Farm Supplies Machinery & Equipment

Manufactured from high quality brass and can be used in conjunction with BSP fittings.
Hose Size = 12.5 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 12.5 MM BRASS HOSE CONNECTOR (NUT & ELBOW)

The Auger Torque Cement Mixer Bowl 180 is perfect for Mini Loaders, Skidsteers and Excavators 1T - 7T.

Fencing tasks over rough ground often require post fixing cement to be mixed in small quantities, however rough terrain can often mean a traditional mixer cant be used.

Auger Torques drill/mix solution changes all that. With the aid of the mixer cradle hitch, the auger can be quickly removed and the mixer bowl attached and locked in place with the standard auger pin. After the concrete has been laid the auger can be replaced for the next post. Simple!

The 180-litre capacity mixer bowl attaches quickly and easily to our earth drills. Skid steer and excavator mount brackets are available, and a mixer bowls is the perfect addition to our Mini Loader Earth Drill range

AUGER TORQUE 180L MIXER BOWL 75MM SQUARE DRIVE

Vertical rear beater muck spreader with large capacity and robust construction. Ideal for agricultural contractors or large scale operations.
Specifications
Overall Length: 743cm
Unladen Weight: 5,100kg
Capacity: 12m³, 10ton
Features:
Vertical rear beaters
- ESP19 on RFC5012
- ESP21 on RF5517 & RF7322
Single axle (RFC5012 & RF5517)
Tandem fixed axle (RF7322)
Large flotation tyres:
- 620 75R 26 (RFC5012 & RF7322)
- 650 75R 32 (RF5517)
Slurry door with seal
2 x 16mm Marine chains
Demount bed slats
Electric in-cab controls
Sprung drawbar (RFC5012 & RF5517)
Hydraulic drawbar (RF7322)
Mudguards (RF5517 only)
Floor rotation indicator (RF5517 & RF7322 only)
Hydraulic jack
Wide angle driveshaft
Hydraulic brakes
Rear lights
Sandblasted, electroplated & powder coated
Bolted ring (RFC5012)
Swivel ring (RF5517 & RF7322)
Integrated hydraulic hoses
Front hose carrier
2-year warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROLLAND 10 TONNE (12M3) ROLLFORCE VERTICAL MUCK SPREADER

JACKY Bulk Bag Splitters provide an easy and smart method for discharging product directly from a bulk bag. Simply lower the bulk bag onto the blade of the Bag Splitter, which cuts the base of the bag open. The bulk bag may be left on the Bag Splitter while the contents are dispensed.
Australian made and owned.
Specifications:
Capacity (kg): 700
Length (mm): 1,250
Width (mm): 1,250
Height (mm): 1,420
Benefits:
- Automatically cuts bulk bags when lowered onto Bag Splitter, allowing easy and hassle-free discharge of Bulk Bags.
- Bag may be left on Bag Splitter until empty to prevent transfer of contents to other storage systems.
- Centre Slide hatch allows precise control of product discharge out of Bag Splitter.
- Helps overcome lifting height problems - Bag Splitta is picked up from underneath.
- The simple operation is quick and relieves liability associated with re-filling bags.
- Blade is removable for safe storage and transport.
- Safe Working Load (SWL) - 1200kg.
- Standard colour Faint Green (Translucent).
- Serial numbering and custom branding available.
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Lid to suit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 1,000L DUMPING DISCHARGE BAG SPLITTER

Control valves regulate spray pressure, direct the flow of spray liquid from the pump to the spray nozzles and bypass excess liquid back to the tank, in most cases through an agitator.
All feature adjustable pressure regulator, glycerine filled gauge, hose connections, mounting kits where applicable, on/off directional valves and bypass lock position.
Features:
To suit BP20/15 Pump (CBP02015)
2 outlet control
Pressure regulator.
Bypass valve
Gauge
19mm inlet/13mm outlet
14 bar/218 psi max pressure
40L/min max flow
Options:
CSN5 Service kit to suit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN CONTROL VALVE - 2 OUTLET - SILVAN - C1204-528

