Farm Supplies Machinery & Equipment

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 270cm
Working Width: 250cm
Required HP: 85hp
Weight: 915kg
No of Blades: 22
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

The heavy MU-H Vario series is the robust universal mulcher for green area maintenance for tractors and special system vehicles up to 90 hp.
This work horse for daily use in the widest possible range of mowing and mulching work has side shift, front and rear mounting, heavy fully proven universal M-Hammer flails and the patented "Shark fin" shredding bar system as standard.
Consequently this mulcher is not only capable of working perfectly on lawns, meadows and overgrown areas but also on fallow surfaces with woody growth and light scrub. The biomass is heavily shredded and spread evenly over the surface behind the roller.
Features:
Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 280: 56 cm (as shown)
Gearbox with integrated over run clutch and through drive for 540 / 1000 r.p.m.
Belt protection with tension measuring slot
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
Roller with internal bearings System Starinth and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar
System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards
Carbide wearing skids (removable)
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Hydraulic side shift (MU-H 220 Vario: 56cm)
Shock absorbing linkage springs (for front mount recommended)
MU-SOFA weight transfer system, recommended for font-mounted machines
Double free wheel gear box for PTO rotational direction
Modification of r.p.m/rotation direction
Rotor with triple Y-blades - additional charge
Rotor with triple M shackle flails - additional charge
Dust protection for front mounting MU-H 180 -220 Vario
Second patented removable shredding bar system: "Shark Fin"
Hood wearing plate (factory mounted)
Model:
MU-H 120 WW 1200mm Overall width 1370mm Max hp 90 Weight 380 kg Flails 10
MU-H 140 WW 1400mm Overall width 1570mm Max hp 90 Weight 400 kg Flails 12
MU-H 150 WW 1500mm Overall width 1670mm Max hp 90 Weight 415 kg Flails 12
MU-H 160 WW 1770mm Overall width 1770mm Max hp 90 Weight 430 kg Flails 14
MU-H 180 WW 1970mm Overall width 1970mm Max hp 90 Weight 530 kg Flails 16
MU-H 200 WW 2200mm Overall width 2370mm Max hp 90 Weight 505 kg Flails 18
MU-H 220 WW 2200mm Overall width 2370mm Max hp 90 Weight 575 kg Flails 18
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H VARIO 120 MULCHER (35-90HP) REAR OR FRONT MOUNT

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

The Nobili BV PRO series mulchers are a heavy duty multi-purpose machine used for road side mulching by councils and ideal for orchard use.
A double skin improves durability and height control is adjustable with a full width roller with removable ends. Two mulching bars and a restrictor bar are fitted to produce a finer mulch.
The BV PRO has side shift to the right with a hydraulic side shift option.
Features:
Suggested Use: Grass and green pruning's up to 100mm diameter.
Construction: Low profile body, double skin, two mulching bars and one restrictor bar.
Control: Manual side shift with optional hydraulic side shift.
Drive Line: PTO drive shaft with durable safety cover, heavy duty gearbox fitted with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I and II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Blades: 24 Cast Hammers
Min PTO HP: 75-130 HP
Working Width (mm): 1900
Overall Width (mm): 2127
Product Weight (kg): 970
Options:
Hydraulic Side Shift
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BV PRO ORCHARD MULCHERS 1.9M - BV2000/06, 75-130HP

The Nobili BK series mulcher is a heavy duty multi-purpose machine, fitted with maintenance free bearings. The BK is fitted with an opening tailboard and a mulching bar is fitted to produce a fine mulch.
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 90mm diameter.
Construction: High profile body, opening tailboard and one mulching bar.
Control: Two position fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Category II three point linkage, 2 position manual fixed headstock with floating top link.
Height Control: Skids.
Specifications:
Connection Type: Linkage
Tractor HP: 90-160 HP
Working Width (mm): 2792
Blades (Y with Straight): 64/32
Product Weight (kg): 1100
Width / Depth / Height (mm): 2998 / 1505 / 784
Options:
Full Width Roller
Semi Swivel Wheels
Wear Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI BK MULTI-PURPOSE MULCHERS 2.8M - BK280/012, 90-160HP

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features:
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0128 Cyclomatic 2400 (8) Offset Mulcher
Specifications:
Cutting Width: 2.35m
Overall Width: 2.6m
Body Height: 500mm
Weight: 580kg
Tractor HP Range: 64-96
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 56
No of Tee Hammers (Flails) (Optional): 28
No of SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 2400 (8') CENTRE LINE MULCHER - 0129, 64-96HP

Multi purpose reversible side-shift mulcher, for tractors from 60-100hp. Suitable for mowing grass and mulching pruning's and woods up to 80mm diameter.
Specifications:
Actual Width: 236cm
Working Width: 220cm
Required HP: 60-100hp
Weight: 760kg
No of Blades: 20
Features:
100hp Rated gearbox with rear PTO
Double hitch (front and rear) 3-point linkage (cat2)
Integrated over-run clutch
Hydraulic side shift
Fixed front counter blades
replaceable upper counter blades
Double skinned chassis
Adjustable rear roller for cutting height
Side skids
4 belt side transmission
Hydraulic side shift
540rpm PTO
Front protection chains
Flat hammer flails
Options In Lieu of Standard:
Set of 2 front steel wheels
Y flails in lieu of hammer flails
Models:
GEMINI/SR220 220cm Working width 60-100hp 760kg 20 Blades
GEMINI/SR250 250cm Working width 70-100hp 845kg 22 Blades
GEMINI/SR300 300cm Working width 90-100hp 980kg 28 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.2M (60-100HP) GEMINI REVERSIBLE MULCHER

