Farm Supplies Machinery & Equipment

Building a temporary stockyard for larger livestock? Our heavy duty cleats will secure your panels together with minimum hassle.
Our range of zinc plated heavy duty cleats are made of quality steel for a strong and durable panel clip.
You have two types of panel clip shapes to choose from: L shaped clips and C shaped clips. These two options enable you to create a variety of clip combinations for your needs. Just slide a 16mm drop pin through the holes and your panels will be secure.
Each shape has a 40mm wide and 50mm wide options. The 40mm wide clips are a perfect fit for 40mm RHS, without any overhang. The 40mm panel clips can also be used on a 50mm RHS if you want to weld onto the flat rather than the corner of your RHS. The 50mm is perfect if you want a clip to be flush with the sides of your 50mm RHS.
Each panel clip comes with a backing plate, making it easy to weld.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 2+.
Specifications:
- 50mm width
- 100mm height
- C shape
- 16mm drop pin
Features:
- Strong
- Easy to use
- Easy to weld
- Secure
- Less noise when installed correctly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 50MM 'C' TYPE PANEL CLIP - CP50ZP

Specifications:
Height / Width / Depth = 640 mm / 835 mm / 1,010 mm
Lid Diameter = 255 mm
Weight: 22kg
Features:
- Strong UV stabilised polyethylene
- Lightweight, strong construction
- Impact resistant
- Spill proof lid 120mm diameter
- Chemical resistance
- Calibrated volume sight lines
- Smooth easy to clean interior surface
Optional:
430-115: Fork Skids
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 250L SQUATPAK TANK (BARE)

Made in Australia
Features:
- Tynes angled at front edge allow larger volume to be collected, while reaching over debris piles, without disturbing the ground
- Max Opening 800 mm
- Dual independent grapples, cylinder covers
- Greasable pivot points
- 200 mm tyne spacing's
- Inc hoses, fittings & couplings
- Suitable for Extreme Duty
Dimensions:
Suits: 120 - 180 hp
Max Opening = 800 mm
Tyne Spacing's = 200 mm
Tyne Diameter = 16 mm
Max Width = 2,350 mm
Weight = 520 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH DOUBLE CLAW BUSH GRAPPLE (2,350 MM)

Series 38 Manual winch rigid frame with 2 section rigid S08 Stump Jump Harrow. 1.72m. Transport width: 1.79m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 1.72M (2 SECTION) RIGID FRAME STUMP JUMP HARROW

Made in Canada
Suits 1,371 (54") - 2,413 mm (95") tyres
Features:
- Efficiently handle large tyres without physical stress, safety risks and additional personnel
- Extended reach gripper and 50° rotation
- 3-arm configuration balances the tyre perfectly
- Industry-certified and engineer-approved
- Euro Hitch standard. Other hitches available at cost
Dimensions:
Length = 2,108 mm
Width = 2,108 mm
Height = 1,219 mm
Teeth Length = 762 mm
Load Capacity = 1,814 kg
Swing - Manual / Sideways
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO TYRE GRABBER (XL) SUITS 1371MM (54") - 2413 MM (95") TYRES

Easily adjustable grader blade designed for road maintenance, fire breaks, scrub clearance and general farm work.
Features:
Hydraulic offset (3 ram model) or manual offset (2 ram model - 0028) also available
Up to 45 degree hydraulic angle adjustment both ways.
Exclusive patented swivel assembly gives superior strength and reliability and eliminates pivot pin stress often seen in other brands.
Hydraulic tilt.
14in Holden depth wheel makes grading roads an ease.
Has 360 degree rotation.
Available in manual or hydraulic adjustment.
Curved 10mm reinforced mouldboard with heavily gusseted corners for strength where it counts.
Strong bearing support make this one of the best wheelkits on the market.
Hardened reversible cutting edge.
Blade can be reversed for back blading work.
Cat 2 hitch as standard.
Other linkage and quickhitch options on request.
Optional diverter kits (electric or manual) are available to allow 3 ram models to be used on tractors with one single/dual remotes.
Patented Turntable no pivot pin.
Quality Eaton cylinders used.
Tilt 3in x 10in
Angle/offset (8ft model) 3in x 12in.
Angle/offset (10ft model) 3 1/2in x 12in.
Also Available:
0014 8ft Hydraulic Grader Blade 2 Ram
0013 8ft Hydraulic Grader Blade -3 Ram
0028 10ft Hydraulic Grader Blade 2 Ram
Options:
0026 Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link
0027 Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses
0400 Boxed ends
Diverter Options:
0179 Manual diverter converts 2 pair of hoses into 1 pair of hoses
0180 Electric diverter converts 2 pair of hoses into 1 pair of hoses no wiring supplied
0181 Electric diverter converts 3 pair of hoses into 1 pair of hoses no wiring supplied
* Diverter prices reflect the costs when ordered with the machine. All diverter kits are bolted to the headstock and include all relevant hoses and fittings. Wiring and switches at the tractor end are not supplied with the electric model.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3 RAM GRADER BLADE HYDRAULIC 10FT (3M) - 0017

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 270cm
Working Width: 250cm
Required HP: 85hp
Weight: 915kg
No of Blades: 22
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

