Farm Supplies Machinery & Equipment

Remote controlled 12V retractable hose reel skid sprayers. Including a turbo spray gun which comes standard with all skid sprayers.
Ideal for spot spraying - and for fitting to utilities, UTV, trucks and trailers sizes include 300, 400 (this sprayer) and 600 Litre tank capacities.
Available with remote control hose reels and a range of engine driven Silvan diaphragm pumps.
Specifications:
Tank Size (L): 400
Max Pressure: 38 L/min open flow 40 Bar / 580 psi
Features:
- available in 300L, 400L (baffled) and 600L; fitted to galvanised skid
- Australian made remote control hose reel
- Honda engine and comet APS41 pump
- 38 L/min (open flow) 40 Bar / 580 psi max pressure
- 100m smoothline hose and turbo 400 spray gun
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400L REMOTE CONTROL SKID SPRAYER (SINGLE REEL - ELECTRIC START, C/W BATTERY)

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1700kg
No of bearings: 8
No of axles: 4
Cutting width: 2.3m (7ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 24 INCH 5MM SCALLOP DISCS - 0850, SUIT 75-165HP

Euro Hitch 2.6m Power Claw with three pivots.
Made in New Zealand.
Power Claw Features:
- Good for: rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more
- Exceptional clamping force
- 16mm super high strength tines
- Made with industry leading AR450 grade steel tines!
- Opens to 1.3m between tine points
- Superior alternative to a stick rake
- Supplied with FREE storage stand
Price includes euro hitch as standard unless specified. Other hitches upon request.
Previously known as the Versatile Grapple, this Claw can be fitted to almost any loader or material handler. It must be the most useful tool you can think of because of due to the number of applications & tasks it can be used for. These include - rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more.
The exceptional clamping force and 16mm AR450 Abrasion Resistant super high strength tines make this grapple a true multi tasker. Interlocking tines ensure excellent grip & clamping force.
PC260 specs:
Weight = 580kg
HP required = 130+
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.6M POWER CLAW (130+HP) EURO HITCH

These mounted disc mowers are professional machines, agile in use and made to ensure a high productivity and long life. They are all equipped with the Enocut cutting bar which allows a quick and clean cut. The DM series, with lateral oscillating cutting bars, ensures a uniform cut on all types of terrain.
Rear-mounted disc mower equipped with hydraulic lift, safety release to protect the bar from any obstacles, over running Cardan shaft, protection cover and swath disc.
High quality steel Enocut cutting bar, a system totally manufactured in-house by Enorossi.
Standard Equipment:
- Rotation of discs In pairs combined
- Safety release
- Lightening Spring
- Right swath disc
- Cardan PTO shaft
Working Width = 1,670 mm
Tansport Width = 1,260 mm
Weight = 420 kg
Discs = 4
Blades = 8
Required HP = 50 hp
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ENOROSSI 1.67M DISC (HAY) MOWER (MIN 50HP)

12,500L storage silos suitable for all types of liquid supplements, dry feed and fertiliser storage.
Polymasters Cone Bottom Tanks provide the ultimate storage solution for dry bulk and liquid storage or processing applications.
- Steep 50 degree cone
- Heavy Duty DuraGal frame (other materials available)
- Fork channels integrated into frame
- Ideal for sludge clarification and thickening applications
- Multiple outlet options available Liquid or Dry
- Custom pipework can be installed
Heavy Duty Frame 2,380 Dia x 4,804 H (mm)
- Durable Construction
- A One-Piece tank moulded from UV Stabilised, Food Grade MDPE and mounted to a fully Galvanised support structure.
- Re-locatable
- For ease of repositioning, the support structure incorporates fork channels which allow the silo to be moved with a minimum 2 tonne Fork truck when empty. (For Static Storage with Heavy Duty Frame option only)
- Hinged lid for easy access
- Rodent and weatherproof
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 12,500L CONE BOTTOM TANK (DRY OUTLET)