The Deep Tillage plough is designed for shattering compact ground with minimal disturbance to the sub soil. Ideal for ripping hard ground prior to cultivation and for aerating pastures, therefore increasing water absorption & improving the profile of the soil.
Can be used to renovate pastures or for bed renovation. Broad acre application and row cropping. High tensile cast shank assembly with 24 underframe clearance with 1 shear pin protection. Replaceable points and shin guards, also available with tungsten tips.
Optional crumbler rollers also available to help create a level surface and reduce crusting in the surface.
Optional coulters available to reduce surface disturbance in pasture (must be ordered with machine).
Specifications:
Heavy duty 100 x 100 x 9mm tine mounting frame.
High tensile cast shank assembly with 24in (610mm) underframe clearance with 1in shear pin protection. Replaceable points and shin guards also available with tungsten tips.
Breakout force approx. 4000 ft. / lbs.
Tine spacing set at 12in (300mm).
Approx 15HP required per tine.
Adjustable pair of Holden wheel for depth control available as an option.
Optional coulters available to reduce surface disturbance in pasture.
Available in 2, 3, 5, 7, 9 or 11 tine models with other sizes made on request. 2 and 3 tine models are fitted on a single row frame. Trailing units also available.
Optional crumbler rollers also available to help create a level surface and reduce crusting in the surface.
Options:
0327 14in Coulters (must be ordered with machine) priced per coulter unit.
0355 Optional Hydraulic Phasing Cylinders to replace ratchets.
0200 Depth Wheels (Pair Holden) optional normally mounted outside frame.
0352 5 Tine Crumbler (ratchet adjustment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS DEEP TILLAGE PLOUGHS 5 TINE - 0320, MIN 75HP

Linkage turbomiser Airboom sprayer with 140 L/min centrifugal pump, 550mm fan, 7m or 12m hydraulic fold Airboom and 15 or 18 fishtail air shear spray outlets. Ideal for row crops like strawberries and vegetables.
Note: Infield images are shown feature 12m Airboom.
Specifications:
Market: Horticulture.
Tank Size (L): 600
Connection Type: Linkage
Min PTO hp: 70
Pump Size (L/min): 140
Height / Width / Length (mm): 1500 / 1700 / 5400 (when folded)
Product Weight (kg): 400 (dry)
Application: Strawberries, row crop
Features:
Pump: CD32 centrifugal pump, 140L/min. constructed from toughened nylon. Stainless steel shaft & viton/ceramic seal
Boom Options: GTMP55N07: 7m hydraulic fold - 15 fishtail air shear spray outlets. GTMP55N12: 12m hydraulic fold - 18 fishtail air shear spray outlets.
Boom Arm: Each arm can be independently folded for turning at row end, 640 mm height adjustment to boom with hydraulic ram, safety break away action
Fan Size: P55DS: 550mm dia. turbine fan, 3700 rpm. Power consumed 50 kw / 70HP.
Nozzles: Low volume fishtail outlets, spacings and angle fully adjustable, ideal for row crops
Controls: Electric 3 section valves with on/off, in cab control box and manual pressure adjustment.
Transmission: Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub and oil bath housing.
Frame: Galvanised RHS steel frame, cat II lift pins with 2 positions.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lids, hydro chemical mixer in larger basket, lids with basket strainers, separate in-built 18L fresh water hand wash tank.
Agitation: Bypass and pneumatic
Filtration: Lid strainer and suction line strainer
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 70 PTO HP
Options:
- Bravo 180S automatic rate controller (GT-24)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 600L P55DS LINKAGE AIRBOOM TURBOMISER - 7M HYDRAULIC FOLD (MIN 70PTO HP)

The Rubber Series range of Climaxx Ramps are built for use with pneumatic [air filled] tyres, and Multi-Terrain Loader rubber tracks. The unique tread surface of this range has been designed to obtain the highest possible strength and the lightest possible weight, together with a smooth, safe ride.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Government Departments or any application where wheeled, and rubber tracked machinery must be transported safely and effectively.
Featuring the next lowest Ramp weights after the ATV Series & Mower Series whilst maintaining Surewelds full level of quality, select from this range where Ramp weights are critical and machinery with pneumatic tyres or rubber tracks is to be loaded.
Where steel tracks are to be used on Ramps, please refer to the T Series which have a different tread surface to the Rubber Series. Please see the table below, for SureWelds full range of Rubber Series Ramps.
Specifications:
Rated Capacity: 3,000kg
Ramp Mass: 12kg
Ramp Length: 1.6m
Track Width (internal): 350mm
Ramp Width: 440mm
Ramp Depth: 90mm
Features:
Tread Surface of Rubber Series Ramps.
Steel Pin Connection.
Foot adaptable to varying gradients.
Models:
6/1524R - 1,500kg Rated Capacity, 16kg Ramp Mass, 2.4m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/1533R - 1,500kg Rated Capacity, 22kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/1929R - 1,900kg Rated Capacity, 18kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/3016R - 3,000kg Rated Capacity, 12kg Ramp Mass, 1.6m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/3029R - 3,000kg Rated Capacity, 24kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3033R - 3,000kg Rated Capacity, 27kg Ramp Mass, 3.3m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3635R - 3,600kg Rated Capacity, 33kg Ramp Mass, 3.5m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 120mm Ramp Depth
7/4040R - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536R - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833R - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 1.6M, 3,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

