Farm Supplies Machinery & Equipment

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 24
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
2.4m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.4M S-TINE (24 TINES) STANDARD CULTIVATOR - MIN 48HP

Rigid box construction rotary hoes suitable for ground preparation on small farms and market gardens.
Features:
40 HP single speed gearbox.
1450mm working width.
Side chain drive with auto tensioner.
28 x C blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 25-40 HP
Working Width (mm): 1450
Working Depth (mm): 50-150
Product Weight (kg): 220
Total Width (mm): 1620
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.45M B40F ROTARY HOE (MIN 25-40HP)

3.25m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3505 - 3.25m (10ft 8in) 2/12 Tine, 2/16 Tine - 58kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

5.13m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3413 - 5.13m (16ft 10in) - 2/9 Tine, 4/12 Tine - 102kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 5.13M, 3 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

Model 48500 Series 48 Jumbo Cultivation Harrow System (2 point pull, Category C).
Options for this listing: Complete set.
48102 - 1.72m with 2 sections and bar (this listings price) 132kg
48103 - 2.59m with 3 sections and bar (call for price) 197kg
48104 - 3.45m with 4 sections and bar (call for price) 262kg
48105 - 4.32m with 5 sections and bar (call for price) 330kg
48106 - 5.18m with 6 sections and bar (call for price) 404kg
Options for this listing: Drawbars Only.
48702 - 1.72m suits 2 sections (call for price) 24kg
48703 - 2.59m suits 3 sections (call for price) 35kg
48704 - 3.45m suits 4 sections (call for price) 46kg
48705 - 4.31m suits 5 sections (call for price) 60kg
48706 - 5.18m suits 6 sections (call for price) 80kg
Information on the Jumbo Cultivation Harrow System:
- Murray Agricultural Equipment has set the pace in tillage with the Series 48 Jumbo Cultivation Harrow a truly heavy duty Tine Harrow to meet the demands of todays farming practices.
- The Murray Series 48 Jumbo Cultivation Harrow meets a need for a flexible, cultivation-style Harrow suitable for seedbed preparation and soil working in heavier soils. It is significantly heavier than standard Stump Jump harrows. Heavier steel components add to weight for improved penetration, greater strength and an extended working life.
- Greater tine layback and wide inter-rank tine spacing give the Murray Series 48 Jumbo Cultivation Harrow a superior trash handling ability. Longer cut tines allow a greater working depth and provide a long working life. A fully interlocking tine/frame design assists in maintaining tines in the optimum vertical working position.
- The Series 48 can also be used in conjunction with heavy primary tillage implements including disc harrows, to produce the basis of a finer seedbed. It is also useful for pasture establishment or renovation, and harrowing where extra weight and strength is required. 100% Australian made and owned.
Specifications for Series 48 Jumbo Cultivation Harrow System (48500):
Weight 54kg (120lb).
Coverage 0.86m (2ft 10in).
Tine Spacing 44mm (1 3/4in).
Tine length 248mm (9 3/4in) approx.
Centre to centre of Front Hooks 444mm (17 1/2in).
5 Ranks / 20 Tines.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.72M SERIES 48 CULTIVATION HARROW SYSTEM COMPLETE SET (1.7M - 5.18M)

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator.
The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.
The tines are extremely strong for this reason, using the same tines as the stump jump plough. The machine is ideal for lighter sandy soils where penetration and draft are not a problem.
Features:
9 Tines at 12 adjustable spacings.
Heavy duty 100x100x6mm frame.
Overall width of the machine is 9 wider than the cut width ie 5 tine is 5 9, 7 tine is 79 and so on.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings.
Horsepower requirements vary widely but 10 HP per tine is a rough guide.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 9'9" (2.9M) - 0184

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60 -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

