Farm Supplies Machinery & Equipment

Features:
- Vertical fold to 3m for road transport
- 200 x 120 x 10mm chassis
- 200 x 120 x 8mm gang beams
- 28.7 (730mm) scalloped discs (8mm thick)
- Disc scrapers
- 10.6 (270mm) disc spacing
- 14 double taper roller bearings with a 5 year warranty
- Reinforced bearing protectors
Heavy duty vertical folding offset discs, ideal for large cropping applications. High quality French manufactured with a 5 year bearing warranty.
Working Width = 5,700 mm
Transport Width = 3,000 mm
Required HP Range = 250 - 350 hp
Weight = 5,605 kg
Number of Discs = 44
Options available:
- Hydraulic fore/aft adjustment
- Hydraulic gang angle adjustment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GB 5.7M HEAVY DUTY OFFSET DISCS - 44 DISCS (250-350HP)

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3980kg
No. of Bearings: 20
No. of axles: 8
Cutting width: 5.26m (17ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 24 INCH DISCS - 0976

Rippers enable you to do a lot of hard work with minimum effort. Ideal for breaking up hard ground, ripping up stumps or rock, planting trees, laying polythene pipe or removing rabbit warrens.
Using the popular standard ripper tines, this versatile machine is ideal for general ripping of large areas.
Features:
Standard 1.8m wide frame.
Approximately 20hp per tine requirement depending on soil conditions.
12 month warranty.
Specifications:
Cat 1 and 2 Linkage.
Heavy duty 125 x 125 x 9mm RHS main frame.
150 x 25 Heavy duty tines.
Adjustable tine height and width.
Reversible point 75mm x 16mm.
860mm under frame clearance.
Mounting stand
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3 TINE MULTI TINE RIPPERS - 0133

Features:
- 150 x 100 x 8mm chassis
- 200 x 120 x 8mm gang beams
- 28 (710mm) scalloped discs on this CVH-71 model (8mm thick)
- Disc scrapers
- 10 (260mm) disc spacing
- Eight double taper roller bearings with a 5 year warranty
- Reinforced bearing protectors
- Manual gang angle adjustment from 8 - 24 degrees
- Manual fore/aft adjustment with spring
- 40mm square silicon manganese steel disc axles
- 400 / 60 x 15.5 flotation tyres
- Swivel hitch
Super heavy offset discs for demanding agricultural and cropping applications. High quality French manufactured with a 5 year bearing warranty.
Working Width = 3,500 mm
Overall Width = 3,750 mm
Required HP Range = 180 - 240 hp
Weight = 2,930 kg
Number of Discs = 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GB 3.5M, 28 DISCS (180-240HP) HEAVY DUTY OFFSET DISCS

Series 23 - 2.1m Small Acreage Pasture Harrow.
Designed to be operated via UTV, 4WD or ride on Mower.
Specifications:
- One sided tripod sections
- Available in 0.76m (26) depth
- High Carbon 10mm Square Steel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.1M SMALL ACREAGE PASTURE HARROW - SERIES 23

Specifications:
Working width: 2800mm
Discs: 24
Weight: 2280kg
Features:
Hydraulic gang adjustment ( Separate ram for both gangs)
Manual levelling adjustment (Optional hydraulic)
12.5/80-15 PR14 tyres
Hydraulic drawbar offset (Optional manual)
660mm scollped discs
6mm thick disc blades
230mm disc spacing
8 bearings (double taper roller) GB280-320
12 bearings (double taper roller) GB370
Bearing protectors
40mm square shaft
150 x 100 x 8mm chassis and gang beam
Swivel hitch
Options:
Manual drawbar offset
Hydraulic levelling adjustment
Models:
GB280 2.8M 24 DISCS 2280kg
GB320 2.8M 28 DISCS 2550kg
GB370 2.8M 32 DISCS 2900kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

GB 2.8M, 24 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

RZ Range RLC Leaf Spring Rippers 3m R9-3
Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available. This is the Fixed Frame version.
Specifications
Working Width: 300cm
Required HP: 125-200hp
Rippers: 9
Fixed Frame.
Features
Double clamp bolt-on legs.
Adjustable leaf spring.
Heavy duty 100x100mm box section.
Adjustable rubber depth wheels.
865kg breakout.
Reversible chisel point.
Solid steel legs.
Options
Rear rollers.
Rubber depth wheels (2×600-9)
Wing share.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

Pipe laying attachment up to 65hp. Suits single tyne ripper 85000DC.
Recommended for tractors up to 65hp
Weight: 22kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN PIPE LAYING ATTACHMENT UP TO 65HP GALVANIZED - 85020C

Features:
- 150 x 100 x 8mm chassis
- 200 x 120 x 8mm gang beams
- 28 (710mm) scalloped discs on this CVH-71 model (8mm thick)
- Disc scrapers
- 10 (260mm) disc spacing
- Eight double taper roller bearings with a 5 year warranty
- Reinforced bearing protectors
- Manual gang angle adjustment from 8 - 24 degrees
- Manual fore/aft adjustment with spring
- 40mm square silicon manganese steel disc axles
- 400 / 60 x 15.5 flotation tyres
- Swivel hitch
Super heavy offset discs for demanding agricultural and cropping applications. High quality French manufactured with a 5 year bearing warranty.
Working Width = 4,000 mm
Overall Width = 4,250 mm
Required HP Range = 200 - 250 hp
Weight = 3,100 kg
Number of Discs = 32
Options available:
- Hydraulic fore/aft adjustment
- Hydraulic drawbar adjustment
- Hydraulic gang angle adjustment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GB 4M, 32 DISCS (200-250HP) HEAVY DUTY OFFSET DISCS

