Farm Supplies Machinery & Equipment

The coil tines are 30mm square, and are used for primary and secondary cultivation.
They are ideal where deep penetration is required without bringing subsoil up to the surface. They are commonly used in market garden operations to penetrate beneath the normal level of cultivation.
The coil allows the tine to move, assisting penetration and reducing horsepower needed. Coil tines do not disturb the surface as much as the wider chisel plough tines. This is useful in operations as pasture renovation and plough or rotary hoe pan breaking.
The finer tine is also good for secondary cultivation where a heavy machine is needed for heavy soils. Overall width of the machine is 9 wider than the cut width ie: 5 tine is 5 9, 7 tine is 7' 9' and so on.
Features
The frame is 100 x 100 x 6mm, similar to the rigid chisel plough
Cat 1 & 2 Linkage
Extra tines can be fitted if required to reduce tine spacing
30mm square high resistance hardened double coil tines.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings
Horsepower requirements vary widely but 8-10 HP per tine is a rough guide
Excellent underframe trash clearance of 520mm
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18)
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS COIL TINE CHISEL PLOUGHS 11 TINES - 0208

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 5MM DISCS - 0832, SUIT 60-130HP

RZ Range RLC Leaf Spring Rippers 3m R9-3
Heavy duty leaf spring ripper for primary cultivation, winter crop cultivation and increased soil drainage. Fixed and hydraulic folding models available. This is the Fixed Frame version.
Specifications
Working Width: 300cm
Required HP: 125-200hp
Rippers: 9
Fixed Frame.
Features
Double clamp bolt-on legs.
Adjustable leaf spring.
Heavy duty 100x100mm box section.
Adjustable rubber depth wheels.
865kg breakout.
Reversible chisel point.
Solid steel legs.
Options
Rear rollers.
Rubber depth wheels (2×600-9)
Wing share.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75HP-165HP tractors.
Fitted with 24inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

Multiple interrow tillers manufactured by Breviglieri are mechanical PTO-driven machines designed for soil cultivation between rows of plants which have already reached a certain height (sunflower, maize, tobacco, cotton, beet, vegetables and flowers in general) and for nurseries.
The interrow tillers mechanically shred, scarify and aerate the surface layers of the soil, improving its natural fertility and virtually eliminating the need for herbicides and pesticides.
They also enable fertiliser use to be drastically reduced, resulting in considerably more abundant crop growth in a clean, eco-friendly environment and therefore greatly improved production yield per hectare.
These machines consist of a one-piece frame and a series of independent cutting elements, which can be adjusted based on the different types of row crop or nursery requirements. They can also be fitted with different accessories such as a fertiliser spreader and a folding frame for road transport.
7 types of MBE3 models: Please note the price listed is for model MBE3 165.
- MBE3 165: 30-50HP, 165cm working width, 160kg
- MBE3 230: 35-50HP, 230cm working width, 179kg
- MBE3 280: 40-60HP, 280cm working width, 199kg
- MBE3 330: 50-70HP, 330cm working width, 219kg
- MBE3 440: 60-80HP, 440cm working width, 288kg
- MBE3 310-P (Manual Folding): 50-70HP, 310cm working width, 250kg
- MBE3 440-P (Manual Folding): 50-70HP, 440cm working width, 325kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 165-440CM INTER ROW TILLER (30-80HP)

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50
RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 28
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.8M S-TINE (28 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 56HP

5.58m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3814 - 5.58m (18ft 4in) (28 Row) 6/20 Tine - 168kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 5 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 24
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
2.4m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 2.4M S-TINE (24 TINES) STANDARD CULTIVATOR - MIN 48HP

5.58m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3314 - 5.58m (18ft 4in) (28 Row) 6/12 Tine - 90kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The Doble rotary hoe is well suited to rugged conditions such as sugar cane, cotton, broadacre and large vegetable farms.
Its purpose built with two robust side frames that hydraulically fold for transport and storage.
Specifications:
Tractor HP: 150-220 HP
Connection Type: Linkage
Gearbox: single speed (1000 RPM)
Working Width: 3600mm
Working Depth: 100-200mm
Blades: 84 x L
Folded Width for Transport: 2680mm
Weight: 2070kg
Features:
- 220HP single speed gearbox (1000 RPM)
- 6 L blades per flange with double flanges
- Side gear drives
- 1 3/4" 20 spline PTO with cam clutch
- Store folded
- Wheel track eradicators
- Hardox rotor supports
- Duo cone seals
Options:
- Cage roller (450mm)
- Packer roller (500mm)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 3.6M DOBLE FOLDING ROTARY HOE (150-220HP)

Series 38 Manual winch rigid frame with 4 section rigid S44 Broadacre Stump Jump Harrow. 3.45m. Transport width: 3.57m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 3.57M MANUAL RIGID FRAME BROADACRE STUM JUMP HARROW

Heavy duty rotary hoes intended for large farms, specialised operations and contractors. They are designed to work in heavy conditions with a wide choice of accessories.
The versatility allows better tillage results on many ground types.
Features:
170 HP multi speed gearbox with rear PTO (1000 RPM).
2800mm working width.
66 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
Rear door with spring and pin adjustment.
1 3/8in 21 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Product Code: B170V-280
Min Tractor PTO HP: 90-170 HP
Working Width (mm): 2800
Working Depth (mm): 100-200
Product Weight (kg): 1080
Total Width (mm): 3000
Weight with Optional Cage Roller:
Product Weight (kg): 1200
Weight with Optional Packer Roller:
Product Weight (KG): 1360
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Double Flange
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 2.8M B170 ROTARY HOE (MIN 90-170HP)

Find Tillage AND Seeding For Sale. Browse 975 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS COIL TINE CHISEL PLOUGHS 11 TINES - 0208

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 5MM DISCS - 0832, SUIT 60-130HP

RLC 3M FIXED FRAMED LEAF SPRING RIPPERS (11 RIPPERS)

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 6MM SCALLOP DISCS - 0863, SUIT 75-165HP

BREVIGLIERI 165-440CM INTER ROW TILLER (30-80HP)

JOHN BERENDS 2.8M S-TINE (28 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 56HP

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 5 RANK DEEP SECTIONS & STD DRAWBAR-HEAVY DUTY-COMPLETE SET

JOHN BERENDS 2.4M S-TINE (24 TINES) STANDARD CULTIVATOR - MIN 48HP

MURRAY SERIES 03 LEVELLING HARROW 5.58M, 3 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

BREVIGLIERI 3.6M DOBLE FOLDING ROTARY HOE (150-220HP)

MURRAY 3.57M MANUAL RIGID FRAME BROADACRE STUM JUMP HARROW

BREVIGLIERI 2.8M B170 ROTARY HOE (MIN 90-170HP)

Farm Supplies Machinery & Equipment

Dealer Address