Farm Supplies Machinery & Equipment

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3980kg
No. of Bearings: 20
No. of axles: 8
Cutting width: 5.26m (17ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 24 INCH DISCS - 0976

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3290kg
No. of Bearings: 12
No. of axles: 4
Cutting width: 3.43m (11ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

Stony soil can be a major problem in the construction of parks, gardens, golf courses and any other designated green areas.
Breviglieri has engineered an efficient and functional appliance for burying stones. The robust system and oversized parts make the stone burier a dependable machine that can deal with even the toughest situations.
Stone buriers perform multiple functions in a single pass, delivering considerable agronomic and economic benefits:
- mills soil + seeds
- separates and buries soil + seeds
- levels tilled earth ready for seeding
- breaks up large clods
- facilitates drainage of the seed bed and improves water flow regulation
- reduces soil compaction
- generates significant labour savings
- speeds up soil preparation
- seeding
3 Types OF SB80 Models: Please note the price listed is for model SB80 155.
- SB80 155: 40-45HP, 155cm working width, 36L blades, 670kg
- SB80 180: 50-60HP, 180cm working width, 42L blades, 720kg
- SB80 205: 60-65HP, 205cm working width, 48L blades, 770kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 155-205CM STONE BURIER (40-65HP)

Series 38 Manual winch folding wing frame with 5 section folding S44 Stump Jump Harrow. 4.31m coverage. Transport width: 3.68m.
Please note that 3 point linkage pins are not supplied.
Murray Series 38 Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 38 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 4.31M MANUAL FOLDING FRAME STUMP JUMP HARROW

Series 38 Manual winch rigid frame with 2 section rigid S44 Broadacre Stump Jump Harrow. 1.72m. Transport width: 2.68m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.59M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

4.64m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3411 - 4.64m (15ft 3in) - 4/9 Tine, 2/12 Tine - 88kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Series 08 - 2.59m Stump Jump Harrow 3 Point Linkage Hoist Lift Type (4 point pull) featuring Series 21 Hoist Frame - Complete Set.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not stump jump harrows. Picture is for example only.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Series 21 3-Point Linkage Hoist Frame.
8029 - 3 section 2.59m (8ft 6in) - 204kg.
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 2.59m (8ft 6in).
- Weight 204kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 2.59M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

