Farm Supplies Machinery & Equipment

RCD PACK -3.4 kVA portable generator powered by Honda petrol engine. Featuring Worksafe aproved RCD protected outlets.
Newly designed frame
2 x 15 Amp IP56 RCD protected outlets
With these features, using your gentech generator on a work site will be a breeze. The RCD protected outlets are work safe approved and comply with Australian Standards. This hard working, light weight generator is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).
Specifications:
Power Rating: 3.4 kVA
Model Rating 0.8pf @ 50Hz: 3.4kVA
Engine Model: Honda GX200
Phase: 1-Phase
Starting System: Recoil
Noise Level @ 7m: 67 dBA
Outlets: RCD protected 15Amp
Approx. Fuel Consumption @ 80% Load: 1.34 L/hr
Operation Hours @ 80% Load: 2.32 hrs
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 3.4 KVA RCD PETROL GENERATOR

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BALE FRAME - 2 X M22 X 1,100MM

Cross Shaft Bush.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BUSH (CROSS SHAFT)

Lower Link Weld On Ball End.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK WELD ON BALL END (CAT 2) (102MM WORKING LENGTH, 28.5MM ID)

PTO Yoke - Quick Release.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO YOKE - QUICK RELEASE (U/J SIZE: 30, 2 X 106, 5MM) - SIZE: 1 3/8" (21 SPLINE)

Sweep specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SWEEP - 180 X 8MM

Southern Cross 5ft Slasher - 35-75hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.5mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 75HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
- 3 Year Gearbox Warranty
- Bare-Co 8 inch slip clutch
- Bare-Co Series 6 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (one wheel kit is recommended for the 5ft
slasher)
Specifications:
- Recommended Tractor (HP) - 35-75
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 80
- Deck Thickness (mm) - 3.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/75HP
- PTO Driveline - Bare-CO Series 6 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 8" Slip-clutch included
- Offset: Left & right
- Gross Weight - 341kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT SLASHER - SUIT 35-75HP

Bucket broom - front mounted. 30-75lpm. 100% poly brush. 1600mm wide with 610mm (24inch) polyurethane brush. Standard Flow.
Price inclusions: bucket broom, standard frame, 2.2m hoses and couplers.
The Cleana bucket broom is a quality Australian made forward and reverse bucket broom for skid steer loaders, front end loaders, and telehandlers.
Featuring high performance hydraulic components, a hinged lid for fast emptying, heavy duty wheels, and replaceable bucket wear edge.
A removable side shift frame is available in a variety of widths to suit all machines.
Sweeps & collects.
Sweeps and collects all kinds of debris in factory car parks, road construction, stock yards, shipping containers, and more.
Innovative design.
Our range of bucket brooms feature easy-to-use built-in brush adjustment handles; so no tools are required, as well as a one piece 24" poly brush for longer brush life and easy replacement.
80% poly 20% wire brush also available.
A replaceable cutting edge on the bucket extends the life of the attachment.
Optional extras.
As an optional extra, a side broom sweeper can be attached to the broom and operated through hydraulic lines. This rotating sweeper can be manually set to various operating heights.
Machine suitability.
Suits skid steer loaders, front end loaders, and tele-handlers. Features replaceable machine pickups for multiple machine use. A removable side shift frame is also available in a variety of widths to suit all machines. Need more flow? High flow models also available.
Full range of sizes.
Bucket broom range of sizes available include 1600mm, 1700mm, 1800mm, 2000mm, 2500mm and 3000m.
Specifications:
- Rec Flow Range: 30-75lpm
- Max Pressure: 205 Bar
- Overall Height: 699mm
- Overall Width: 1870mm
- Weight: 397kg
- Bucket Capacity: .29M³
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA BUCKET BROOM - FRONT MOUNTED - 1600MM - BR-000410

Hydraulic Top Link (Cat.2/2) Knuckle and Q.R CBM Hook
Cylinder Bore: 80mm
Min. Length : 680mm.
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK (CAT 2/2) (80MM CYLINDER BORE) (680MM MIN LENGTH)

Hydraulic Top Link (Cat.1/1) Ball and Ball
Cylinder Bore: 50mm
Min. Length : 420mm.
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK (CAT 1/1) (50MM CYLINDER BORE) (420MM MIN LENGTH)

Lower link implement pin (28mm x 149mm)
Thread size 1 1/8'' x 51mm
Cat. 2
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX 28 X 149MM LOWER LINK IMPLEMENT PIN (CAT 2, THREAD SIZE: 1 1/8" X 52MM)

Rigid Stabiliser Bar.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX RIGID STABILISER BAR - 22MM HOLE DIA, 836MM LENGTH

Find Farm Machinery For Sale. Browse 7523 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

GENTECH 3.4 KVA RCD PETROL GENERATOR

SPAREX BALE FRAME - 2 X M22 X 1,100MM

SPAREX BUSH (CROSS SHAFT)

SPAREX LOWER LINK WELD ON BALL END (CAT 2) (102MM WORKING LENGTH, 28.5MM ID)

SPAREX PTO YOKE - QUICK RELEASE (U/J SIZE: 30, 2 X 106, 5MM) - SIZE: 1 3/8" (21 SPLINE)

SPAREX SWEEP - 180 X 8MM

SOUTHERN CROSS AG MACHINERY 5FT SLASHER - SUIT 35-75HP

DIGGA BUCKET BROOM - FRONT MOUNTED - 1600MM - BR-000410

SPAREX HYDRAULIC TOP LINK (CAT 2/2) (80MM CYLINDER BORE) (680MM MIN LENGTH)

SPAREX HYDRAULIC TOP LINK (CAT 1/1) (50MM CYLINDER BORE) (420MM MIN LENGTH)

SPAREX 28 X 149MM LOWER LINK IMPLEMENT PIN (CAT 2, THREAD SIZE: 1 1/8" X 52MM)

SPAREX RIGID STABILISER BAR - 22MM HOLE DIA, 836MM LENGTH

Farm Supplies Machinery & Equipment

Dealer Address