Handy little scoop, 20ml one end, 50ml the other. Use for any chemicals, liquids or powders.
12cm overall length.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF 50ML / 20ML MEASURING SCOOP DOUBLE END

This device was originally developed in England in the 1840s, by one John Kilner. The product is essentially the same device as it was then. Turning by hand at a reasonable speed for 10 minutes can chrun 300ml of good double cream into 115gm of butter.
Salt or flavour to your own desires.
Glass jar is 1L capacity.
Instructions included.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF 300ML MANUAL KILNER

RM40 24 Plate Heavy Duty Trailing Offset 0824
The RM40 is one of the most popular of our wide range of offset and tandem disc cultivating ploughs.
Features:
Great digging ability ideal for primary and secondary tillage using 40Hp to 90HP tractors.
Twin pressure screws each side can be adjusted individually.
Easy gang adjustment for the perfect level finish.
Solid cast spools individually machined to suit the disc for extra strength.
Triple sealed bearings.
230mm (9 inch) disc spacing.
Fitted with 560mm x 5mm (22 inch x 3/16 inch) scalloped discs.
28mm square high tensile gang bolts.
Weight where it counts in the gang not ballast on the frame (which adds load to the bearings) like most other machines.
Prong type scrapers are standard equipment formed scrapers available on request.
Fully adjustable drawbar adjustable offset ideal for orchards.
Fitted with Holden type tyres.
Specifications:
Approx Weight 1230kg
No. Bearings 8
Cutting Width 2.74m (9ft)
No. Axles 4
Options:
0951 Optional Jack
0953 Optional Furrow filler (not sold separately)
* Upgrade to 24 inch x 5mm discs POA

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM40 24 PLATE HEAVY DUTY TRAILING OFFSET - 0824, SUIT 40-90HP

Made in Australia
Features:
- Heavy duty load guard
- Easy hook up with no hinging tynes
- Adjustable latch locked tynes - fixed at top and bottom to prevent bouncing
- Notch positions for multiple tyne spacing's
- Lifting capacity = 2,500 kg
- Tyne size = 40 mm x 100 mm
- Tyne length = 1,070 mm
- Weight = 165 kg
Note: 3PL Pallet Forks come standard with bottom linkage pin set 100 mm above ground level
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC CAT II 3PL PALLET FORKS (2,500 KG)

Find Farm Machinery For Sale. Browse 7626 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 12.5 MM BRASS HOSE CONNECTOR (NUT & ELBOW)

AUGER TORQUE 180L MIXER BOWL 75MM SQUARE DRIVE

ROLLAND 10 TONNE (12M3) ROLLFORCE VERTICAL MUCK SPREADER

JACKY STORAGE 1,000L DUMPING DISCHARGE BAG SPLITTER

SILVAN CONTROL VALVE - 2 OUTLET - SILVAN - C1204-528

JOHN BERENDS DEEP TILLAGE PLOUGHS 5 TINE - 0320, MIN 75HP

SILVAN 600L P55DS LINKAGE AIRBOOM TURBOMISER - 7M HYDRAULIC FOLD (MIN 70PTO HP)

SUREWELD 1.6M, 3,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

SHOOF 50ML / 20ML MEASURING SCOOP DOUBLE END

SHOOF 300ML MANUAL KILNER

JOHN BERENDS RM40 24 PLATE HEAVY DUTY TRAILING OFFSET - 0824, SUIT 40-90HP

HIMAC CAT II 3PL PALLET FORKS (2,500 KG)

Farm Supplies Machinery & Equipment

Dealer Address