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0122 Cyclomatic 1800 (6) Centre Line Mulcher
Specifications:
Cutting Width: 1.75m
Overall Width: 2m
Body Height: 500mm
Weight: 490kg
Tractor HP Range: 48-72
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 40
No of Tee Hammers (Flails) (Optional): 20
No of SPB vee belts: 3
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 1800 (6') CENTRELINE LOW BODY MULCHER - 48-72HP (0122)

The Nobili rear mount BPR series mulchers are multi-purpose machines ideal for pasture topping with double hitch that fits to the front or rear of the tractor and hydraulic side shift. Suited to tractors up to 175HP with cutting height maintained by rear roller.
Features:
Suggested Use: Grass mowing and green prunings up to 75mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced 8 row rotor.
Control: Hydraulic side shift.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Tractor HP: 90-150 HP
Blades (Cast Hammers): 28
Working Width (mm): 2793
Product Weight (kg): 990
Dimensions WxHxD (mm): 2970W 550H 1300D
NOTE: There is a $770.00 surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.79M BPR MULCHERS (90-150HP)

Nobili TBE are tractor mounted offset machines, fitted on the the three-point tractor linkage and offsetting by a parallelogram arm.
These mulchers are ideal for the shredding of grassy areas and for the maintenance of roadsides, embankments, hedges, meadows as well as gardens. Specialized and sturdy, TBE mulchers are built with high-resistance steel and supported by roller and skids adjusting the working height.
Are constructed in compliance with European Regulations.
Specifications:
Tractor Connection: Linkage (Cat II)
Connecting position: Rear
Engine speed rpm: 540
Tractor horse power HP: 70-110, KW: 51-81
Cast Hammer Blade: 20
Working Width: 1900mm
Weight: 800kg
Features:
Suggested Use: Grass and green prunings up to 40mm diameter.
Construction: Low profile body, double skin & no opening tailboard.
Control: Hydraulic swing arm offset with break away. Inclination adjustment: 65° below horizontal to 90° vertical.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. II three point linkage.
Height Control: Standard roller (standard fitment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.9M TBE MULCHER (SUIT 70-110HP)

The Nobili RM II series mulchers are a robust and versatile machine with a helical blade pattern for a lower power requirement. The RM II is fitted with an opening tailboard, life greased bearings and a mulching bar to produce a fine mulch.
Height control is maintained by adjustable skids.
Features:
Suggested Use: Grass, stubble, pasture topping, vegetable topping, regrowth and green pruning's to 100mm diameter.
Construction: High profile body, opening tailboard and one mulching bar.
Control: Two position fixed headstock.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Category II three point linkage, manually adjustable offset and floating top link.
Height Control: Skids.
Specifications:
Connection Type: Linkage
Tractor HP: 60-130 HP
Blades (Y with Straight): 40/20
Working Width (mm): 1808
Product Weight (kg): 730
Height / Width / Depth (MM): 1325 / 2055 / 800
Options:
Y Blades: 40
Steel Hammer: 20
Full Width Roller
Semi Swivel Wheels
Wear Plate
NOTE: There is a surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 1.8M RM II MULTI-PURPOSE MULCHER (60-130HP)

The MU-FM professional flail mower with linkages for various outfront mowers was developed especially for this purpose.
The two point linkage in connection with the front wheels means that even on uneven land the mulcher can be driven precisely, close to the ground and with a uniform cutting height by virtue of the continuously variable height adjustment of the support roller.
Features:
Manufactured from High Quality QSt/E Steel for Front mounting onto professional Front Mowers with 2 point linkage.
Linkage designed for high lift to clear kerbs.
Gearbox mounted to the rear of the hood complete with integrated over run clutch for 2500 r.p.m.
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
Easy to use variable height adjustment.
Wearing skids.
High tempered spring steel one way protection flaps in front of the mower.
Optimised distance between the outer rotor circle and the roller as well as the linkage parts with wide swivelling range guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and a removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Implement triangle for Tora GM 360 with Quick-Attached-System, left side 1"Z15-additional charge
Headstock with municipal coupling triangle - additional charge
Headstock with A frame Cat.1 N-additional charge
PTO shaft GE 2105 for Grillo,25x22 14-spline-additional charge
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller (only MU-FM 140-160) Additional Charge
Models:
MU-FM 140-31-1-2 WW 1400mm Overall width 1650mm Max hp 40 Weight 220kg Flails 24
MU-FM 160-31-1-2 WW 1600mm Overall width 1850mm Max hp 40 Weight 240kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 160CM MULCHER - SUITS < 40HP - MU-FM160-31-1-2

Find Mulchers For Sale. Browse 256 Mulchers listings from Farm Supplies Machinery & Equipment.

New & Used Mulchers For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

MUTHING MU-H VARIO 120 MULCHER (35-90HP) REAR OR FRONT MOUNT

MUTHING MU-O 180 MULCHER FRONT OR REAR MOUNTING

NOBILI BV PRO ORCHARD MULCHERS 1.9M - BV2000/06, 75-130HP

NOBILI BK MULTI-PURPOSE MULCHERS 2.8M - BK280/012, 90-160HP

JOHN BERENDS CYCLOMATIC 2400 (8') CENTRE LINE MULCHER - 0129, 64-96HP

CELLI 2.2M (60-100HP) GEMINI REVERSIBLE MULCHER

JOHN BERENDS CYCLOMATIC 1800 (6') CENTRELINE LOW BODY MULCHER - 48-72HP (0122)

NOBILI 2.79M BPR MULCHERS (90-150HP)

NOBILI 1.9M TBE MULCHER (SUIT 70-110HP)

NOBILI 1.8M RM II MULTI-PURPOSE MULCHER (60-130HP)

MUTHING 160CM MULCHER - SUITS < 40HP - MU-FM160-31-1-2

Farm Supplies Machinery & Equipment

Dealer Address