side Shift
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 1.9M VKD ORCHARD MULCHERS (65-100HP)

Trailed 2000 litre Turf sprayer with 121 L/min diaphragm pump, direct coupled to 6.5HP Honda motor, manual controls on pump and Pitarm hosereel with fish mouth nozzle.
Specifications:
Market: Turf
Tank Size (L): 2000
Connection Type: Trailed
Pump Size (L/min): 121
Height / Width / Length (mm): 2100 / 1550 / 3500
Product Weight (kg): 400
Application: Turf spraying.
Features:
Pump: Silvan self-priming, oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised body. Direct coupled to 6.5HP Honda motor. BP125/20: 121L/min. capacity 2000 kPa.
Controls: 3 outlet control with pressure regulator mounted on pump. Pressure gauge on control unit.
Tank: 1000/2000L polytuff impact resistant polyethylene construction. Calibrated sight line. Non-spill screw-down lid with breather.
Frame: Galvanised RHS steel construction with jockey wheel.
Agitation: Bypass action and venturi agitator.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Suction line filter & lid strainer.
Wheels: Tubeless 29 x 13.5 - 15" turf tyres with galvanised rims on 1000L unit. Tubeless 31 x 13.5 - 15" turf tyres with galvanised rims on 2000L unit.
Hosereel: 30m of 19mm PVC hose and fish mouth fertiliser nozzle.
Options:
- 6m Field boom
- 6m Hydraulic fold boom
- 8m Field boom
- 8m Devil boom with hydraulic fold
- 10m Field boom
- 10m Devil boom with hydraulic fold (2000L only)
- 12m Devil boom with hydraulic fold (2000L only)
- 10 and 12m Devil boom hydraulic lift
- 16L foam marker (double sided)
- Electric valve controls with pressure regulator and in cab pressure adjustment
- Bravo 180S automatic rate controller
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L TRAILED TURF SPRAYER

Heavy duty hydraulic grader blade for tractors up to 100 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 100 hp
2100mm (7') wide
450kg
Reversible cutting edge
Three way adjustment by pin (tilt, angle, offset)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Adjustable rippers
Models:
INDUSTRIAL 450-M (manual operation)
INDUSTRIAL 450-1 (hydraulic - 1 ram)
INDUSTRIAL 450-2 (hydraulic - 2 ram)
INDUSTRIAL 450-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.1M (UP TO 100 HP) MANUAL INDUSTRIAL GRADER BLADE

Heavy duty hydraulic side shift mulcher, for tractors from 75-90hp. Ideal for mowing grass and mulching pruning's up to 70mm in diameter (Vineyards and Orchards etc).
Specifications:
Actual Width: 268cm
Working Width: 250cm
Required HP: 75-90hp
Weight: 725kg
No of Blades: 22
Features:
90hp Rated gearbox
Integrated over-run clutch
2 Internal counter combs
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
Hydraulic side shift
540rpm PTO
Front protection flaps
Flat hammer flails
Parking support
Options In lieu of standard:
Rear collection spikes (each) (150 = 11, 175 = 13, 200 = 15, 225 = 17, 250 = 19)
Set of steering wheels in lieu of roller
Manual offset by threaded bar (in lieu of hydraulic)
Y flails in lieu of hammer flails
Models:
MIZAR/S150 150cm Working Width 50-90hp 530kg 14 Blades
MIZAR/S175 175cm Working Width 60-90hp 585kg 16 Blades
MIZAR/S200 200cm Working Width 65-90hp 635kg 18 Blades
MIZAR/S225 225cm Working Width 70-90hp 685kg 20 Blades
MIZAR/S250 250cm Working Width 75-90hp 735kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (90HP GEARBOX) MIZAR/S LOW BODY MULCHER

Medium duty power harrow for tractors up to 110 / 130hp.
Suitable for small agricultural applications.
Specifications:
Actual Width: 305cm
Working Width: 300cm
Required HP: 85-110hp
Weight: Cage roller - 860kg, Packer roller - 980kg
No of Blades: 24
Features:
Rated up to 110hp
324 rotor speed
540 rpm
Category two linkage
Manual depth control
Rear levelling bar with winder control and indicator
285 x 90 x 12mm tines
285mm working depth
45 degree sliding side plates
Shearbolt safety on driveshaft
Greasable top bearings
Specifications:
Actual Width: 255cm
Working Width: 250cm
Required HP: 80-110hp
Weight: Cage roller - 770kg, Packer roller - 880kg
No of Blades: 20
Features:
Rated up to 110hp
324 rotor speed
540 rpm
Category two linkage
Manual depth control
Rear levelling bar with winder control and indicator
285 x 90 x 12mm tines
285mm working depth
45 degree sliding side plates
Shearbolt safety on driveshaft
Greasable top bearings
Accessories:
Hydraulic kit for roller adjustment
Four speed gearbox (540 / 1000 rpm) - rated to 130hp
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
RANGER250 250cm Working Width 80-110HP 20 Tines
RANGER300 300cm Working Width 85-110HP 24 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3M (85-110 HP) RANGER POWER HARROW

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1575kg
No of bearings: 6
No of axles: 2
Cutting width: 2.06m (6ft 9inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 6MM DISCS - 0840, SUIT 60-130HP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60-130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

