Farm Supplies Machinery & Equipment

Pipe Layer Attachment. Ideally the ripper should be run through the ground prior to pipe laying to ensure there are no obstacles and the required depth can be maintained. The pipe layer is easy to put on and take off the ripper for this reason. The pipe is usually rolled out next to the hole either over the tractor or with a second operator feeding it from the side
Pipelayer takes 70mm Poly Pipe.
Farm Aid pipe layers are entirely Australian products. Designed and manufactured by our team here in Coopers Plains from Australian Materials.
Features:
Bolt on pipe layer suits all single tine rippers
Suits Standard & Heavy Duty Ripper
Farm-Aid pipe layer also suits Berends single tine rippers.
Pipelayer takes 70mm Poly Pipe.
Additional information
Weight 40 kg
Dimensions 124 × 83 × 31 cm
Models:
FA100 (70mm OD pipe) (Suits Farm-Aid Standard FA105 and Heavy Duty Ripper FA106)
No corners have been cut in their construction. They are built to serve and built to last.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID PIPE LAYER - FA100

Rata Hydraulic Access mole ploughs - Made in New Zealand
Designed for fast, efficient sub soil drainage, where a suitable clay subsoil is found. Leaving a very clean entry and exit from the ground.
The blade can be extended to the rear of the frame to allow the operator to move the mole plough under a single wire fence and lower the blade into an open drain, to start pulling the mole plough through the ground.
The long robust frame with a full floating headstock allows for ground contour following.
450mm Working Depth.
The Quickleg blade design is a standard feature on Rata Mole Ploughs. Quickleg blades remove the need for pasture pre-cutters due to its unique self cleaning design. This enables you to mole plough faster and turn corners.
The mole drain is created by a 75mm cast and hardened plug. This mole plug has the ability to revolve and float which ensures even wearing and allows it to follow natural contours of the ground.
The leading edge of the Mole Plough is a cast Ni-hard winged point. Being cast Ni-hard ensures high wear resistance in abrasive soils while the point wings help get & keep the leg and plug into the ground.
Featuring a heavy duty twin RHS box section frame with extensive gusseting and bracing. This twin RHS frame prevents twisting and flex while in the ground as found with other mole plough types.
All grease points are located in easy to access areas to ensure that maintenance is fast and trouble free.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA HYDRAULIC ACCESS MOLE PLOUGH

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 310cm
Required HP: 200-350hp
Weight: 2350kg
No of Blades: 7
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.1M (200-350HP) ALCE-P RIPPER / SUBSOILER

Single Tine Ripper (Standard)
Designed to suits 30-90 HP tractors
Cat1 linkage with Cat 2 bushes
150 x 32 billet
Working depth: 500 mm
Reversible Point: 225mm x 75mm x 16mm
Weight 72 kg
Suits our Farm-Aid FA100 Pipelayer (70mm OD poly pipe).
Also suits Berends 0022 Pipelayer (50mm OD poly pipe).
Farm Aid single tine rippers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FARM-AID SINGLE TINE RIPPER (STANDARD) - SUITS 30-90HP - FA105

Light duty Ripper suited for 18-40hp tractors
Solid steel main billet 100mm x 25mm
Cat 1 hook up
Medium tensile ripper point welded to main billet
300mm Ripping depth
Light Duty Suited For 18-40HP Tractors
LSR-900 0.1m x .025m 0.4m depth 40kg 18HP Green/Red
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP SINGLE TYNE RIPPER - SUITS 18-40HP - LSR-900

STR500 - Heavy Duty Ripper + PLY500 Pipe Layer
Suited for 35-85hp tractors
Solid steel main billet 150mm x 32mm
CAT I and II
Heat treated replaceable and reversible chisel point
600mm Ripping depth
Heavy RHS Cross bar 100mmm x 100mm x 6mm
Weight 60kg
Available Painted Green or Red
PLY500 - Heavy Duty Pipelayer
- 70mm Pipe opening (suits 40mm OD Pipe) 20kg
- Available Painted Green or Red
Also available to purchase separately
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP SINGLE TYNE RIPPER & PIPELAYER - SUITS 35-85HP - STR500