Brevis power harrow range offer features that include phased rotors, robust gearboxes and gear drives. Selected models have a combination seeder option for tillage and seeding in one pass.
Features Include:
150HP single speed gearbox (540 RPM).
Phased rotors.
Stone protection system.
Levelling bar standard.
Floating side shields.
2460mm working width.
100 - 300mm Working depth.
1 3/8in 6 spline PTO with slip clutch.
Phased Rotor Benefits:
Reduces the absorption of power and fuel consumption.
Eliminates vibrations.
Better soil crumbling.
MF150-250CR Specifications (with optional Cage Roller):
Connection Type: Linkage
Min Tractor PTO HP: 100-150 HP
NO. of Blades: 20
Working Width (MM): 2460
Product Weight (KG): 1010
Total Width (MM): 2520
MF150-250PR Specifications (with optional Packer Roller):
Connection Type: Linkage
Min PTO HP: 100-150 HP
NO. of Blades: 20
Working Width (MM): 2460
Product Weight (KG): 1100
Total Width (MM): 2520
Factory Options:
Super Fast Blade System
Wheel Track Eradicator
All prices include GST. Please allow extra for freight.
Delivery available Australia wide!
Contact Farm Supplies today for sales enquires or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 2.46M MEKFARMER POWER HARROW (MIN 100-150HP)

Light duty power harrow for tractors up to 80 hp. Suitable for vineyard, orchard and light agricultural applications.
Specifications:
Actual Width: 156cm
Working Width: 150cm
Required HP: 40-80hp
Weight: Cage roller - 415kg, Packer roller - 505kg
No of Blades: 12
Features:
Rated up to 80hp
319 rotor speed
540 rpm
Category one linkage
Manual depth control
260 x 90 x 10mm tines
260mm working depth
Fixed side plates
Shearbolt safety on Driveshaft
Greasable top bearings
Optional levelling bar
Accessories:
Levelling bar
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
MINIGO100 100cm Working Width 30-80HP 8 tines
MINIGO125 125cm Working Width 35-80HP 10 tines
MINIGO150 150cm Working Width 40-80HP 12 tines
MINIGO175 175cm Working Width 45-80HP 14 tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.5M (40-80 HP) MINI GO POWER HARROW

Medium duty rotary hoe suitable for tractors up to 120hp.
Specifications:
Actual Width: 282cm
Working Width: 260cm
Required HP: 85-120hp
Weight: 770kg
No of Blades: 60
Features:
Rated up to 120hp
PTO 540rpm 4 speed gearbox (155-180 models)
PTO 1000rpm 2 speed gearbox (205-305 models)
Swinging lower links
Gear side drive
80x7mm L blades
6 blades per flange
250mm working depth
Side skids
Adjustable scroll tailgate
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options:
Spike rotor (30x30x170mm spikes) c/w 2 piece adjustable tailgate (180-305 only)
Anti-pan (straight blade) rotor c/w 2 piece adjustable tailgate (180-305 only)
Roller Options:
Cage Roller (385mm diameter)
Ergon 155 = 860kg with roller
Ergon 180 = 880kg with roller
Ergon 205 = 920kg with roller
Cage Roller (440mm diameter)
Ergon 230 = 980kg with roller
Ergon 255 = 1050kg with roller
Ergon 280 = 1110kg with roller
Ergon 305 = 1180kg with roller
Packer Roller (420mm diameter)
Ergon 155 = 920kg with roller
Ergon 180 = 1000kg with roller
Ergon 205 = 1080kg with roller
Packer Roller (470mm diameter)
Ergon 230 = 1160kg with roller
Ergon 255 = 1240kg with roller
Ergon 280 = 1300kg with roller
Ergon 305 = 1380kg with roller
Accessories:
Automatic cut-out clutch (Cam) - All models
Hydraulic adjustment for rear roller - All models
Bolt on double flange kit (per flange) - All models
'C' (speed) blades in lieu of 'L' blades - All models
Rear steel wheels - All models
Models
ERGON120-155 160cm Working width 60-120hp 600kg 36 Blades
ERGON120-180 185cm Working width 70-120hp 650kg 42 Blades
ERGON120-205 210cm Working width 75-120hp 690kg 48 Blades
ERGON120-230 235cm Working width 80-120hp 733kg 54 Blades
ERGON120-255 260cm Working width 85-120hp 770kg 60 Blades
ERGON120-280 285cm Working width 90-120hp 800kg 66 Blades
ERGON120-305 310cm Working width 100-120hp 880kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.6M (85-120HP) ERGON ROTARY HOE

