Farm Supplies Machinery & Equipment

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 6MM SCALLOP DISCS - 0861, SUIT 75-165HP

Tube specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX DRILL TUBE SHORT - REPLACEMENT FOR MASSEY FERGUSON

The 3m steel roller presses firmly into the ground following seeding, with enough weight to distribute the gentle compaction evenly required for perfect germination.
Simple, cost effective way to achieve a firm consistent seed bed finish.
Made in Australia
Weight = 371kg*
2 position Drawbar is removable when transporting
Designed to trail behind a tractor and press seeds into the soil, ensuring higher strike rates.
* Weight can be added with water/weights to increase compaction.

How to...
1) connect the steel roller to your tractor or behind seeder
2) adjust the weight to suit down force required
3) go over the field where you have sown (or sowing) and press the soil with your tyre roller.
Job done.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHERWOOD 3M STEEL ROLLER (TOWABLE)

Skim Mouldboard specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SKIM MOULDBOARD - LH (KVERNELAND)

Power Harrow Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX POWER HARROW BLADE - 110 X 16 X 330MM (RH)

Model 48500 Series 48 Jumbo Cultivation Harrow System (2 point pull, Category C).
Options for this listing: Complete set.
48102 - 1.72m with 2 sections and bar (this listings price) 132kg
48103 - 2.59m with 3 sections and bar (call for price) 197kg
48104 - 3.45m with 4 sections and bar (call for price) 262kg
48105 - 4.32m with 5 sections and bar (call for price) 330kg
48106 - 5.18m with 6 sections and bar (call for price) 404kg
Options for this listing: Drawbars Only.
48702 - 1.72m suits 2 sections (call for price) 24kg
48703 - 2.59m suits 3 sections (call for price) 35kg
48704 - 3.45m suits 4 sections (call for price) 46kg
48705 - 4.31m suits 5 sections (call for price) 60kg
48706 - 5.18m suits 6 sections (call for price) 80kg
Information on the Jumbo Cultivation Harrow System:
- Murray Agricultural Equipment has set the pace in tillage with the Series 48 Jumbo Cultivation Harrow a truly heavy duty Tine Harrow to meet the demands of todays farming practices.
- The Murray Series 48 Jumbo Cultivation Harrow meets a need for a flexible, cultivation-style Harrow suitable for seedbed preparation and soil working in heavier soils. It is significantly heavier than standard Stump Jump harrows. Heavier steel components add to weight for improved penetration, greater strength and an extended working life.
- Greater tine layback and wide inter-rank tine spacing give the Murray Series 48 Jumbo Cultivation Harrow a superior trash handling ability. Longer cut tines allow a greater working depth and provide a long working life. A fully interlocking tine/frame design assists in maintaining tines in the optimum vertical working position.
- The Series 48 can also be used in conjunction with heavy primary tillage implements including disc harrows, to produce the basis of a finer seedbed. It is also useful for pasture establishment or renovation, and harrowing where extra weight and strength is required. 100% Australian made and owned.
Specifications for Series 48 Jumbo Cultivation Harrow System (48500):
Weight 54kg (120lb).
Coverage 0.86m (2ft 10in).
Tine Spacing 44mm (1 3/4in).
Tine length 248mm (9 3/4in) approx.
Centre to centre of Front Hooks 444mm (17 1/2in).
5 Ranks / 20 Tines.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 1.72M SERIES 48 CULTIVATION HARROW SYSTEM COMPLETE SET (1.7M - 5.18M)

Weld on Repair Tip specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX WELD ON REPAIR TIP - 180MM

Series 39 Hydraulic folding wing frame with 5 section folding S08 Stump Jump Harrow. 4.3m coverage. Transport width: 2.9m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.3M HYDRAULIC FOLDING FRAME STUMP JUMP HARROW

Light duty power harrow for tractors up to 80 / 100hp. Suitable for small agricultural applications.
Specifications:
Actual Width: 205cm
Working Width: 200cm
Required HP: 50-80hp
Weight: Cage roller - 610kg, Packer roller - 690kg
No of Blades: 16
Features:
Rated up to 80hp
319 rotor speed
540 rpm
Category one linkage / two linkage
Rear levelling bar with winder height adjustment
Manual depth control
260 x 90 x 10mm tines
260mm working depth
45 degree sliding side plates
Shearbolt safety on Driveshaft
Greasable top bearings
Accessories:
Four speed gearbox (rated to 100hp)
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
GO200 200cm Working Width 50-80HP 16 Tines
GO225 225cm Working Width 60-80HP 18 Tines
GO250 250cm Working Width 65-80HP 20 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2M (50-80 HP) GO POWER HARROW