Features Include:
220HP two speed gearbox (1000 RPM).
Phased rotors.
Stone protection system.
Leveling bar standard.
Floating side shields.
3900mm working width.
100 300mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF220-400CR Specifications (with Cage Roller)
Connection Type: Linkage
Min Tractor PTO HP: 170-220 HP
No. of Blades: 32
Working Width (mm): 3900
Product Weight (kg): 1610
Total Width (mm): 4000
MF220-400PR Specifications (with optional Packer Roller):
Connection Type: Linkage
Min PTO HP: 170-220 HP
No. of Blades: 32
Working Width (mm): 3900
Product Weight (kg): 1790
Total Width (mm): 4000
Factory Options:
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI MEKFARMER 220 POWER HARROWS 3.9M - BREVIGLIERI - MF220-400CR, MIN 170-220HP

Heavy duty hydraulic grader blade for tractors up to 100 hp. Ideal for general purpose grading, water table cutting, track earthworks and drain maintenance.
Features:
For tractors up to 100 hp
2100mm (7') wide
450kg
Reversible cutting edge
Three way adjustment by pin (tilt, angle, offset)
Foot stand
Angle movement +/-44 degrees
Tilt movement +/- 26 degrees
Offset movement +/- 33 degrees
Adjustable turntable
Options:
Levelling wheel kit
Hydraulic levelling wheel
Models:
Industrial 450-M (manual operation)
Industrial 450-1 (hydraulic - 1 ram)
Industrial 450-2 (hydraulic - 2 ram)
Industrial 450-3 (hydraulic - 3 ram)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARMGARD 2.1M (UP TO 100 HP) HYDRAULIC (2 RAM) INDUSTRIAL GRADER BLADE

Medium duty rotary hoe ideal for market gardening operations.
Suitable for tractors up to 70 hp.
Specifications:
Actual Width: 200cm
Working Width: 185cm
Required HP: 55hp
Weight: 445kg
No of Blades: 42
Features:
Rated up to 70 hp
Four speed gearbox
540 rpm
Gear side drive
80 x 7mm 'L' blades
220mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Models:
B 155 160cm Working Width 45-70hp 405kg 36 Blades
B 180 185cm Working Width 55-70hp 445kg 42 Blades
B 205 210cm Working Width 60-70hp 490kg 48 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.85M (70HP GEARBOX) B ROTARY HOE

Made in Canada
Suits 1,371 (54") - 2,413 mm (95") tyres
Features:
- Efficiently handle large tyres without physical stress, safety risks and additional personnel
- Extended reach gripper and 50° rotation
- 3-arm configuration balances the tyre perfectly
- Industry-certified and engineer-approved
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 2,108 mm
Width = 2,108 mm
Height = 1,219 mm
Teeth Length = 762 mm
Load Capacity = 1,814 kg
Swing - Manual / Sideways
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO TYRE GRABBER (XL) SUITS 1371MM (54") - 2413 MM (95") TYRES

The Q-Catch Mark II Dual vet crush has a dual side squeeze, which is quick and quiet to operate with extraordinary access to the animal.
Suited to a large range of cattle operations including graziers, studs, breeders and back grounding. The Mark II Dual will improve the efficiency of your operation.
Dimensions:
Length = 3,330mm
Height = 2,150mm
Width = 850mm
Weight = 780kg
A cattle crush should be designed for efficiency, safety, and maximum productivity while adhering to proper animal science and low-stress cattle handling practices.
By removing pressure points and ensuring a clear line of sight, a good cattle crush will ensure that cattle do not feel pressured. When cattle are under less pressure and walk through the crush instead of running, it limits injury to both livestock and the producer.
Reducing noise is also a vital part of eliminating cattle stress, and is often overlooked with most livestock equipment. A cattle crush that is quiet keeps the animal calm when working them.
Optional accessories available (see photos) to suit your individual requirements...
PT500 - Trailer
QCMK2EPP - Electric Power Pack
QCMK2PPP - Petrol Power Pack
QCMK2RF - Rubber Floor
QCHDFG - Galvanised Floor
QC920 - Head Holder (nearside)
QC920os - Head Holder - (offside)
CRK - Kit Roof
QCBG7P - Painted Baulk Gate (700 series)
QCBGG - Galvanised Baulk Gate (Q series)
QCBG7G - Galvanised Baulk Gate (700 series)
QCLGP - Lug Posts & Rear Lugs
QCSCD - Lower Collection Door
QCLGP7P - Lug Post Painted
QCLGP7G - Lug Post Galvanised
STBR-1 - Sternum Bar
Spare Parts for these Crushes are also available upon request.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ARROWQUIP DUAL CATTLE CRUSH MK II - OFFSIDE (RIGHT SIDE) PAINTED

