Farm Supplies Machinery & Equipment

To suit Telehandler.

Wide Square Bale Forks 4 x Conus II Tines - 1240mm

*Photo is a guide only. The product may differ to the photo.

BURDER TELEHANDLER WIDE SQUARE BALE FORKS 4 X CONUS II TINES - 1240MM

Jarrett GH 2.1m Heavy Duty Grader Blade
Features:
Robust construction
Deep, curved face (corkscrewing = max debris movement)
Reversible cutting edge
Easy side tilt adjustment
Full rotation for push and pull operations
380 x 8 mm, deep, curved face
Easy angle adjustment with 14 positions
70 mm diameter greasable spindle
6 mm, fully boxed, blade gusset
Model: GH 210
Width: 2.1 m
Blade: 380 mm
Weight: 220 kg
Spindle Diameter: 70 mm
Min Pwr: 40 hp
Linkage: Cat 1/2
Options: Scarifiers added to blade
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JARRETT IMPLEMENTS GH210 HEAVY DUTY GRADER BLADE 2.1M

APT 236 Pasture Topper
Made in Australia.
Robust pasture topper for fast clean up of paddocks.
Features:
- All gearbox and shaft driven no vee belts (45HP)
- European gearboxes
- High blade tip speed giving quality cut
- High clearance body to ensure power requirements
- High ratio gear boxes produce optimum blade tip speed.
- 6 series drive shaft with friction clutch.
- Bisalloy 80 blade beams with pivoting blades.
- Cat 1 Clevis hitch 3PL
- Swing back blades
- Floating top link to follow undulations
- Adjustable side skids
Optional extras:
- Full width roller
- Twin height wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGRIFARM PASTURE TOPPER APT SERIES 236CM (45HP) - APT/236

Southern Cross 4ft Slasher - 18-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.0mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 45HP gearbox. Gearbox supplied with oil (85/140 Gear Oil)
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Centre mount
- Front and rear discharge deflectors (chain)
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Structural integrity located under deck with no impact on material flow
- Bare-Co gearbox / slip clutch safety guarding
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Specifications:
- Recommended Tractor (HP) - 18-45
- Cutting Width (mm) - 1160
- Overall Width (mm) - 1350
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360 X 12.7mm (Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 66
- Deck Thickness (mm) - 3.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter Bar
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 215kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 4FT SLASHER, SUIT 18-45HP

Daken 405 Series Slashers - 1.35m 405 Slasher.
Our long experience in slasher design continues with these Daken 405 Series Slasher which are light to medium duty slashers. Built with no under body bracing and with good rotor to body clearance they do a great cutting job.
The 405 series slashers are suitable for many cutting applications for tractors up to 50hp (40hp gearbox). They are not built to a price but fully featured to give you the best possible performance.
Features:
- Built to comply with the stringent Work Cover regulations.
- Gear box 40hp
- Gear box 1.1.93 Ratio
- Body Plate 4mm
- Adjustable skids
- Laminated Rotor
- Floating Headstock
- Can be offset left or right
- 6 two plate slip clutch
- Cat 0/1
- Hot dipped galvanised finish
- Comes with series 4 PTO shaft and Chain guards front and rear.
- Weight = 277 kg
Options:
- Level wheel suits all 405 models
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 1.35M SLASHER 405 SERIES 40HP GALVANISED - 55630DC

500mm - 3 Series Auger up to 5T for 3 point linkage. Light conditions - Earth.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: 3PT Linkage
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

Professional compact tractors. Tractors up to 75hp require efficient, versatile and robust flail mulchers to carry out mowing and mulching work reliably, quickly and economically.
At the same time the equipment should be light so as not to restrict the scope of the system vehicles.
The MU-E mulcher series was created for this range of tractors. A range of options, additional equipment, low weight and strong construction are the typical attributes of this versatile range of mulchers.
Features:
Manufactured from High Quality QSt/E Steel
Headstock Cat. I + II for Rear mounting
Mountable in two positions variable by 30cm (Offset)
Gearbox with integrated over run clutch and through drive 540 RPM. or 1000 RPM
Belt protection with tension measuring slot
Stand
High tempered M Hammer flails
Smooth running Spiral rotor with specially formed lugs
Patented removable shredding bar System: Shark Fin
Roller to carry the flail, adjustable for different heights
High tempered spring steel one way protection flaps in front of the mower
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
P.T.O. shaft and Guarding to ISO Standards
Independently tested and certified for Thrown Objects.
Options:
Modification 540 to 1000 RPM (+ labour charge)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING ECOTOP 180 MULCHER (OFFSET 30CM) SUITS 30-75HP

5' Round Bale Unrolling Frame Burder Std. Euro Conus 1 & 2, 3PL. Requires Front Remotes.

BURDER 5' ROUND BALE UNROLLING FRAME (3PL)

Log Bucket 9000 series (with bolt on removable sides) - 2.10m.

The log bucket is designed for transporting logs and other similar objects.

Specifications:

- Width (m): 2.10m 	
- HP Range: 100+
- Struck Capacity (m3): 0.71
- Rated Capacity (m3): 0.85
- Dimensions LxWxH (mm): 2160x850x740
- Weight (kg): 335

BURDER LOG BUCKET 9000 SERIES 2.10M - 100+ HP RANGE

Standard Bucket 6000 series - 1.80m

The standard or general purpose (GP) bucket is suitable for routine operations such as earth moving and scooping. The standard bucket is fitted with the following to ensure that the bucket stays durable under intense conditions:

Features:

- Stiffening rib
- Wear plates
- Reinforced ends
- Optional teeth upgrade to enhance loading or material handling applications.

Specifications:

- Width (m): 1.80m 	
- HP Range: 20-45	
- Struck Capacity (m3): 0.34	
- Rated Capacity (m3): 0.42
- Dimensions LxWxH (mm):
- Weight (kg): 160

BURDER BUCKET STANDARD 6000 SERIES 1.80M - 40-60 HP RANGE

250mm - 3 Series Auger up to 5T for 3 point linkage. Light conditions - Earth.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: 3PT Linkage
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

Loader Bracket specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOADER BRACKET (PAIR) - REPLACEMENT FOR CLAAS

Find Machinery Attachments For Sale. Browse 1375 Machinery Attachments listings from Farm Supplies Machinery & Equipment.

New & Used Machinery Attachments For Sale in Australia

Farm Supplies Machinery & Equipment

Sale Price

BURDER TELEHANDLER WIDE SQUARE BALE FORKS 4 X CONUS II TINES - 1240MM

JARRETT IMPLEMENTS GH210 HEAVY DUTY GRADER BLADE 2.1M

AGRIFARM PASTURE TOPPER APT SERIES 236CM (45HP) - APT/236

SOUTHERN CROSS AG MACHINERY 4FT SLASHER, SUIT 18-45HP

DAKEN 1.35M SLASHER 405 SERIES 40HP GALVANISED - 55630DC

DIGGA 500MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

MUTHING ECOTOP 180 MULCHER (OFFSET 30CM) SUITS 30-75HP

BURDER 5' ROUND BALE UNROLLING FRAME (3PL)

BURDER LOG BUCKET 9000 SERIES 2.10M - 100+ HP RANGE

BURDER BUCKET STANDARD 6000 SERIES 1.80M - 40-60 HP RANGE

DIGGA 250MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

SPAREX LOADER BRACKET (PAIR) - REPLACEMENT FOR CLAAS

Farm Supplies Machinery & Equipment

Dealer Address