Farm Supplies Machinery & Equipment

Strong compact tandem disc ideal for vineyards, orchards and horticulture.
Features:
Excellent digging ability.
Easy ratchet gang adjustment.
Available in 16, 20 and 24 plate models.
Buster tine removes centre ridge to create a level finish.
Solid cast spools are individually machined to suit the disc for
extra strength.
230mm (9 inch) spacing.
Fitted with 560mm x 5mm (22 inches x 3/16 inch) scalloped discs as standard.
28mm square high tensile gang bolts.
Triple sealed bearings.
Options:
0948 Optional Scrapers suit 20 plate TH30
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH30 20 PLATE HEAVY DUTY TANDEM DISCS - 0815

Designed for extremely tough conditions and is one of the strongest linkage disc ploughs available. Heavy weighted gangs provide excellent digging ability.
Features:
Each machine takes approximately 2-3HP per disc to pull, depending on conditions.
Prong scrapers are also available for heavy clay soil.
Twin spring loaded pressure screws prevent damage in rocky or undulating conditions.
Easy gang angle adjustment.
Fitted with hard wearing European Bellota Boron discs at 9 inch spacing. Available in 22x5mm(or optional 24x5mm sizes).
Cat 1 & 2 linkage.
28mm square high tensile axles.
Greaseable flanged disc bearings with excellent sealing to exclude contaminants.
Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings.
Specifications:
Disc Size 22inch dia, 5mm thick, Scallop Disc
Approx Weight- 820kg
No. Bearings 6
No. Axles 2
Cutting Width 2.06m(6ft 9inch)
Options:
0947 Optional Scrapers suit 18 plate GM40.
0953 Optional Furrow filler (not sold separately).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GM40 18 PLATE HEAVY DUTY OFFSET DISCS - 0810, 2-3HP PER DISC

Features:
100 HP multi speed gearbox (540 RPM).
1880mm working width.
42 x L blades total.
Side gear drive.
CE safety guards.
Rear door with spring & pin adjustment.
Floating front hitches.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 50-100 HP
Working Width (mm): 1880
Working Depth (mm): 100-250
Product Weight (kg): 630
Total Width (mm): 2070
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.88M B103 ROTARY HOE (MIN 50- 100HP)

The stump jump chisel plough is an ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.
Features:
11 Tines at 12 adjustable spacings.
Heavy Duty 75x75x6mm Frame.
Cat 1 & 2 Linkage.
65mm Reversible Points as standard.
Silicone chrome spring steel shanks.
Horsepower requirement is approximately 8-10 HP per tine.
Excellent underframe trash clearance of 520mm.
Adjustable spring is designed to give a longer, more progressive action, actually chiselling as the machine moves through the ground.
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18).
Options:
Depth Wheels (Pair Holden)
10x8mm Dart Point
16x8mm Sweep
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 11'9" (3.5M) WIDTH - 0198

Information on the Series 09 Chain Harrow:
- It is a multipurpose tool and an important element in Pasture maintenance. Versatile in its own right as a means of spreading organic matter and levelling seedbeds,
- Murray Chain Harrows are beneficial in strip grazed pasture situations and a useful adjunct to efficient harvesting of clover seed by vacuum harvesters.
- Ideal in direct drilling operations, Murray Chain Harrows are effective in spreading and gently levelling the soil after the important final operation of seeding.
- Three depths of chain sections are available 0.76m (2ft 6in), 1.5m (5ft) and 2.28m (7ft 6in), with each providing a different level of aggression and pulverisation to suit individual requirements.
- Chain sections are available in 6 convenient widths between 1.52m (5ft) and 6.09m (20ft).
- 100% Australian made and owned.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

Series 09 Chain Harrow System (Category L, P). Complete set includes front drag type drawbar & mesh chain section.
Specifications:
- Available in 3 depths 0.76m (2ft 6in), 1.5m (5ft) and 2.28m (7ft 6in)
- Centre to Centre of Front Hooks 190mm (7 1/2in)
Features:
- High Carbon 10mm Square Steel.
Options for this listing:
Complete Set (0.76m Deep mesh chain, 1 spreader bar):
9126 - 1.52m (this listings price) 49kg
9127 - 2.44m (call for price) 75kg
9128 - 3.04m (call for price) 102kg
9129 - 3.65m (call for price) 130kg
9130 - 4.57m (call for price) 174kg
9145 - 6.09m (call for price) 236kg
Mesh Chain Only for 0.76m mesh:
9101 - suits 1.52m (call for price) 38kg
9102 - suits 2.44m (call for price) 58kg
9103 - suits 3.04m (call for price) 75kg
9104 - suits 3.65m (call for price) 96kg
9105 - suits 4.57m (call for price) 110kg
9142 - suits 6.09m (call for price) 146kg
Complete Set (1.5m Deep mesh chain, 2 spreader bars):
9131 - 1.52m (call for price) 89kg
9132 - 2.44m (call for price) 120kg
9133 - 3.04m (call for price) 155kg
9134 - 3.65m (call for price) 194kg
9135 - 4.57m (call for price) 255kg
9146 - 6.09m (call for price) 344kg
Mesh Chain Only for 1.5m mesh:
9106 - suits 1.52m (call for price) 78kg
9107 - suits 2.44m (call for price) 103kg
9108 - suits 3.04m (call for price) 128kg
9109 - suits 3.65m (call for price) 160kg
9110 - suits 4.57m (call for price) 191kg
9143 - suits 6.09m (call for price) 254kg
Complete Set (2.28m Deep mesh chain, 2 spreader bars):
9136 - 1.52m (call for price) 129kg
9137 - 2.44m (call for price) 202kg
9138 - 3.04m (call for price) 258kg
9139 - 3.65m (call for price) 292kg
9140 - 4.57m (call for price) 384kg
9147 - 6.09m (call for price) 529kg
Mesh Chain Only for 2.28m mesh:
9111 - suits 1.52m (call for price) 118kg
9112 - suits 2.44m (call for price) 185kg
9113 - suits 3.04m (call for price) 231kg
9114 - suits 3.65m (call for price) 258kg
9115 - suits 4.57m (call for price) 320kg
9144 - suits 6.09m (call for price) 439kg
Drawbars Only:
9121 - suits 1.52m (call for price) 11kg
9122 - suits 2.44m (call for price) 17kg
9123 - suits 3.04m (call for price) 27kg
9124 - suits 3.65m (call for price) 34kg
9125 - suits 4.57m (call for price) 64kg
9141 - suits 6.09m (call for price) 90kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 1.52M SERIES 09 CHAIN HARROW SYSTEMS COMPLETE SET (1.5M - 6.09M)