Deep ripping is most effective in sandy textured soils where plant roots need to grow deeper to access subsoil moisture.
Deep ripping is of particular benefit when it is used to break through compacted layers, allowing roots to access soil water beneath this layer.
Where root growth is impeded by hard layers, a greater amount of energy is required for roots to grow through compacted soil, therefore production is usually reduced.
After removing the compacted layer by deep ripping, plant roots can grow faster and deeper, increasing the amount water and nutrients available to the crop, resulting in improved yield.
Tips:
Ground must be moist enough to allow ripping tines to penetrate below the compacted layer.
Soil must not be too moist that the ripper tines cause smearing rather than fracturing or shattering of the compacted layer.
Single Shank: (not this model advertised)
Category 2
110hp maximum requirement
Triple Shank:
Category 2 or 3
140hp maximum requirement
Adjustable widths
Both Models Feature:
700mm working depth
30mm shank thickness
Safety shear bolt
Galvanised
Replaceable point
Daken sub-soil rippers are perfect for breaking up compacted and hard soil layers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN CAT II OR III THREE SHANK SUB SOIL RIPPER (MAX 140HP)

Series 35 Forged Tine Levelling Harrow System (Category L) "Extra Heavy" Harrow Sections including optional drawbar.
3 Rank (Length) Deep Harrow Sections (May be used with seeding combines, air seeders, etc.)
Model:
35001 - 9 Tine (3W x 3L deep) 2.3m wide (min) - this listings price. Heavy Duty drawbar options listed below (2.3m - 5.6m wide options).
Note: Picture shown first is 5 Rank (Length).
Information on the Harrow System:
- If you want to level your land and need a Harrow that will stand up to the demands of todays conditions, Murrays manufacture an Extra Heavy Levelling Harrow. Built from heavier High Carbon Steel, each Tine is specially forged revealing a diamond shape designed to level your ground. Tine spacing remains the same as our standard Series 03 version.
- The Series 35 is suitable for heavier clay type soils and is used after primary or secondary tillage. Available in three and four row widths allowing flexibility to build up Harrow Sections to suit the width of your primary machine. 100% Australian made and owned.
Specifications of the Harrow Sections:
- Tine Spacing 76mm (3in)
- Tine length 190mm (7 1/2in) approx.
- Centre to Centre of Front Hooks 235mm (9 3/4in)
Features:
- Forged Tine ends. Manufactured from 25 x 10mm carbon steel.
Heavy Duty Drawbars (only) options:
3074 - 7ft 7in (10 bar anchors) 9kg
3075 - 8ft 5in (11 bar anchors) 10kg
3076 - 9ft 2in (12 bar anchors) 13kg
3077 - 9ft 11in (13 bar anchors) 14kg
3078 - 10ft 8in (14 bar anchors) 15kg
3079 - 11ft 5in 16 row (15 bar anchors) 17kg
3080 - 12ft 2in (16 bar anchors) 21kg
3081 - 13ft (17 bar anchors) 27kg
3082 - 13ft 9in 20 row (18 bar anchors) 29kg
3083 - 14ft 6in (19 bar anchors) 31kg
3084 - 15ft 3in (20 bar anchors) 33kg
3085 - 16ft 24 row (21 bar anchors) 34kg
3073 - 16ft 10in (22 bar anchors) 36kg
3086 - 18ft 4in 28 row (24 bar anchors) 40kg
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.3M WIDE (3W X 3L TINES) EXTRA HEAVY DUTY LEVELLING HARROW (2.3M - 5.6M)

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1575kg
No of bearings: 6
No of axles: 2
Cutting width: 2.06m (6ft 9inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 6MM DISCS - 0840, SUIT 60-130HP

Find Tillage And Seeding Equipment For Sale. Browse 404 Tillage And Seeding Equipment listings from Farm Supplies Machinery & Equipment.

New & Used Tillage And Seeding Equipment For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

GB 5.7M HEAVY DUTY OFFSET DISCS - 44 DISCS (250-350HP)

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 24 INCH DISCS - 0976

JOHN BERENDS 3 TINE MULTI TINE RIPPERS - 0133

GB 3.5M, 28 DISCS (180-240HP) HEAVY DUTY OFFSET DISCS

MURRAY 2.1M SMALL ACREAGE PASTURE HARROW - SERIES 23

GB 2.8M, 24 DISCS (110-150HP) MEDIUM DUTY OFFSET DISCS

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

DAKEN PIPE LAYING ATTACHMENT UP TO 65HP GALVANIZED - 85020C

GB 4M, 32 DISCS (200-250HP) HEAVY DUTY OFFSET DISCS

DAKEN CAT II OR III THREE SHANK SUB SOIL RIPPER (MAX 140HP)

MURRAY 2.3M WIDE (3W X 3L TINES) EXTRA HEAVY DUTY LEVELLING HARROW (2.3M - 5.6M)

JOHN BERENDS RM75 HD TRAILING OFFSET 18 PLATE 6MM DISCS - 0840, SUIT 60-130HP

Farm Supplies Machinery & Equipment

Dealer Address