Light duty power harrow for tractors up to 80 / 100hp. Suitable for small agricultural applications.
Specifications:
Actual Width: 230cm
Working Width: 225cm
Required HP: 60-80hp
Weight: Cage roller - 670kg, Packer roller - 750kg
No of Blades: 18
Features:
Rated up to 80hp
319 rotor speed
540 rpm
Category one linkage / two linkage
Rear levelling bar with winder height adjustment
Manual depth control
260 x 90 x 10mm tines
260mm working depth
45 degree sliding side plates
Shearbolt safety on Driveshaft
Greasable top bearings
Accessories:
Four speed gearbox (rated to 100hp)
Cam clutch (in lieu of shearbolt) on driveshaft
Options:
Roller Options
Cage roller (385mm diameter)
Packer roller (420mm diameter)
Models:
GO200 200cm Working Width 50-80HP 16 Tines
GO225 225cm Working Width 60-80HP 18 Tines
GO250 250cm Working Width 65-80HP 20 Tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.25M (60-80 HP) GO POWER HARROW

80 LB / 36 KG Commercial Broadcast Spreader with Standard-Output Tray.
The New F80 is the first model in the FLEX-SELECT series of broadcast spreaders. Built on the chassis of our very popular 2150/2170 line of spreaders, the F80 is ideal for all broadcast spreading jobs, and with adding one of the optional Interchangeable trays, you can customize your F80 to spread anything from low SGN to high SGN materials accurately fine grass seed to coarse rock salt and everything between.
Features
- Includes the Standard-Output Tray for free-flowing granular materials
- Single-Tube Diamond Design Commercial epoxy powder coated chassis
- Tee handle gauge & lever rate control with adjustable solid linkage
- 80 lb / 36 kg hopper capacity
- 13 / 33cm diameter stud-type tires on rust-proof poly rims
- 2-position height adjustable handle for a custom operator fit
- Gauge & lever rate control with adjustable solid linkage
- EVEN-SPREAD FLEX-SELECT Interchangeable Tray System fits all 3 trays
- Built in Side Spread Control at the pull of a lever
- Includes a Debris Screen
- Optional Standard-Output PRO, High-Output or Low-Output Trays
- Optional 3-Sided Deflector (#60166R)
- Optional Left Side Deflector (60435KIT)
- Optional Rain Cover (F77080)
- Converts to a towable spreader with an optional kit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

EARTHWAY FLEX SELECT 36KG SPREADER INC SIDE SPRED CONTROL - ES-F80

Find Tillage AND Seeding For Sale. Browse 975 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS 2.4M S-TINE (24 TINES) STANDARD CULTIVATOR - MIN 48HP

BREVIGLIERI 1.45M B40F ROTARY HOE (MIN 25-40HP)

MURRAY SERIES 03 LEVELLING HARROW 3.25M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

MURRAY SERIES 03 LEVELLING HARROW 5.13M, 3 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

MURRAY 1.72M SERIES 48 CULTIVATION HARROW SYSTEM COMPLETE SET (1.7M - 5.18M)

JOHN BERENDS RIGID TINE CHISEL PLOUGHS 9'9" (2.9M) - 0184

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

BREVIGLIERI 2.46M MEKFARMER POWER HARROW (MIN 100-150HP)

CELLI 1.5M (40-80 HP) MINI GO POWER HARROW

CELLI 2.6M (85-120HP) ERGON ROTARY HOE

CELLI 2.25M (60-80 HP) GO POWER HARROW

EARTHWAY FLEX SELECT 36KG SPREADER INC SIDE SPRED CONTROL - ES-F80

Farm Supplies Machinery & Equipment

Dealer Address