Rippers enable you to do a lot of hard work with minimum effort. Ideal for breaking up hard ground, ripping up stumps or rock, planting trees, laying polythene pipe or removing rabbit warrens.
Ideally the ripper should be run through the ground prior to pipelaying to ensure there are no obstacles, and the required depth can be maintained.
The pipelayer is easy to take on and off for this reason. Pipelayer takes 50mm Poly Pipe. The pipe is usually rolled out next to the hole either over the tractor or with a second person feeding it from the side.
Specifications:
Designed to suit 25-70hp tractors (Cat 1 linkage with Cat 2 bushes).
150 x 32 Billet.
Reversible point.
225mm x 75mm x 16mm.
Weight: 72kg.
Max. working depth: 500mm.
Both items can be purchased individually.
0020 Standard Single Tine Ripper, 150 x 32mm tine, Cat 1-2
0022 Pipelaying attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STD SINGLE TINE RIPPER AND PIPELAYER - 0020-0022

Tillage Series 3 Tine Ripper FieldQuip TTR500
Features:
Rugged construction
Three (3) 225mm (9in) reversible points
150 x 32 tines with chamfered edge
Category 2 linkage
Rips to 0.6 metre
Suits tractors up to 90hp
Adjustable tine height
Model:
TTR500 0.15m x 32 Tines 0.9m depth 160kg -40-90HP
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FIELDQUIP TILLAGE SERIES 3 TINE RIPPER - TTR500

Rata Double Mole Ploughs - Made in New Zealand
Rata Hydraulic Double Mole Ploughs are designed for fast, efficient subsoil drainage where a suitable clay subsoil is found.
Leaving a very clean entry and exit from the ground, the fully floating headstock with long double bar RHS frames allow for smooth ground contour following. Creating a stronger and longer lasting mole drain.
Double Mole Ploughs are ideal for those who need to install mole drains at twice the efficiency of a single mole plough.
Double Mole Ploughs are equipped with the Quickleg blade.
450mm working depth
Hydraulic blade actuation makes adjusting the mole plough easy via hydraulic ram with additional manual blade depth adjustment.
The Quickleg blade design is a standard feature on Rata Mole Ploughs. Quickleg blades remove the need for pasture pre-cutters due to its unique self cleaning design. This enables you to mole plough faster and turn corners.
The mole drain is created by a 75mm cast and hardened plug. This mole plug has the ability to revolve and float which ensures even wearing and allows it to follow natural contours of the ground.
The leading edge of the Mole Plough is a cast Ni-hard winged point. Being cast Ni-hard ensures high wear resistance in abrasive soils while the point wings help get & keep the leg and plug into the ground.
Featuring a heavy duty twin RHS box section frame with extensive gusseting and bracing. This twin RHS frame prevents twisting and flex while in the ground as found with other mole plough types.
All grease points are located in easy to access areas to ensure that maintenance is fast and trouble free.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA DOUBLE MOLE PLOUGH (HYDRAULIC ACCESS MODEL)

Single Tyne Ripper (up to 100HP) Features:
This single tyne ripper is rated for tractors up to 100HP. Pipe layer attachments are available.
Ripping tip is replaceable and the leading edge of ripping tyne is bevelled for ease of use. Max depth 600mm (tractor dependent).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SOUTHERN CROSS AG MACHINERY 3-PT LINKAGE SINGLE TINE RIPPER - SUIT UP TO 100HP

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 360cm
Required HP: 240-350hp
Weight: 2595kg
No of Blades: 9
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

Murray heavy duty adjustable single tine ripper.
Features:
- Cat II & III
- Comes with pins
- Adjustable depth of 210-360mm
- Australian made
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY ADJUSTABLE HEAVY DUTY SINGLE TINE RIPPER

Find Rippers For Sale from Farm Supplies Machinery & Equipment.

New & Used Rippers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

FARM-AID PIPE LAYER - FA100

RATA HYDRAULIC ACCESS MOLE PLOUGH

CELLI 3.1M (200-350HP) ALCE-P RIPPER / SUBSOILER

FARM-AID SINGLE TINE RIPPER (STANDARD) - SUITS 30-90HP - FA105

FIELDQUIP SINGLE TYNE RIPPER - SUITS 18-40HP - LSR-900

FIELDQUIP SINGLE TYNE RIPPER & PIPELAYER - SUITS 35-85HP - STR500

JOHN BERENDS STD SINGLE TINE RIPPER AND PIPELAYER - 0020-0022

FIELDQUIP TILLAGE SERIES 3 TINE RIPPER - TTR500

RATA DOUBLE MOLE PLOUGH (HYDRAULIC ACCESS MODEL)

SOUTHERN CROSS AG MACHINERY 3-PT LINKAGE SINGLE TINE RIPPER - SUIT UP TO 100HP

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

MURRAY ADJUSTABLE HEAVY DUTY SINGLE TINE RIPPER

Farm Supplies Machinery & Equipment

Dealer Address