Series 05 Pastureland Harrow System - Light Duty.
Complete light duty harrow systems available from 1.52m (5ft) to 6.09m (20ft) configurations, in standard/single-mesh and super/double mesh versions. Each set of Murray Pastureland Harrows is supplied complete with a steel drawbar.
The Murray Pastureland Harrow System is recommended for pasture establishment, maintenance and renovation applications. Ideal for breaking down and distributing animal manures and other organic matter evenly across the whole pasture, using a Series 05 will encourage pasture growth. This light duty harrow is suitable generally for pasture areas of less than 100 acres (40 hectares) and tows easily behind small and medium size tractors.
Murray Series 05 Pastureland Harrows utilise four rows of double-sided tripod tine units which slice through patts, clods and coarse vegetation. The tripod section is followed by heavy steel square chain mesh which further pulverises and spreads the manure and organic matter and revitalises the pasture. The standard single-mesh chain Murray Pastureland Harrow has 8 rows of chain complete with a spreader bar and drag weights. Where greater penetration and a more aggressive action is needed, the Murray super double-mesh chain Pastureland Harrow may be used, which has 15 rows of square chain mesh. The extra chain length and weight ensure a thorough processing of material.
The Series 05 Pastureland Harrows can be used in conjunction with the Murray Series 21 3-point linkage Harrow Hoist Frame for ease of transportation.
For larger field operations, Murray Agricultural Equipment manufactures the Series 20 Heavy Duty Pasture Harrow System.
100% Australian made and owned.
Features:
- Tine Spacing 51mm (2in)
- Tine Length 85mm (3 11/32in) approx
- Centre to Centre of Front Hooks 305mm (12in)
Drag Type Standard 0.76m (2ft6in) Deep Mesh Chain:
Model 5020 Coverage: 1.52m (5ft) 82kg
Model 5006 Coverage: 1.83m (6ft) 99kg
Model 5021 Coverage: 2.44m (8ft) 129kg
Model 5022 Coverage: 3.04m (10ft) 172kg
Model 5023 Coverage: 3.65m (12ft) 213kg
Model 5024 Coverage: 4.57m (15ft) 269kg
Model 5003 Coverage: 6.09m (20ft) 380kg
Hoist Lift Type (Series 21) Standard 0.76m (2ft6in) Deep Mesh Chain:
Model 5025 Coverage: 5ft 132kg
Model 5007 Coverage: 6ft 147kg
Model 5026 Coverage: 8ft 179kg
Model 5027 Coverage: 10ft 222kg
Model 5028 Coverage: 12ft 263kg
Model 5029 Coverage: 15ft 332kg
Drag Type Super 1.5m (5ft) Deep Mesh Chain:
Model: 5067 Coverage: 1.52m (5ft) 123kg
Model: 5008 Coverage: 1.83m (6ft) 133kg
Model: 5030 Coverage: 2.44m (8ft) 173kg
Model: 5031 Coverage: 3.04m (10ft) 225kg
Model: 5032 Coverage: 3.65m (12ft) 292kg
Model: 5033 Coverage: 4.57m (15ft) 349kg
Model: 5004 Coverage: 6.09m (20ft) 490kg
Hoist Lift Type (Series 21) Super 1.5m (5ft) Deep Mesh Chain:
Model: 5068 Coverage: 5ft 170kg
Model: 5009 Coverage: 6ft 185kg
Model: 5034 Coverage: 8ft 230kg
Model: 5035 Coverage: 10ft 280kg
Model: 5036 Coverage: 12ft 347kg
Model: 5037 Coverage: 15ft 417kg
Complete Set Comprises of Front Drawbar, Tine section, Mesh Chain section (and Series 21 3-Point Linkage Hoist Frame and Lift connectors if Hoist Lift type specified.
Model Numbers 5029 and 5037 also feature a Model Number 5071 Rear Lift / Hoist extension bar.
Individual panels, chains and parts also available for sale.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY SERIES 05 PASTURELAND LIGHT DUTY HARROW SYSTEMS - (1.52M - 6.09M) WIDTH

Series 39 Hydraulic folding wing frame with 5 section folding S44 Broadacre Stump Jump Harrow. 4.3m coverage. Transport width: 2.9m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 4.3M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

The reverse rotation stone burier is ideal for horticultural applications in a range of soil conditions.
Specifications:
Actual Width: 203cm
Working Width: 185cm
Required HP: 80-110hp
Weight: 1157kg
No of Blades: 54
Features:
Rotary hoe or reverse rotor rotation
Rated up to 80hp
Four speed gearbox
540 rpm
Category two hitch
Stone burier blades (90x10mm)
6 blades per flange
Rear tailgate with spring cushioned comb
Levelling bar
25cm working depth
Gear side drive
Cam clutch
Front sod breaking discs
Mesh roller
Options in Lieu of Standard:
Hydraulic roller adjustment
Oil cooler
Models:
ARES-BF130 1.3M 60-110HP 830kg 36 blades
ARES-B150 1.5M 65-110HP 920kg 42 blades
ARES-BF170 1.7M 75-110HP 1055kg 48 blades
ARES-BF185 1.85M 80-110HP 1157kg 54 blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 1.85M (80-110HP) ARES STONE BURIER

