Farm Supplies Machinery & Equipment

Light duty Ripper suited for 18-40hp tractors
Solid steel main billet 100mm x 25mm
Cat 1 hook up
Medium tensile ripper point welded to main billet
300mm Ripping depth
Light Duty Suited For 18-40HP Tractors
LSR-900 0.1m x .025m 0.4m depth 40kg 18HP Green/Red
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP SINGLE TYNE RIPPER - SUITS 18-40HP - LSR-900

Rippers enable you to do a lot of hard work with minimum effort. Ideal for breaking up hard ground, ripping up stumps or rock, planting trees, laying polythene pipe or removing rabbit warrens.
Ideally the ripper should be run through the ground prior to pipelaying to ensure there are no obstacles, and the required depth can be maintained.
The pipelayer is easy to take on and off for this reason. Pipelayer takes 50mm Poly Pipe. The pipe is usually rolled out next to the hole either over the tractor or with a second person feeding it from the side.
Specifications:
Designed to suit 25-70hp tractors (Cat 1 linkage with Cat 2 bushes).
150 x 32 Billet.
Reversible point.
225mm x 75mm x 16mm.
Weight: 72kg.
Max. working depth: 500mm.
Both items can be purchased individually.
0020 Standard Single Tine Ripper, 150 x 32mm tine, Cat 1-2
0022 Pipelaying attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STD SINGLE TINE RIPPER AND PIPELAYER - 0020-0022

Rata Hydraulic Access mole ploughs - Made in New Zealand
Designed for fast, efficient sub soil drainage, where a suitable clay subsoil is found. Leaving a very clean entry and exit from the ground.
The blade can be extended to the rear of the frame to allow the operator to move the mole plough under a single wire fence and lower the blade into an open drain, to start pulling the mole plough through the ground.
The long robust frame with a full floating headstock allows for ground contour following.
450mm Working Depth.
The Quickleg blade design is a standard feature on Rata Mole Ploughs. Quickleg blades remove the need for pasture pre-cutters due to its unique self cleaning design. This enables you to mole plough faster and turn corners.
The mole drain is created by a 75mm cast and hardened plug. This mole plug has the ability to revolve and float which ensures even wearing and allows it to follow natural contours of the ground.
The leading edge of the Mole Plough is a cast Ni-hard winged point. Being cast Ni-hard ensures high wear resistance in abrasive soils while the point wings help get & keep the leg and plug into the ground.
Featuring a heavy duty twin RHS box section frame with extensive gusseting and bracing. This twin RHS frame prevents twisting and flex while in the ground as found with other mole plough types.
All grease points are located in easy to access areas to ensure that maintenance is fast and trouble free.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA HYDRAULIC ACCESS MOLE PLOUGH

Murray heavy duty adjustable single tine ripper.
Features:
- Cat II & III
- Comes with pins
- Adjustable depth of 210-360mm
- Australian made
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY ADJUSTABLE HEAVY DUTY SINGLE TINE RIPPER

Farm Aid single tine rippers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
FA106 Heavy Duty Single Tine Ripper
Cat 2
Suits 60+ HP tractors
150 x 50 billet
Working depth: 700 mm
Reversible Point: 225mm x 75mm x 16mm
Suits our Farm-Aid FA100 Pipelayer (100mm ID Pipelayer suits 70mm OD Poly Pipe).
Also suits Berends 0022 Pipelayer (50mm OD poly pipe).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID SINGLE TINE RIPPER (HEAVY DUTY) - SUITS OVER 60HP - FA106

MR300- MR Series linkage ripper, 3 tyne, 125 x 125 x 9mm toolbar, adjustable height tynes, leading bevel edge profiled tynes.
The Jarrett MR series rippers are designed for larger area general farm ripping and subsoil aerating. The unique optional Mole attachment allows easy poly pipe laying.
Features:
- Robust construction
- Reversible point
- High strength 150x32mm steel tyne(s) with bevelled leading edge
- 125x9mm RHS frame (MR)
Options:
- Ripper mole
- Laying Poly Pipe with the Mole Drainer
Specifications:
- 3 Tynes
- Weight: 310kg
- 60hp min required
- Cat 2
- 1.8m Frame
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS RIPPER 3 TYNE LINKAGE MR SERIES, MIN 60HP - MR300