Robust and built to withstand the harshest conditions,
These Australian Built water trailers are used in the agricultural, civil, mine, landscaping and government industries for fire-fighting, dust suppression, water cartage.
Features:
- Hot dip galvanised dual axle trailers.
- 6.5HP Genuine Honda-powered Twin Impeller Onga / Pentair pump with electric start.
- Full on-road pack including brakes & LED lights. Compliance plated- road registrable
- Mechanical brakes
- Pump pressure relief bypass system
- Suction return manifold with 6m suction hose
- Trailer mounted toolbox to protect hose
- 36m hose reel & adjustable spray nozzle
- Pull-start & Diesel electric start pump options available.
- Optional dust suppression nozzle kit available
Tank Dimensions (mm): 1,900 L x 1,450 W x 1,200 H
Trailer Dimensions (mm) : 4,460 L x 1,970 W x 1,650 H
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 2,000L TRAILER FIRE FIGHTER PETROL (ROAD REGISTRABLE) ELECTRIC START

Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular crossmembers where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Two-pack paint finish. Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
Unlimited HP oil lubricated Italian gearbox with unbreakable 90mm output shaft with 5 Year Manufacturers Warranty.
Twisted and stepped 75 x 16mm Boron slasher blades create an updraft effect which lifts the grass flattened by the tractor wheels. All bushes are thoroughly hardened.
Made in Australia.
The blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Cat 2 three point linkage as standard.
Specifications:
0100 Warrior 6ft 9in with adjustable skids
Cutting Width 2050 mm
Overall Width 2200 mm
Tractor HP 100+
Cutting Height 25-100mm
Weight 805 kg
Options:
0109 Warrior 6ft 9in with adjustable skids offset.
0108 Wheel Kit suit Warrior 6ft 9in Slasher Solid Rubber Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS WARRIOR EHD SLASHERS 2.1M - 0100. TRACTOR HP100+

Find Farm Machinery For Sale from $10,000 to $50,000. Browse 893 listings from Farm Supplies Machinery & Equipment.

Farm Machinery For Sale from $10,000 to $50,000

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 400L REMOTE CONTROL SKID SPRAYER (SINGLE REEL - ELECTRIC START, C/W BATTERY)

JOHN BERENDS RM80 HD TRAILING OFFSET 20 PLATE 24 INCH 5MM SCALLOP DISCS - 0850, SUIT 75-165HP

RATA 2.6M POWER CLAW (130+HP) EURO HITCH

ENOROSSI 1.67M DISC (HAY) MOWER (MIN 50HP)

POLYMASTER 12,500L CONE BOTTOM TANK (DRY OUTLET)

BREVIGLIERI MEKFARMER 220 POWER HARROWS 3.9M - BREVIGLIERI - MF220-400CR, MIN 170-220HP

FARMGARD 2.1M (UP TO 100 HP) HYDRAULIC (2 RAM) INDUSTRIAL GRADER BLADE

CELLI 1.85M (70HP GEARBOX) B ROTARY HOE

HIMAC EURO TYRE GRABBER (XL) SUITS 1371MM (54") - 2413 MM (95") TYRES

ARROWQUIP DUAL CATTLE CRUSH MK II - OFFSIDE (RIGHT SIDE) PAINTED

POLYMASTER 2,000L TRAILER FIRE FIGHTER PETROL (ROAD REGISTRABLE) ELECTRIC START

JOHN BERENDS WARRIOR EHD SLASHERS 2.1M - 0100. TRACTOR HP100+

Farm Supplies Machinery & Equipment

Dealer Address