Heavy duty rotary hoe suitable for tractors up to 190hp. 190F-255 (130-190 HP).
Specifications:
Actual Width: 282cm
Working Width: 260cm
Required HP: 130-190hp
Weight: 1120kg
No of Blades: 60
Features:
Rated up to 190hp
Two speed gearbox
1000rpm
Swinging lower links
Gear side drive
80x8mm L blades
6 blades per flange
250mm working depth
Side skids
Two piece adjustable, spring loaded frangor tailgates
Foot stand
Slip clutch
Options In Lieu of Standard:
Rotor Options
Spike rotor spike (30x30x170)
Anti-pan rotor (straight blade)
Roller Options
Cage roller (440mm diameter)
Packer roller (470mm diameter)
Accessories:
Oil cooler kit
Bolt on double flange kit per flange
Hydraulic adjustment for rear roller
Hydraulic tailgate adjustment
Rear steel wheels
C (speed) blades in lieu of L blades
Sugar Cane/Pineapple Version (Tiger 190F-305-SC):
Heavy headstock with oil cooler
100x100mm front beam
10mm blades
500mm diameter rear Cage roller
Hydraulic roller adjustment
Models:
TIGER190F-255 260cm Working width 130-190hp 1120kg 60 Blades
TIGER190F-280 280cm Working width 140-190hp 1180kg 66 Blades
TIGER190F-305 310cm Working width 155-190hp 1240kg 72 Blades
TIGER190F-305-SC 310cm Working width 155-190hp 1240kg 72 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.6M (130-190HP) TIGER ROTARY HOE

9 leg Subsoiler with tines & discs up to 450mm working depth. Made in new Zealand.
304 Auto Reset Panerazers are the ultimate sub soiling machine. Especially when the soils to be aerated are heavy & full of obstructions.
Being auto reset makes your sub soiling job seamless as the legs simply lift over any obstruction & immediately reset automatically so you can continue aerating your soils without stopping. Leaf spring reset has a great advantage over rams, not only do they require less maintenance, but the legs are at the highest point of resistance while in the ground & resistance reduces as they lift.
This ensures the legs do not tip falsely but ensures they do clear obstructions when struck.
Rata Panerazer legs are in a 'V' formation. This reduces drag between the legs making it easier to pull and uses less fuel. V formation also means the legs leave the ground independently at the headlands which eliminates 'heaving'.
They feature a heavy duty build RHS main frame construction with reinforcing to cope with hard conditions. The wear protected legs are also securely bolted into the reset mounts.
Working depth is easily controlled via the rear roller setting and tractor 3 point linkage. The rear roller is secured to the main aerator frame with heavy machine pins.
The rear roller is securely mounted into a sealed bearing to ensure smooth operation with minimal wear. The roller is also kept clean by a scraper mounted just behind it.
An innovative modular leg, foot & point assembly provides maximum flexibility of parts. Cast point provides extra wear protection in the form of bevelled hard wearing plate.
Winged feet are an option on the Rata Panerazer range (see photos attached). These provide extra ground lift when sub soiling to create greater subsoil disturbance.
The auto reset system is powered by heavy duty leaf springs mounted on each leg. Leaf springs reset immediately after tripping & clearing the obstacle unlike other reset systems such as hydraulic. This tension is easily adjusted via the 'tension bolt' mounted on the leg. This enables the operator to adjust the tension to the ideal level required for the ground they're operating in. The tension adjustment spanner is included with the implement.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 9 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

Find Tillage AND Seeding For Sale. Browse 984 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 44 PLATE X 24 INCH DISCS - 0976

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 28 PLATE X 24 INCH DISCS - 0972

BREVIGLIERI 155-205CM STONE BURIER (40-65HP)

MURRAY 4.31M MANUAL FOLDING FRAME STUMP JUMP HARROW

MURRAY 2.59M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

MURRAY SERIES 03 LEVELLING HARROW 4.64M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY 2.59M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

MURRAY SERIES 05 PASTURELAND LIGHT DUTY HARROW SYSTEMS - (1.52M - 6.09M) WIDTH

MURRAY 4.3M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

CELLI 1.85M (80-110HP) ARES STONE BURIER

CELLI 2.6M (130-190HP) TIGER ROTARY HOE

RATA 9 LEG (AUTO RESET) SUBSOIL CULTIVATOR (150HP RECOMMENDED)

Farm Supplies Machinery & Equipment

Dealer Address