Versatile & Simple Latch. Looking for an easy way to install a simple latch for your personal access gates? Our two way catches are a good lightweight latch for your smaller gates.
Our two way latches are made from zinc plated steel. These lightweight latches allow you to swing a gate closed from either side. When the gate hits the bevelled lug, it pushes the lug up allowing the gate to slide in. Once the gate is in, the lug will drop back down, holding the gate in place.
We dont recommend them for stockyards, however, they are excellent if you need a secure latch for personal access and residential gates.
Price quoted is for one catch.
Discounts apply for bulk purchases of 10+
Specifications:
- 32NB gate
- 94mmW x 118mm L base size
- Zinc plated
Features:
- Easy to install
- Weld-on
- Screw-on
- Rust Resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 32NB TWO WAY CATCH 94X118MM- TWC32

Manufactured from high quality brass and can be used in conjunction with BSP fittings.
Hose Size = 12.5 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 12.5 MM BRASS HOSE CONNECTOR (2 PACK)

The ultimate weapon when it comes to efficiently maintaining your lifestyle block. Pre-cutting is not necessary as branches simply flow through the large inlet chute. The momentum within the cantilevered cutting disk creates a strong draft to discharge high onto a stock pile or trailer.
The Hansa C7 easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.
Features:
Honda GX200 4 stroke petrol engine
Easy start
Heavy duty blades
Pneumatic wheels for easy manoeuvring by hand or by road in a trailer, ute or 4WD
Solid-steel casing
Twin belt drive
Adjustable output chute
Similar noise output to a domestic mower
Minimal cleaning and maintenance required for this garden shredder, mulcher & chipper.
Available in a standard or towbar version
On registration engine four years, chipper two years domestic warranty
Technical Specifications:
Max. chipping capacity: 70mm
Engine: Honda GX200
Max Power: 6.5HP
Fuel tank size: 3.6L
Starting system: Recoil
Inlet chute size: 130 x 150mm
Qty of knives: 2
Knife size: 110 x 42 x 9mm
Knife material: A8 modified tool steel
Cutting disk dimensions: 400 x 10mm
Cutting disk weight: 12.5kg
Cutting disk speed: 2850RPM
Beltdrive: Twin
Self-feeding: Yes
Wheels: 270mm pneumatic
Dimensions: L900 x W650 x H1200mm
Weight: 93kg
Outlet chute height: 780mm
Outlet chute type: Deflector
Optional Add-Ons and Spare Parts:
C7 Towbar Tongue
C7 Towbar Coupling
C7 Bumper
C7 Blades
C7 Anvil
C7 Belts
C7 Cover
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

HANSA C7 CHIPPER 70MM CHIPPING CAPACITY

Adjustable High Back Bale Fork - Made in New Zealand
This model of Bale Fork has been developed to safely handle 2 bales at a time by simply extending the high back adjusters.
High back extends to 1740mm with 1.2m length tines.
A Telehandler spec model is also available.
Tines are forged spring steel, held in with a conus 2 welded taper bush. These high strength bale forks can be made to fit almost any Tractors front end loader or Telehandler
Tine length is from the overall length of the tine, from the nut right out to the point. This means that a 1.2m long tine has around 1,070mm of usable length to spear into a bale. The other 130mm of the tine is inside or behind the backframe.
Measurements are approximate.
Tine Width = 1.2m
Machined Conus 2 Taper Cones
German Forged Spring Steel Tines
Small Centre Tine included
Frame is fully Welded RHS
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA EURO HITCH HIGH BACK BALE FORK (2 BALES)

Cow Lifter Hip Clamp Vink Complete.
Our top-of-the-range hip clamp featuring the double-direction spindle thread for fast closure and release.
Also on this model the handle is removable for safety of man and animal.
Removable handle also prevents clamp being bent during use.
Handle can be used on either side of the hip clamp. All galvanised finish.
Manufactured in the Netherlands by Vink-Elst.
Parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF COW LIFTER HIP CLAMP VINK COMPLETE

Find Farm Machinery For Sale. Browse 7626 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

ROTECH RURAL 50MM 'C' TYPE PANEL CLIP - CP50ZP

SILVAN 250L SQUATPAK TANK (BARE)

HIMAC EURO HITCH DOUBLE CLAW BUSH GRAPPLE (2,350 MM)

MURRAY 1.72M (2 SECTION) RIGID FRAME STUMP JUMP HARROW

HIMAC EURO TYRE GRABBER (XL) SUITS 1371MM (54") - 2413 MM (95") TYRES

JOHN BERENDS 3 RAM GRADER BLADE HYDRAULIC 10FT (3M) - 0017

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

ROTECH RURAL 32NB TWO WAY CATCH 94X118MM- TWC32

SILVAN 12.5 MM BRASS HOSE CONNECTOR (2 PACK)

HANSA C7 CHIPPER 70MM CHIPPING CAPACITY

RATA EURO HITCH HIGH BACK BALE FORK (2 BALES)

SHOOF COW LIFTER HIP CLAMP VINK COMPLETE

Farm Supplies Machinery & Equipment

Dealer Address