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 16
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
1.6m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR - MIN 32HP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

4.19m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3509 - 4.19m (13ft 9in)(20Row) 2/12 Tine, 3/16 Tine - 80kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 36
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
3.6m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.6M S-TINE (36 TINES) STANDARD CULTIVATOR - MIN 72HP

Homeowner or commercial gardening
Landscaping or soil conditioning
Orchard or vineyard clean-up
Benefits:
All sizes available in either standard or reverse rotation
Designed for use on 25-65 PTO horsepower tractors
Six hardened L blades per rotor flange
Cast Iron gearbox housing
Front to rear hitch points are continuously welded to mainframe.
Metal debris deflector (on Reverse model only)
CAT 1 Standard and QH (1.5 m & 1.8 m models), CAT 1 & 2 Standard and QH (2 m model)
Slip Clutch driveline protection is standard
13 mm Steel end plates
Strong all gear drivetrain featuring double lip seals on each end of the rotor shaft
Model:
RHREB72 1.8m 340kg 35/55HP Painted Finish
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RHINO 1.8M REBEL ROTARY HOE (35-55HP)

The Doble rotary hoe is well suited to rugged conditions such as sugar cane, cotton, broadacre and large vegetable farms.
Its purpose built with two robust side frames that hydraulically fold for transport and storage.
Specifications:
Tractor HP: 150-220 HP
Connection Type: Linkage
Gearbox: single speed (1000 RPM)
Working Width: 3600mm
Working Depth: 100-200mm
Blades: 84 x L
Folded Width for Transport: 2680mm
Weight: 2070kg
Features:
- 220HP single speed gearbox (1000 RPM)
- 6 L blades per flange with double flanges
- Side gear drives
- 1 3/4" 20 spline PTO with cam clutch
- Store folded
- Wheel track eradicators
- Hardox rotor supports
- Duo cone seals
Options:
- Cage roller (450mm)
- Packer roller (500mm)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 3.6M DOBLE FOLDING ROTARY HOE (150-220HP)

350 series Mekfold Folding Power Harrow with 450mm cage roller.
Specifications:
Tractor HP: 220-350
Working Width: 5920mm
Folded Width for Transport: 2500
Working Depth: 100-300
Blades: 48
Weight: 3230kg
Features:
- Single speed central gearbox (1000 RPM) and multi speed side gearboxes.
- Phased rotors.
- Stone protection system.
- Levelling bar standard.
- Floating side shields.
- Folded width 250cm.
- 450mm Cage roller standard.
- Konic - tapered roller bearings on MEKFOLD350.
- 1 3/4" 20 spline PTO with cam clutch.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 6M MEKFOLD350 POWER HARROW (220-350HP) WITH 450MM CAGE ROLLER

Find Tillage AND Seeding For Sale. Browse 984 Tillage AND Seeding listings from Farm Supplies Machinery & Equipment.

New & Used Tillage AND Seeding For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS TH30 20 PLATE HEAVY DUTY TANDEM DISCS - 0815

JOHN BERENDS GM40 18 PLATE HEAVY DUTY OFFSET DISCS - 0810, 2-3HP PER DISC

BREVIGLIERI 1.88M B103 ROTARY HOE (MIN 50- 100HP)

JOHN BERENDS STUMP JUMP CHISEL PLOUGHS 11'9" (3.5M) WIDTH - 0198

MURRAY 1.52M SERIES 09 CHAIN HARROW SYSTEMS COMPLETE SET (1.5M - 6.09M)

JOHN BERENDS 1.6M S-TINE (16 TINES) STANDARD CULTIVATOR - MIN 32HP

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

JOHN BERENDS 3.6M S-TINE (36 TINES) STANDARD CULTIVATOR - MIN 72HP

RHINO 1.8M REBEL ROTARY HOE (35-55HP)

BREVIGLIERI 3.6M DOBLE FOLDING ROTARY HOE (150-220HP)

BREVIGLIERI 6M MEKFOLD350 POWER HARROW (220-350HP) WITH 450MM CAGE ROLLER

Farm Supplies Machinery & Equipment

Dealer Address