Farm Supplies Machinery & Equipment

7 kVA portable welder/generator powered by Honda petrol engine with electric start.
This generator is the workers choice, featuring 7 kVA of real grunt and up to 200 Amps of welding power for exceptional performance to keep you working until the job is done.
Specifications:
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil/E-Start
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Welder: 200 Amp
Duty Cycle: 60%
Approx. Fuel Consumption @ 80% Load: 2.44 L/Hr
Operation Hours @ 80% Load: 2.5 hrs
Optional Extras:
10-WELD LEADS-08 - 8MTR kVA, Heavy duty leads, clamps, electrode holder suits both 200A and 230A models.
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WELDER PETROL GENERATOR (ELECTRIC START)

Rotavator Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROTAVATOR BLADE (LH) 50 X 12MM

Top link pin & chain.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK PIN & CHAIN (CAT 2) (25MM PIN DIA, 142MM WORKING LENGTH)

The Digga Cement Mixer can mix anything from cement to fertilizer, it fits quickly and easily to your Digga Planetary Auger Drive. Auger Drive sold separately.
Inclusions - Mixer bowl and hub, drive cradle, foot pin and clip. Purchase frame cradle separately (required).
Features:
- Easy connection: Simply pin cradle to existing auger frame and add mixer bowl. Change from drilling to mixing in under 2 minutes.
- Cement mixing attachment to suit Digga auger drives and frames only.
- Suit: Skid Steer Loaders, Mini Loaders and Tele-Handlers.
- Suits all Digga Auger Drives, Mini Auger Drives and auger drives fitted with Swing Control System.
- New Design with easy connection.
- Maintenance-free.
- Manufactured from quality materials.
Specifications:
Total Capacity * - 110L
Struck Capacity ** - 69L
65mm Round Hub
Length - 1202mm
Width - 1212mm
Height - 1324mm
Width (Bowl Only) - 610mm
Weight Complete with PD3 & Frame - 158 kg
Weight (Bowl and Cradle Only) - 38 kg
(*) An upright position depicts total capacity.
(**) Maximum struck capacity is measured at an angle of 45 degrees. See diagrams.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 110L CEMENT MIXER (WITH 65MM ROUND HUB)

PTO Universal Joint specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO UNIVERSAL JOINT - 36 X 89 & 32 X 106MM (STANDARD DUTY)

Round Countersunk Square Hex Bolt & Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX ROUND COUNTERSUNK SQUARE HEX BOLT & NUT - 1/2" X 45MM

PTO Over-Running Clutch.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO OVER-RUNNING CLUTCH (U/J SIZE: 32 X 76MM) - ANTI CLOCKWISE

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE FLAT - 109 X 40 X 3MM (RH & LH) - REPLACEMENT FOR TAARUP

Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX METRIC HEXAGON NUTS - M8 X 1.25MM (PACK OF 4)

600MM RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

RASSPE RADURA MOWER BLADE TAPERED - 131 X 50 X 4MM (RH & LH) - REPLACEMENT FOR TAARUP

Hydraulic Motor.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BATTIONI HYDRAULIC MOTOR (SUITS MEC2000H TO MEC8000H)

Find Farm Machinery For Sale. Browse 7588 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

GENTECH 7 KVA WELDER PETROL GENERATOR (ELECTRIC START)

SPAREX ROTAVATOR BLADE (LH) 50 X 12MM

SPAREX TOP LINK PIN & CHAIN (CAT 2) (25MM PIN DIA, 142MM WORKING LENGTH)

DIGGA 110L CEMENT MIXER (WITH 65MM ROUND HUB)

SPAREX PTO UNIVERSAL JOINT - 36 X 89 & 32 X 106MM (STANDARD DUTY)

SPAREX ROUND COUNTERSUNK SQUARE HEX BOLT & NUT - 1/2" X 45MM

SPAREX PTO OVER-RUNNING CLUTCH (U/J SIZE: 32 X 76MM) - ANTI CLOCKWISE

RASSPE RADURA MOWER BLADE FLAT - 109 X 40 X 3MM (RH & LH) - REPLACEMENT FOR TAARUP

SPAREX METRIC HEXAGON NUTS - M8 X 1.25MM (PACK OF 4)

DIGGA 600MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

RASSPE RADURA MOWER BLADE TAPERED - 131 X 50 X 4MM (RH & LH) - REPLACEMENT FOR TAARUP

BATTIONI HYDRAULIC MOTOR (SUITS MEC2000H TO MEC8000H)

Farm Supplies Machinery & Equipment

Dealer Address