MR200- MR Series linkage ripper, 2 tyne, 125x125x9mm toolbar, adjustable height tynes, leading bevel edge profiled tynes.
The Jarrett MR series rippers are designed for larger area general farm ripping and subsoil aerating. The unique optional Mole attachment allows easy poly pipe laying.
Features:
- Robust construction
- Reversible point
- High strength 150x32mm steel tyne(s) with bevelled leading edge
- 125x9mm RHS frame (MR)
Options:
- Ripper mole
- Laying Poly Pipe with the Mole Drainer
Specifications:
- 2 Tynes
- Weight: 250kg
- 40hp min required
- Cat 2
- 1.8m Frame
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS RIPPER 2 TYNE LINKAGE MR SERIES, MIN 40HP - MR200

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 360cm
Required HP: 240-350hp
Weight: 2595kg
No of Blades: 9
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

Single Tyne Ripper (up to 40HP) Features:
This single tine ripper is rated for tractors up to 40HP.
Ripping tip is replaceable, but one tip included in this price
Max depth 400mm (tractor dependent).
Category one pins supplied.
Pipe layer attachment is available as an option.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 3-PT LINKAGE SINGLE TINE RIPPER - SUIT UP TO 40HP

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 310cm
Required HP: 200-350hp
Weight: 2350kg
No of Blades: 7
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.1M (200-350HP) ALCE-P RIPPER / SUBSOILER

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 360cm
Required HP: 220-350hp
Weight: 2475kg
No of Blades: 7
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.6M (220-350HP) ALCE-P RIPPER / SUBSOILER

SR100 - SR Series Linkage Ripper - Fabricated tower, adjustable height tyne, leading bevel edge profile tynes.
The Jarrett SR Series rippers are designed for medium duty ripping and subsoil aerating. The unique optional Mole attachment allows easy poly pipe laying.
Features:
- Robust construction
- Reversible point
- High strength 150x32mm steel tyne(s) with bevelled leading edge
Options:
- Ripper mole
- Laying Poly Pipe with the Mole Drainer
Specifications:
- 1 Tyne
- Weight: 100kg
- 20-60hp min required
- Cat 1/2
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS RIPPER SINGLE TYNE LINKAGE SR SERIES, MIN 20-60HP - SR100

Find Rippers For Sale from Farm Supplies Machinery & Equipment.

New & Used Rippers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

FIELDQUIP SINGLE TYNE RIPPER - SUITS 18-40HP - LSR-900

JOHN BERENDS STD SINGLE TINE RIPPER AND PIPELAYER - 0020-0022

RATA HYDRAULIC ACCESS MOLE PLOUGH

MURRAY ADJUSTABLE HEAVY DUTY SINGLE TINE RIPPER

FARM-AID SINGLE TINE RIPPER (HEAVY DUTY) - SUITS OVER 60HP - FA106

JARRETT IMPLEMENTS RIPPER 3 TYNE LINKAGE MR SERIES, MIN 60HP - MR300

JARRETT IMPLEMENTS RIPPER 2 TYNE LINKAGE MR SERIES, MIN 40HP - MR200

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

SOUTHERN CROSS AG MACHINERY 3-PT LINKAGE SINGLE TINE RIPPER - SUIT UP TO 40HP

CELLI 3.1M (200-350HP) ALCE-P RIPPER / SUBSOILER

CELLI 3.6M (220-350HP) ALCE-P RIPPER / SUBSOILER

JARRETT IMPLEMENTS RIPPER SINGLE TYNE LINKAGE SR SERIES, MIN 20-60HP - SR100

Farm Supplies Machinery & Equipment

Dealer Address