Specifications:
Beta DTM-24
22'' / 560mm Scalloped Discs
Number of discs: 24
Working depth with 560 mm discs (mm): up to 150
Working depth with 610 mm discs (mm): Up to 200
Working width (mm): 3200
Overall width (mm): 3400
Overall length in operation (mm) :2840
Transit-mode length (mm): 2060
Overall height in operation (mm): 1510
Transit-mode height (mm): 2280
Weight with cage roller (kg): 1805
Weight with double cage roller (kg): 1960
Required tractor power (HP): 95-110
Beta utilizes its clever design and systematically arranged components, farmers can harness a higher working capacity while saving time and fuel costs. It is an excellent choice for seedbed preparation and stubble processing.
The main platform is built using a select choice of high-quality thick steel plates. Another noticeable aspect is that the brush tines are suspended on solid HSS steel for added strength and effectiveness against stubborn weeds and clumped-up soil. Its main contraption is its two rows of opposite facing disc harrows that very aggressive work front which ensures optimal flow of soil and/or residue in every work condition. The discs are mounted on independent suspensions and are spaced by 30 cm to increase efficiency and operating performance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MINOS AGRI BETA DTM-24 SPRING MOUNTED DISC ARM - 3.2M (95-110HP)

2.56m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3302 - 2.56m (8ft 5in) - 1/9 Tine, 2/12 Tine - 35kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The Agrivator AV Series is a 3pt linkage mounted rolling tine aerator. Ideal for shattering and allowing water absorption into the soil and expansion of root zone in pasture and crops.
Australian Made
Also available in Galvanised Body (optional).
Features...
Heavy duty frame design
Extra large capacity rotor bearings (greasable)
High wear resistant tines
Tow hitch for harrows etc
4 x angle settings for rotors 0-10°
Cat 1 and 2 hitch
Cat 3 on all H models (hydraulic fold)
Park stands x 4 for storage
Painted or Galvanised main frame
Agrifarm AV series Aerators are pre-bracketed in manufacture to suit Optional Extras. Please see these optional items below:
(Optional) ASB Seeders and mounting kit are available for AV150, 200, 250, 300, 400, 400H, 500H and 600H...
Available in modules of 900mm width
Mounted on rear RHS member of frame
Capacity 22 litres per module
(Optional) Spring Tine Harrows available to suit AV150, AV200, AV250, AV300, AV400, 400H, 500H and 600H Aerators include...
2 rows of Spring Tines
Quick 2 pin location for transport
2 pin removal if harrows aren't required
Close to rear of machine for exceptional manoeuvrability.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM AV150 AGRIVATOR AERATOR SERIES (1.5M)

Find Tillage AND Seeding For Sale. Browse 968 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 6MM SCALLOP DISCS - 0861, SUIT 75-165HP

SPAREX DRILL TUBE SHORT - REPLACEMENT FOR MASSEY FERGUSON

SHERWOOD 3M STEEL ROLLER (TOWABLE)

SPAREX SKIM MOULDBOARD - LH (KVERNELAND)

SPAREX POWER HARROW BLADE - 110 X 16 X 330MM (RH)

MURRAY 1.72M SERIES 48 CULTIVATION HARROW SYSTEM COMPLETE SET (1.7M - 5.18M)

SPAREX WELD ON REPAIR TIP - 180MM

MURRAY 4.3M HYDRAULIC FOLDING FRAME STUMP JUMP HARROW

CELLI 2M (50-80 HP) GO POWER HARROW

MINOS AGRI BETA DTM-24 SPRING MOUNTED DISC ARM - 3.2M (95-110HP)

MURRAY SERIES 03 LEVELLING HARROW 2.56M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

AGRIFARM AV150 AGRIVATOR AERATOR SERIES (1.5M)

Farm Supplies Machinery & Equipment

Dealer Address