Multi purpose fixed mulcher, for tractors from 45-70hp. Ideal for mowing grass, set-aside and medium size pruning's up to 50mm diameter.
Specifications:
Actual Width: 168cm
Working Width: 150cm
Required HP: 45-70hp
Weight: 425kg
No of Blades: 14
Features:
70hp Rated gearbox
Integrated over-run clutch
Fixed counter blades
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 Belt side transmission
2 Position headstock for offset or centre mount operation
540rpm PTO
Front protection flaps
Flat hammer flails
Options In Lieu of Standard:
Rear collection spikes (each) (125 = 9, 150 = 11, 175 = 13, 200 = 15)
Set of steering wheels in lieu of roller
Y flails in lieu of hammer flails
Models:
VEGA/F125 125cm Working Width 4-70hp 390kg 12 Blades
VEGA/F150 150cm Working Width 45-70hp 450kg 14 Blades
VEGA/F175 175cm Working Width 50-70hp 500kg 16 Blades
VEGA/F200 200cm Working Width 60-70hp 550kg 18 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.5M (70HP GEARBOX) VEGA/F MULTI PURPOSE MULCHER

Features:
Spring loaded rollers
Heavy duty gearboxes
Heavy duty bearing assembly
Rare earth magnets to help remove metallic objects
Hardened grooved rollers
Heavy duty galvanized frame
No chains, sprockets or v. belts
Optional differential drive using electronic inverter technology
Roller speed can be altered to enhance milling of small grains
These units do not include wiring. Electrician will need to hard wire at your location.
4", 5", and 6" Auger Options:
3m
4m
5m
6m
7m
8m
9m
10m
12m
Custom Design
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BAMAWM SINGLE PHASE ELECTRIC 10" ROLLER MILL

Heavy duty slashers designed for tough conditions.
Features:
- Fitted with solid rubber tyres. Puncture proofing is available.
- Twin rotors fitted to two 75HP end gearboxes and connected by an extra heavy 110HP centre gearbox. Two-plate slip clutch between each gearbox provides gearbox protection.
- Contra rotating rotors form a flat windrow behind the centre of the slasher, however, two small windrows can be created by reversing the direction of the rotors.
- Front and rear chains can be fitted on request.
- Full 12 month warranty against faulty materials or workmanship.
Specifications:
3PL
Cutting width 3.5m
Weight 975kg
Width (overall) 3.72m
Body construction: 5mm top, 6mm sides
Tractor HP range 70HP+
PTO Series 7 Shaft
Gearbox/PTO speed 540rpm
Centre Gearbox 110HP
End Gearboxes 75HP
Gearboxes Protection 2 Plate Slip Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

The Munro AutoDriver is the machine of choice for contractors, vineyard operators and government departments. Available in this model 730, 900 or a 1300 version. 730 means 730 Joules (impact) of energy up to 950 times per minute.
Capable of installing posts up to 8ft (Standard) and 11ft (TeleSett), the AutoDriver combines, in one machine, a fast action rock-breaker style hammer that does not leave the top of the post when driving and an hydraulic auger for drilling pilot holes.
The AutoDriver has a patented down force system that can add a percentage of the tractor mass to the driver, making it the most efficient machine on the market. Without this down force system, these types of machines lose most of their efficiency trying to drive the machine up instead of the post down.
The AutoDriver driving function is a one handed operation allowing operators to adjust the machines tilt whilst driving to ensure a straight post. The auger is hydraulically engaged and stowed and can have down force applied.
The system is easy to operate. Its speed and accuracy of setting makes it the most efficient and value-for-money machine on the market.
Combines in one machine, a fast action earth auger for drilling a pilot hole, with a powerful post driver for setting a tight post every time.
Handles all types of posts with ease...
Steel
Star
Treated pine
Concrete
Split
Square
Round
Railway sleepers
Powerful, Flexible, Tough
The safest and most efficient machine on the market
Automatic hammer does not leave the top of the post.
Single handed hammer and combined down force operation
Hydraulically engaged auger
Hydraulic reversible auger drive with a wide range of augers for different post sizes and ground conditions.
Drills to 1200mm (4)
Forward, aft and sideways tilts combined with a wide base and two separate stability pads allows safe and efficient operation on hills or sloping ground.
Precise ergonomically located controls allow posts to be set quickly and accurately without fuss.
Has low overall height but still copes with normal posts
Firm and Fast post setting, with feather touch controls
Comes in telescopic version for taller posts
Optional Items include...
TAD (Tractor Added Down force to deliver full energy
Power Pack Kit with Oil Cooler
Side Shift
Double Side Shift
Guide Rings per ring
FenceMate Hydraulic wood borer
Skid Steer attachment plate
Guide ring carrier
FEL mounted wire winder (Euro Hitch)
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO (35-45 LPM) AUTODRIVER STANDARD POST DRIVER

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 894 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 1,000L COMPACT SUPAFLO TRAILED SPRAYER

NOBILI 1.9M VKD ORCHARD MULCHERS (65-100HP)

SILVAN 2,000L TRAILED TURF SPRAYER

FARMGARD 2.1M (UP TO 100 HP) MANUAL INDUSTRIAL GRADER BLADE

CELLI 2.5M (90HP GEARBOX) MIZAR/S LOW BODY MULCHER

CELLI 3M (85-110 HP) RANGER POWER HARROW

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 6MM DISCS - 0840, SUIT 60-130HP

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

CELLI 1.5M (70HP GEARBOX) VEGA/F MULTI PURPOSE MULCHER

BAMAWM SINGLE PHASE ELECTRIC 10" ROLLER MILL

JOHN BERENDS TWIN ROTOR SLASHERS 3.6M - 0114, 70+HP

MUNRO (35-45 LPM) AUTODRIVER STANDARD POST DRIVER

Farm Supplies Machinery & Equipment

Dealer Address